John Curl's Blowtorch preamplifier

Status
Not open for further replies.
This is my quiet supply circuit for loads requiring low Z:
 

Attachments

  • quiet reg 9.jpg
    quiet reg 9.jpg
    19.1 KB · Views: 420
andy_c said:


I know what you mean! 🙂

But the real question is, "does the Heisenberg Uncertainty Principle apply in a chrono-synclastic infundibulum?"
syn08 said:


It is universal AFAIR ;-)

Joshua, stop, you are killing me :rofl: :rofl: :rofl: Do you have any idea what a gyrator is?

Joshua, you were amusing me but it has got to the point of boredom. Please go somewhere and do some real learning and come back when you have re-read all that you post. You will hopefully learn from that and stop embarrassing yourself.
 
Joshua_G said:
This is my quiet supply circuit for loads requiring low Z:


Joshua_G said:
Concerning my quiet supply circuit for loads requiring low Z posted above, C6 and C7 values are to be defined experimentally with the actual load circuit.

I wouldn't bother to reply, but some sort of civic duty feeling makes me though raise the :bs: flag.

Congratulation, you just designed an AD797 based oscillator. Due to the opamp loading by the feedback network (120ohm), the AD797 will go very hot and it's unlikely it will survive for long.
 
Joshua_G said:
This is my quiet supply circuit for loads requiring low Z:

If this all you can come up with...

BTW Just R2 = 1K alone produces 4 nV/sqrt Hz, and together
with the 100n capacitor, there is a -3 dB corner of 1600 Hz.

Perhaps you should use a pocket calculator and calculate
the very basic facts - instead of applying no-brain mutations
to your dysfunctional circuit and put social pressure upon JC
& the others to correct it.



JC must feel quite uncomfortable. Clap from unqualified friends
can hurt more than a frontal attack.

regards, Gerhard
 
gerhard said:


If this all you can come up with...

BTW Just R2 = 1K alone produces 4 nV/sqrt Hz, and together
with the 100n capacitor, there is a -3 dB corner of 1600 Hz.

Perhaps you should use a pocket calculator and calculate
the very basic facts - instead of applying no-brain mutations
to your dysfunctional circuit and put social pressure upon JC
& the others to correct it.


Thank you very much for your complements, which are highly appreciated.
We will see how the circuit works once I'll build it.
Should it need amendments, it will be amended.

BTW, do you have a better circuit?
 
Status
Not open for further replies.