Grey,
I received the parts yesterday. Just wanted to say thanks for the quick turn around and an even bigger thank you for making these parts available!
David.
I received the parts yesterday. Just wanted to say thanks for the quick turn around and an even bigger thank you for making these parts available!
David.
korben69 said:As told before, I've to stop registering orders for the GB.
.. so I got back to the computer a few hours too late. 🙁 Thanks nevertheless for giving a few hours time the opportunity to join in.
Greetings,
Chris
Davidf1111,
You're welcome...
jameshillj,
Could you give me a current total (yes, I know you've set the 29th as the end). This is getting close. I've got korben69 covered, but your last tally showed 160 and I'm getting close to the end of my stock.
NOTE****NOTE****NOTE
Those who have placed individual orders with me are okay. This is a first-come, first-served situation and you guys got there first. The only question at this time is how many I'll be able to provide jameshillj.
Grey
You're welcome...
jameshillj,
Could you give me a current total (yes, I know you've set the 29th as the end). This is getting close. I've got korben69 covered, but your last tally showed 160 and I'm getting close to the end of my stock.
NOTE****NOTE****NOTE
Those who have placed individual orders with me are okay. This is a first-come, first-served situation and you guys got there first. The only question at this time is how many I'll be able to provide jameshillj.
Grey
Jfet tally
Grey,
As of last night, the total is 180 units, and with a few spares, I'd like to increase this to a round 200, if you would have enough.
Regards ... James
Grey,
As of last night, the total is 180 units, and with a few spares, I'd like to increase this to a round 200, if you would have enough.
Regards ... James
Hmmm...
Let's see if everyone who has placed an order pays up. Not all of them do. I should know in a day or two how things stand.
Grey
Let's see if everyone who has placed an order pays up. Not all of them do. I should know in a day or two how things stand.
Grey
Okay, for some reason (we all know it's just normal human nature) people are falling out of the sky ordering parts now that I'm saying that we're near the end of the line.
Therefore...
ALL ORDERS OTHER THAN THE ONES MENTIONED ABOVE ARE GOING TO BE PUT ON HOLD.
I have enough to cover the individual orders I received up through a day or two ago. I have enough to cover the group buy going to korben69. I have enough to cover some...maybe all...of jameshillj's group buy. We'll see how some of the details shake out.
BUT...
If you order now, you are (probably) too late. I will keep your e-mails and if parts are available, I will offer them on a first-come, first-served basis.
I do NOT have immediate plans to reorder from Lovoltech (aka QSpeed). I may or may not do so. It depends on about a thousand other factors, many beyond my control. For those who came to the game late...sorry. For those who ordered earlier, but never paid...tough luck.
Grey
Therefore...
ALL ORDERS OTHER THAN THE ONES MENTIONED ABOVE ARE GOING TO BE PUT ON HOLD.
I have enough to cover the individual orders I received up through a day or two ago. I have enough to cover the group buy going to korben69. I have enough to cover some...maybe all...of jameshillj's group buy. We'll see how some of the details shake out.
BUT...
If you order now, you are (probably) too late. I will keep your e-mails and if parts are available, I will offer them on a first-come, first-served basis.
I do NOT have immediate plans to reorder from Lovoltech (aka QSpeed). I may or may not do so. It depends on about a thousand other factors, many beyond my control. For those who came to the game late...sorry. For those who ordered earlier, but never paid...tough luck.
Grey
I suppose I should have anticipated this, but I didn't. I've had e-mails from individuals who have orders in-process wanting to retroactively increase the number of devices they've ordered. Their logic, it seems, is that they got in line ahead of other people (true), so they should be able to increase their orders even if it means denying parts to other people who already have legitimate orders (false). All such requests are being treated as though they are new orders; they are on hold until the dust settles.
To anyone else who might be thinking that they want to increase a pre-existing order, the answer is NO.
At this time jameshillj is the last person to have gotten "in line" and I'm not even sure I'm going to be able to fill his entire order.
I have individual orders in hand that have paid (but whose checks have not cleared yet) and I have a small number of orders who have not paid yet. If someone's check bounces, those parts will become available. (Check your bank balance, fellas, let's not have any last minute trouble.) If I do not receive payment from the last few stragglers, those devices will become available.
People who have not yet paid have until next Friday (October 5th) to get payment to me. If I haven't seen payment from you by then, your parts will be released to fill other orders. Given that all current individual orders are from here in the US, that should be ample time for the USPS to get a letter here, especially since the last valid individual order is already several days old.
As I understand it, jameshillj's group buy will close tomorrow. At that time he will e-mail me his total. I will do my best to cover as much of his order as I can, but won't make promises I can't keep.
I suppose it goes without saying, but if you have an order in with me but have decided for some reason that you do not want the parts, now is the time to tell me. There are other people who want them.
Grey
To anyone else who might be thinking that they want to increase a pre-existing order, the answer is NO.
At this time jameshillj is the last person to have gotten "in line" and I'm not even sure I'm going to be able to fill his entire order.
I have individual orders in hand that have paid (but whose checks have not cleared yet) and I have a small number of orders who have not paid yet. If someone's check bounces, those parts will become available. (Check your bank balance, fellas, let's not have any last minute trouble.) If I do not receive payment from the last few stragglers, those devices will become available.
