• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

JFET matching Jig

2Oz copper & dedicated jumper

  • 2oZ copper

    Votes: 15 100.0%

  • Dedicated jumper clip in kit

    Votes: 9 60.0%
  • Total voters
    15
  • Poll closed .
Jump to Latest
#411
chih said:
Hey, Kinku,

What is the part # for the "2-10M1A"?
I couldn't find it in BOM or anywhere else.

Thanks,
chih
Click to expand...

Glad that someone is actually into making something!!😀
So that is just a package designation for original Toshiba dual JFETS.And no such socket is available anywhere that I am aware of.
So what I did was get these two parts (Its in the mouser list linked at the first page)
90147-1104
90147-1103 and solder them at the 4 pin and 3 pin positions and use a drop of superglue between them. Don't forget to hold them together tight while glue is curing, with a clamp.
The dual jfets will slide in without any difficulty.
DON'T FORGET ,if you don't hold them together they may get pushed to the side by glue while curing.
However ,You do not need the socket or dual switch for board to work with non dual jfets.
I will add this description in first page.
 
#413
Hi
All in the US distribution list, my tracking on USPS site shows that all were delivered? But I do not see that many acknowledgements? If you have not received or checked your mail boxes, please post here for me to send you the tracking #. I see few put their name in the waiting list and I want to ship the extra pieces to them, your inputs are required for me to make up my mind on sending those out.
thanks
kannan
 
You must log in or register to reply here.
Top Bottom