Have you purchased small matchboxes?got these today to play with
Cies is, supposedly, 59nF
That elevator will go WAY underground, where the super secret subterranean skunk works research facility will be located (don't tell anyone!)...
Pass DIY Addict
Joined 2000
Paid Member
I am interested in the same for my DIY amps. I’ve been looking at Etsy and others. I also need some smaller ones to label the tubes on the top plate of my tube amps. Haven’t found anything I really like yet.
ZM, I thought that I have enough amplifiers but perhaps I need another. I am always intrigued by high power devices. Perhaps I should get a few.
Data sheet:
Data sheet:
I reckon, DN2540 based SF, 50mA, would feed that nasty gate
frankly, can't say what I'm expecting, in comparison with Schaded IXYS puck, but will certainly try it that way, with addition of said SF
it's challenge mostly, not expecting anyone else going that route
frankly, can't say what I'm expecting, in comparison with Schaded IXYS puck, but will certainly try it that way, with addition of said SF
it's challenge mostly, not expecting anyone else going that route
I have been trying to find someone who would make nameplates for Aleksandar's amps that I have in progress. I want to use the Nikola Tesla font that is readily available ( I have it loaded for Mail and Word on my Mac) but like you have had no luck, Will post if I find somebody
find someone locally with 3D printer, then go wild
apply some paint on face, sand, paint stays in "engraved" letters
if guys making Door plaques are scattered
apply some paint on face, sand, paint stays in "engraved" letters
if guys making Door plaques are scattered
You're right, the input capacitance is 10 to 20 times higher than IXYS pucks or Tokins. I was thinking follower like the MoFo but IXYS pucks are also available.
But then I have more than enough amplifiers already. 😊
And NOW I understand why the XA252 will be delayed again, and again, and again 😆got these today to play with
Cies is, supposedly, 59nF
Just updated the first post to include Il Penitente. If I’ve overlooked any others, please let know!
Bob, if find someone online to produce and need files prepped in obscure format, just let me know. Happy to help!
Pass DIY Addict
Joined 2000
Paid Member
And NOW I understand why the XA252 will be delayed again, and again, and again 😆
I'm not going to play with that Bestia pronto
Hope to put SissySIT P on T-Bed soon ..... that talking about work
XA252 is more about logistic (getting some vacation from it)
You are possibly aware of this process, outer edges could be cut straight or laser cut to get a curved profile or one with apertures. Model Engineers use it for etching miniature metal parts such as locomotive pieces etc. It's fairly common globally I would think, and used on various metals. I have not used and have no interest in this particular company, just listing it as an example.
https://www.brunelengraving.co.uk/p...ji2i4WANp2_kkvOvxdh-Jh0UbiW0atcxoCR-cQAvD_BwE