People who have not yet paid have until next Friday (October 5th) to get payment to me. If I haven't seen payment from you by then, your parts will be released to fill other orders. Given that all current individual orders are from here in the US, that should be ample time for the USPS to get a letter here, especially since the last valid individual order is already several days old.
As I understand it, jameshillj's group buy will close tomorrow. At that time he will e-mail me his total. I will do my best to cover as much of his order as I can, but won't make promises I can't keep.
I suppose it goes without saying, but if you have an order in with me but have decided for some reason that you do not want the parts, now is the time to tell me. There are other people who want them.
Grey
Oz group buy closed
The group buy for NZ, Aus, SE Asia is now closed, at a total order of 186 devices.
I was hoping for 20 spares but as supply is limited, I doubt that there will be any spares available.
In fact, we may be lucky to receive the full order at all.
We will just have to see how many devices Grey has left.
... James
The group buy for NZ, Aus, SE Asia is now closed, at a total order of 186 devices.
I was hoping for 20 spares but as supply is limited, I doubt that there will be any spares available.
In fact, we may be lucky to receive the full order at all.
We will just have to see how many devices Grey has left.
... James
The last time I calculated, I had 162 devices available. I'm at work and quoting from memory, so don't shoot me if I've mis-remembered.That's subject to change--possibly even upwards, as per above posts.
At this point, I think the thing to do is to sit tight until the checks clear (or not, as the case may be) and see how many are actually available. Again from memory, as of today's mail delivery I believe I have one person who has not gotten payment to me. Don't get excited, it's not a large order, but every JFET counts right now.
Grey
At this point, I think the thing to do is to sit tight until the checks clear (or not, as the case may be) and see how many are actually available. Again from memory, as of today's mail delivery I believe I have one person who has not gotten payment to me. Don't get excited, it's not a large order, but every JFET counts right now.
Grey
I need 10 LU1014 (without hole for fixing of course!!!).
How can I do?
This is not a component this is a chimera.
How can I do?
This is not a component this is a chimera.

Okay, now I'm getting panicky e-mails from the individuals who have ordered wondering if I've got parts for them. Jeez, guys, if I didn't have parts for you, I wouldn't have billed you. Okay? I'm not the kind of guy who bills you, cashes your check, and then leaves town.
Harrumph!
However, just to hammer things in so as not to have to spend all my time answering e-mail, the following individuals are OKAY:
Hiu Chan
Craig Hayenga
Claiborne Ford
John Kennelly
Kuohsing Liao
David Flournoy
Jim Tremain
Mark Wille
If your name is among those above, do not e-mail me. You're okay.
I repeat, Phil's (aka korben69) group order going to France is OKAY. The only problem is James's (aka jameshillj) group buy going Down Under. I have enough devices to cover most, but not all of that buy. If someone poops out then I'll be able to slip a few more devices into James's order.
IF I HAVEN'T BILLED YOU, DON'T SEND MONEY. IF I HAVEN'T BILLED YOU, YOU ARE NOT OFFICIALLY IN LINE. THE LAST PERSON TO OFFICIALLY GET IN LINE WAS jameshillj. ALL OTHER ORDERS ARE ON HOLD.
Guys, I've been at this for the better part of two years. If you didn't order parts earlier, it's not my fault. I've got to get back to writing and building circuits.
Grey
Harrumph!
However, just to hammer things in so as not to have to spend all my time answering e-mail, the following individuals are OKAY:
Hiu Chan
Craig Hayenga
Claiborne Ford
John Kennelly
Kuohsing Liao
David Flournoy
Jim Tremain
Mark Wille
If your name is among those above, do not e-mail me. You're okay.
I repeat, Phil's (aka korben69) group order going to France is OKAY. The only problem is James's (aka jameshillj) group buy going Down Under. I have enough devices to cover most, but not all of that buy. If someone poops out then I'll be able to slip a few more devices into James's order.
IF I HAVEN'T BILLED YOU, DON'T SEND MONEY. IF I HAVEN'T BILLED YOU, YOU ARE NOT OFFICIALLY IN LINE. THE LAST PERSON TO OFFICIALLY GET IN LINE WAS jameshillj. ALL OTHER ORDERS ARE ON HOLD.
Guys, I've been at this for the better part of two years. If you didn't order parts earlier, it's not my fault. I've got to get back to writing and building circuits.
Grey
korben69 said:Yes Jameshillj, you're right, time for me to be involved.
For DIYers in Europe, except France, interested by LU1014D modules :
1° - Group yourselves by country, it will be easier for me to deliver one guy/country. You will organise yourselves inside country for delivery.
2° - Required : Nickname - Full Name - Complete Address - Country - Qty - Private Mail.
3° - There will be delivery delay > 40 days. (maybe less)
4° - I will only charge shipping + financials fees. ( Yes It's DIY !)
5° - GB will be definitively closed on september 21th at 12PM.
6° - Remember : 2 units are required for a F3 or a Zen v9.
7° - After beeing delivered, I'll ask to be paid before shipping.
