Sorry guys,forgot to include the link....anyways here it is!
http://www.youtube.com/watch?v=qHBuXG_zF-M
http://www.youtube.com/watch?v=qHBuXG_zF-M
Kolin (T&T) DK-15L or Konzert KTM-15?
Hi guys, I need some opinion/s cause i’m changing my subs driver. currently, im using a 15” crown (instrumental). im planning to replace them but im thinking if which one is best for subs. Kolin (T&T) DK-15L or Konzert KTM-15, both are dual magnet but I think konzert got higher wattage on 8oms. I’ll be using Konzert K6 power amp to drive 2 subs.
Thank you in advance.
Hi guys, I need some opinion/s cause i’m changing my subs driver. currently, im using a 15” crown (instrumental). im planning to replace them but im thinking if which one is best for subs. Kolin (T&T) DK-15L or Konzert KTM-15, both are dual magnet but I think konzert got higher wattage on 8oms. I’ll be using Konzert K6 power amp to drive 2 subs.
Thank you in advance.
hello guys,
Is there anyone using westrak amplifiers,Try it to visit decibez audio sales in ronquillo,I recomend this amp to your T&T or crown 1860s specially in briged mode with 4 ohms load in long time of used.
Is there anyone using westrak amplifiers,Try it to visit decibez audio sales in ronquillo,I recomend this amp to your T&T or crown 1860s specially in briged mode with 4 ohms load in long time of used.
dear sir,
this amp has been around for as long as i can remember. Are you Lando sir?
😀 😀 😀
Best Regards,
audiomachines
this amp has been around for as long as i can remember. Are you Lando sir?



Best Regards,
audiomachines
equalizer
@audiomachines;
gud pm.
Inquire lang sir re: Soundstandard dual 31 band graphic equalizer. OK ba 'to sir any comments.
Thanks
@audiomachines;
gud pm.
Inquire lang sir re: Soundstandard dual 31 band graphic equalizer. OK ba 'to sir any comments.
Thanks
@ alvin_alvin69
Honestly sir I haven't tried soundstandard's eq or any others processors, but their power amplifiers are really good esp. CA 18 and CA 20. In my experience sir if you are familiar with the konzert ,j.bebo, kid rock,ORG etc. "medyo matabang ung kagat ng eq nila" unlike behringer, DOD, dbx, rane etc. Just my two cents.
Best regards,
audiomachines
Honestly sir I haven't tried soundstandard's eq or any others processors, but their power amplifiers are really good esp. CA 18 and CA 20. In my experience sir if you are familiar with the konzert ,j.bebo, kid rock,ORG etc. "medyo matabang ung kagat ng eq nila" unlike behringer, DOD, dbx, rane etc. Just my two cents.
Best regards,
audiomachines
If you want a nice sounding EQ,try to get an ASHLY or KLARK TEKNIK.It would be expensive though.Rane and DBX would also be a nice units with much lower price.
tasso i12 amp
gud day to all,, anybody has used tasso i12 amplifiers? how do they perform? thanks
gud day to all,, anybody has used tasso i12 amplifiers? how do they perform? thanks
KTM-12 driver for MT-122 enclosure (modified)
@ audiomachines
hi, do you think konzert ktm-12 driver will sound good mounted on this kind of enclosure (mid-high)?
http://www.speakerplans.com/index.php?id=mt102
thanks in advance. 🙂
@ audiomachines
hi, do you think konzert ktm-12 driver will sound good mounted on this kind of enclosure (mid-high)?
http://www.speakerplans.com/index.php?id=mt102
thanks in advance. 🙂
@audiomachines:
Sir,
where i can buy clone JBL 2385 horn? do they have it in Raon?
i need 8 of these horn for my JBL 2446, 2447,PEAVEY 44XT & SELENIUM 3500Ti-ND(i have a pair of this bought as experiment not been tested yet with a horn)
Sir,
where i can buy clone JBL 2385 horn? do they have it in Raon?
i need 8 of these horn for my JBL 2446, 2447,PEAVEY 44XT & SELENIUM 3500Ti-ND(i have a pair of this bought as experiment not been tested yet with a horn)
@robotech,
I have a friend who makes fiberglass horns for a living, that's where I get my horns. Send me a pm if you are interested.
Regards,
audiomachines
I have a friend who makes fiberglass horns for a living, that's where I get my horns. Send me a pm if you are interested.
Regards,
audiomachines
@ audiomachines
Sir,
i don't think a fiberglass horn can stand the weight of this driver. it aprox. 14 kg each & the original JBL 2385 HORN is made of metal.
pls. let me know if you know somebody selling JBL 2385 horn made of metal.
thank you!
Sir,
i don't think a fiberglass horn can stand the weight of this driver. it aprox. 14 kg each & the original JBL 2385 HORN is made of metal.
pls. let me know if you know somebody selling JBL 2385 horn made of metal.
thank you!
@robotech
yap I know, we don't let the horn do all the "lifting". We use a piece of plywood where 5 holes were drilled, 4 holes were use to mount the comp driver then the center hole is where you will place the throat of the horn, I hope you get the idea, this is how my EV DH1 drivers were mounted, diecast alum horn tend to crack during frequent transport, while metal/steel horn is gonna mess with the magnetic flux of the compression driver. Just my 2 cents.
regards,
audiomachines
yap I know, we don't let the horn do all the "lifting". We use a piece of plywood where 5 holes were drilled, 4 holes were use to mount the comp driver then the center hole is where you will place the throat of the horn, I hope you get the idea, this is how my EV DH1 drivers were mounted, diecast alum horn tend to crack during frequent transport, while metal/steel horn is gonna mess with the magnetic flux of the compression driver. Just my 2 cents.
regards,
audiomachines
@ lizgar
tol, jbl srx722 is a horn mid-high enclosure. as of now i'm using a bass reflex (not trapizoid), but i wanna try this MT-122 horn type mid-high enclosure.
tol, jbl srx722 is a horn mid-high enclosure. as of now i'm using a bass reflex (not trapizoid), but i wanna try this MT-122 horn type mid-high enclosure.
- Status
- Not open for further replies.
- Home
- Live Sound
- PA Systems
- Konzert Amp & Speakers Website