I'm running out of ideas on mine now... well I may try a different output lol
What I am looking at is having a custom front to the player. Maybe some nicely crafted wood or Acrylic. Keep is simple with minimal buttons.
So if anyone knows of some nice case sites I could browse through for ideas or custom built work I would be grateful
cheers
Brent
What I am looking at is having a custom front to the player. Maybe some nicely crafted wood or Acrylic. Keep is simple with minimal buttons.
So if anyone knows of some nice case sites I could browse through for ideas or custom built work I would be grateful
cheers
Brent
You could rebuild it inside a Bush TR82 (my mum still has an original).
Reciva Internet Radio Configuration: Turning a 1960's Bush TR 82 into a Reciva Internet Radio
The tuning dial could be converted into a magnetic puck.
Reciva Internet Radio Configuration: Turning a 1960's Bush TR 82 into a Reciva Internet Radio
The tuning dial could be converted into a magnetic puck.
I could but there is soooo much it would be a nightmare to do now + I can't be without it for long otherwise I get the shakes.
Brent
You could rebuild it inside a Bush TR82 (my mum still has an original).
Reciva Internet Radio Configuration: Turning a 1960's Bush TR 82 into a Reciva Internet Radio
The tuning dial could be converted into a magnetic puck.
That's really cool but the tinny unpleasant sound coming from the nice old radio would confuse people! lol
You could rebuild it inside a Bush TR82 (my mum still has an original).
Reciva Internet Radio Configuration: Turning a 1960's Bush TR 82 into a Reciva Internet Radio
The tuning dial could be converted into a magnetic puck.
LOL
How much?
Brent
All the cases I have seen have been for top-loaders based on the CDMpro.
None for front loaders.
Andy
Guys,
based on my last picture, any benefit on fitting the larger clamp on my CD-x3.?
I've played of wire cutters, caps linking headphone section, muting transistors and asociated parts, used this CD-43 pcb in my CD-53 coax'd mech (to R505) and it's already a bit less harsh and metallic.
Side note, the front panel with IR sensor, a feed resistor (RY11), a transistor (QF61) and a resistor (RF61) are needed to make the RC work on a CD-43 PCB.
Matthieu
based on my last picture, any benefit on fitting the larger clamp on my CD-x3.?
I've played of wire cutters, caps linking headphone section, muting transistors and asociated parts, used this CD-43 pcb in my CD-53 coax'd mech (to R505) and it's already a bit less harsh and metallic.
Side note, the front panel with IR sensor, a feed resistor (RY11), a transistor (QF61) and a resistor (RF61) are needed to make the RC work on a CD-43 PCB.
Matthieu
Why not playing with murdered players' fronts?
http://i497.photobucket.com/albums/rr332/Trunky1812/CD50/IMG_5285.jpg
or champagner's Ian one?
HiFiSounds.co.uk Marantz CD63 CD67 Modification QuadII rebuild
or full polished one then vernished of chromed or anodized? Blue to go with your leds
http://i497.photobucket.com/albums/rr332/Trunky1812/CD50/IMG_5285.jpg
or champagner's Ian one?
HiFiSounds.co.uk Marantz CD63 CD67 Modification QuadII rebuild
or full polished one then vernished of chromed or anodized? Blue to go with your leds
Why not playing with murdered players' fronts?
http://i497.photobucket.com/albums/rr332/Trunky1812/CD50/IMG_5285.jpg
or champagner's Ian one?
HiFiSounds.co.uk Marantz CD63 CD67 Modification QuadII rebuild
or full polished one then vernished of chromed or anodized? Blue to go with your leds
Matthieu! How did you find my photobucket, It's not linked on my website???? Ian
Last edited:
stevief
Hi,
sorry to jump in when this thread seems to have come such a long way but I am a novice looking to install an external clock (rockclock) and external psu.
I have generic instructions but can anyone give some more specific instruction on the cd63 mkII ki sig? What do I physically need to do to the existing clock set-up and where exactly do I take the power supply for the psu from. Pictures would be very useful!
thanks
Hi,
sorry to jump in when this thread seems to have come such a long way but I am a novice looking to install an external clock (rockclock) and external psu
. I have generic instructions but can anyone give some more specific instruction on the cd63 mkII ki sig? What do I physically need to do to the existing clock set-up and where exactly do I take the power supply for the psu from. Pictures would be very useful!
thanks