Remember :
a) Without all the informations shown in 1°, your order will be rejected.
b) I'll only answer to the ones with all informations completed.
I'll post only when LU1014D will be delivered to me.
"Dura Lex Sed Lex".
Korben i have a chance to enter in your BG? it's too late?
I'm sorry but GB is closed now, till 21th september.
Payment has been done and I'm not able to increase the ordered qty.
All the PJFet are affected, none left.
Maybe one pair will be aivalable, but I can't promise it to you...
Payment has been done and I'm not able to increase the ordered qty.
All the PJFet are affected, none left.
Maybe one pair will be aivalable, but I can't promise it to you...

Some news for DIYers from European GB :
meanman1964 - 4u
CeeVee - 20u
Kraljmatjaz - 10u
Peng - 6u
SandMark - 20
I'm transfering the amount to Grey, and it takes some delay.
Banks sometimes create some mistakes...
Be assured to be delivered.
I'll let you know when, and will post on this thread.
meanman1964 - 4u
CeeVee - 20u
Kraljmatjaz - 10u
Peng - 6u
SandMark - 20
I'm transfering the amount to Grey, and it takes some delay.
Banks sometimes create some mistakes...

Be assured to be delivered.
I'll let you know when, and will post on this thread.
LU1014D
Hi GRollins,
I have no possibility to write you an email. I'm interested in some LUD104D. Is where any chance to get them?
cu
konne
Hi GRollins,
I have no possibility to write you an email. I'm interested in some LUD104D. Is where any chance to get them?
cu
konne
LUD104D GB
Looks like the group buy is on hold or something but if it is reopening or still alive put me down for 1o and let me know what I need to do.
Tom Brooke
Looks like the group buy is on hold or something but if it is reopening or still alive put me down for 1o and let me know what I need to do.
Tom Brooke
crypt0wind,
You're welcome.
For ages and ages, people kept asking if I still had JFETs and I kept having to tell them yes...yes...yes...yes...over and over again. I promised numerous times that I would post in this thread when I ran out of parts. Now that I post that I'm basically out (still waiting for one or two individuals' checks to clear, then all remaining stock flies off in search of koalas and kangaroos...and shiraz) and people still ask if I have parts.
Ya just can't win.
So I'll try again:
AT THIS TIME ALL STOCK IS COMMITTED. WITHIN THE NEXT WEEK OR SO, I WILL HAVE A FINAL TALLY OF PARTS GOING TO AUSTRALIA. ONCE THOSE PARTS GO OUT THE DOOR I AM DONE WITH THIS GROUP BUY.
WHETHER I DECIDE TO SPRING FOR ANOTHER ROUND OF PARTS REMAINS TO BE SEEN, BUT IT WON'T BE ANYTIME IN THE NEXT WEEK, MONTH, OR EVEN BY THE END OF THIS YEAR AT THE RATE THINGS ARE GOING. QUITE POSSIBLY NEVER.
You can post here if you want parts, but there is no guarantee that you will ever get them. That will depend on whether I decide to drop several thousand more on fresh tubes of parts. Given that demand has tapered off considerably, it may not be worthwhile.
I know this seems odd to some of you guys/gals, but I have an entire other life as an author that I need to get back to. My editor has probably forgotten that I exist and that's a sad state of affairs.
Grey
You're welcome.
For ages and ages, people kept asking if I still had JFETs and I kept having to tell them yes...yes...yes...yes...over and over again. I promised numerous times that I would post in this thread when I ran out of parts. Now that I post that I'm basically out (still waiting for one or two individuals' checks to clear, then all remaining stock flies off in search of koalas and kangaroos...and shiraz) and people still ask if I have parts.
Ya just can't win.
So I'll try again:
AT THIS TIME ALL STOCK IS COMMITTED. WITHIN THE NEXT WEEK OR SO, I WILL HAVE A FINAL TALLY OF PARTS GOING TO AUSTRALIA. ONCE THOSE PARTS GO OUT THE DOOR I AM DONE WITH THIS GROUP BUY.
WHETHER I DECIDE TO SPRING FOR ANOTHER ROUND OF PARTS REMAINS TO BE SEEN, BUT IT WON'T BE ANYTIME IN THE NEXT WEEK, MONTH, OR EVEN BY THE END OF THIS YEAR AT THE RATE THINGS ARE GOING. QUITE POSSIBLY NEVER.
You can post here if you want parts, but there is no guarantee that you will ever get them. That will depend on whether I decide to drop several thousand more on fresh tubes of parts. Given that demand has tapered off considerably, it may not be worthwhile.
I know this seems odd to some of you guys/gals, but I have an entire other life as an author that I need to get back to. My editor has probably forgotten that I exist and that's a sad state of affairs.
Grey
You have been very patient with your time end energy, certainly well beyond the call of duty. You deserve the members of this Forum's thanks. I'm a scratch build amplifier junkie that is simply late to the party. If you have any stock available at some point I could use between quantity 2 and 8 LU1014D's, depending on availability. My e-mail is wevtt (at) earthlink (dot) net
- Status
- Not open for further replies.
- Home
- Group Buys
- Lovoltech LU1014D power JFET