Hi Dean,
no problem, i will add your requirements at the end of google list.
pl send me your paypal and address details via PM
no problem, i will add your requirements at the end of google list.
pl send me your paypal and address details via PM
yes, sure. i will send out the additional invoice for the THT's.
Thanks, Prasi. Looking forward to getting them. I know it has been frustrating.
Thanks Prasi!
If I'd want to give it a shot or three, what's next? I already signed on in the google-doc GB, will you send a Paypal-request?
david
Hi David,
i see from the google list that i have made 2 entries against your name. please let me know which one to keep.
regards
prasi
Hello Folks ! good news!
international shipping has finally begun, so I am going to go ahead with this GB
LT4320 RECTIFIER AND LT4320 CRC PSU GROUP BUY - Google Sheets
I plan to begin sending paypal invoices 10 a day. Once payment is made, shipping will happen at the earliest opportunity (due to plenty of rush at poastal office).
All updates will be available in the google sheet above.
I know its quite delayed, but better late than never🙂.
If someone would like to withdraw, please let me know (or forever hold your peace...😀).
regards
prasi
Hi all,
updated the google sheet with payment received and shippings done till date.
regards
prasi
Hi to all!
Sorry, stupid questions ahead:
I’m going to use a tht-crc on my F4...
Went through the first 1/3 of the thread on the lookout for a clear favorite.
Found some, „but“ they‘re like „it will work with FW“ but none were really enthusiastic for a certain model...
which one would be „best“?
is it thought the wrong way to look at it, I am not capable to discern quality-differences by the numbers/datasheets...
Sorry, stupid questions ahead:
I’m going to use a tht-crc on my F4...
Went through the first 1/3 of the thread on the lookout for a clear favorite.
Found some, „but“ they‘re like „it will work with FW“ but none were really enthusiastic for a certain model...
which one would be „best“?
is it thought the wrong way to look at it, I am not capable to discern quality-differences by the numbers/datasheets...
Hi Prasi, thanks for the invoice, this will be sorted asap..
may I gently ask you whether some cap-mx boards are available too? I'd be needing 2 to 4 boards please, thanks.
may I gently ask you whether some cap-mx boards are available too? I'd be needing 2 to 4 boards please, thanks.
Hi geoturbo,
i do not have any cap mx pcbs with me.
however i recommend Mark Johnsonson's cap mx which is posted here.
Juma's Easy-Peasy Capacitance Multiplier
bom is in post # 788
there is also an smd version of the design for hpa/ pre posted in the same thread.
i do not have any cap mx pcbs with me.
however i recommend Mark Johnsonson's cap mx which is posted here.
Juma's Easy-Peasy Capacitance Multiplier
bom is in post # 788
there is also an smd version of the design for hpa/ pre posted in the same thread.
Hi Prasi,
Glad you can ship again! Have you closed the GB now?
I see you have me down on the spreadsheet for 2 of something, but I can’t widen the columns to see what. If possible i would like 2 each of the SMD “rectifiers” and two CRC boards.
Thanks,
Francois
Glad you can ship again! Have you closed the GB now?
I see you have me down on the spreadsheet for 2 of something, but I can’t widen the columns to see what. If possible i would like 2 each of the SMD “rectifiers” and two CRC boards.
Thanks,
Francois
Hello Francois,
Yes I have updated the list with 2 LT4320+CRC and 2 SMD along with your earlier requirement of 2 regular CRCRC
regards
prasi
Yes I have updated the list with 2 LT4320+CRC and 2 SMD along with your earlier requirement of 2 regular CRCRC
regards
prasi
Thanks to all for the payments made, I will be shipping 5 packets a day throughout the next week and will be updating the details in the google list periodically.
Hello Francois,
Yes I have updated the list .....
regards
prasi
Wonderful. Thanks very much!
Kind regards.
F.
Hi to all!
Sorry, stupid questions ahead:
I’m going to use a tht-crc on my F4...
Went through the first 1/3 of the thread on the lookout for a clear favorite.
Found some, „but“ they‘re like „it will work with FW“ but none were really enthusiastic for a certain model...
which one would be „best“?
is it thought the wrong way to look at it, I am not capable to discern quality-differences by the numbers/datasheets...
I think member mpa has posted that he is using in a class A amp (Aleph J) and very happy with it. post # 783.
Please let me know how many PCBs you require (LT4320+CRC each, THT-pairs and SMD-pairs) .
As I posted before I seem to have made two entries against your name.
regards
prasi
I think member mpa has posted that he is using in a class A amp (Aleph J) and very happy with it. post # 783.
Hi Prasi
Yes, I remember this post (I was asking the question 🙂 )
This time, I was trying to hear if a certain type of Mosfet had become a favorite of sorts? (I already found several comments saying this or that model works, but none saying it was a perfect match. Maybe because they're all perfect matches?)
Thank you!
david
(PM'd about my group buy. First line is valid)
- Home
- Group Buys
- LT4320 based active rectifier