• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Ian asynchronous I2S and S/PDIF FIFO KIT group buy

Jump to Latest
#3,181
There is a lot here, I'm trying to understand the various options. I'm planning to get the dual dac and the transformer I/V (which matches my current dac which I love ). I'm planning to get the FiFoPi, although I'm not sure of how much improvement that will make.

I'm toying with buying the LiPo supply, but I tend to leave my DAC on all the time. It sounds like I have to turn it off to make the batteries charge. I am looking for a streamer that stays on all the time, and it's unclear to me that this supply supports that.

So is the FiFoPi worth it? IS the lipo supply a useful thing for 100% on application?

thanks,
Sheldon
 
#3,182
stokessd said:
There is a lot here, I'm trying to understand the various options. I'm planning to get the dual dac and the transformer I/V (which matches my current dac which I love ). I'm planning to get the FiFoPi, although I'm not sure of how much improvement that will make.

I'm toying with buying the LiPo supply, but I tend to leave my DAC on all the time. It sounds like I have to turn it off to make the batteries charge. I am looking for a streamer that stays on all the time, and it's unclear to me that this supply supports that.

So is the FiFoPi worth it? IS the lipo supply a useful thing for 100% on application?

thanks,
Sheldon
Click to expand...

Of course fifopi is very worth buying, it is an epoch-making product. Fifopi completely solved the problem of pi itself, but you have to use a good enough clock, at least cchd-957.
 
#3,184
stokessd said:
There is a lot here, I'm trying to understand the various options. I'm planning to get the dual dac and the transformer I/V (which matches my current dac which I love ). I'm planning to get the FiFoPi, although I'm not sure of how much improvement that will make.

I'm toying with buying the LiPo supply, but I tend to leave my DAC on all the time. It sounds like I have to turn it off to make the batteries charge. I am looking for a streamer that stays on all the time, and it's unclear to me that this supply supports that.

So is the FiFoPi worth it? IS the lipo supply a useful thing for 100% on application?

thanks,
Sheldon
Click to expand...

LiPo supply is a bit more complicated to use. If you are not familiar with DIY, it is not recommended to buy it.
 
#3,186
microzyma said:
Sheldon was building dacs when some members here were in diapers. He's game🙂
Click to expand...

LOL! 🙂 Thanks for the kind words.

I'm not one to toot my own horn, but I built my first DAC in 1993. It was written up in Positive Feedback Magazine (back when it was print). PCM63's feeding a tube output stage with passive I/V. Still sounds reasonable given that it's so old.

It appears that the LiPo supply needs to turn off to charge it, so to use that supply, it requires a bit of hand holding. I'm looking for a set it and forget it sort of experience with this component. It's going to replace my airport express and DAC (Sheldon’s World >> Blog Archive >> Another Audio Digital-to-Analog (DAC) is Born) in my shop. I do most of my listening in the shop while I rebuild Quads.
 
#3,190
The FifoPi has two inputs for powersupplies : one is to feed the isolated side towards the Rpi and the Rpi itself. The second is to feed the isolated side and the embeded clock towards a dac hat and this dac hat as well.
So if your dac hat was powered through the Rpi: there is no problem at all.

You should read the manual : the only thing you have to respect is the spec of the powersupplies : 5v/3A or more for the Rpi side and 5V for the other input of the FiFopi as well. This last should need less current, imo 1A may suffice but again read the manuals to be sure.

regards

Edit: Seems indeed one 2" uf-l cable is provided with the FifoPi... but I'm not sure about it as well.
 
#3,197
GB2019 starts to delivery

Hi guys,

Thank you so much. I'm busy processing GB2019 orders.

Many were shipped yesterday. More shipment will be on Monday. Tracking numbers were updated to your Paypal once packages are shipped.

If you get confirmation email from Paypal, that means I received your payment.So, no worry at all.

Processing your order may take a couple of days. But I'll try may best to make it as fast and safe as possible.

Please send email to me if you have any question. Don't forget including your order number in your email if your have, it will help me finding your files faster.

Good weekend.
Ian
 
#3,199
I/V std board advices please

Manual is talking about opa1612 (soic) oap and also opa1611 (vson package, scared...) for buffer as an improvement.
What are the other soic/dip oaps compatible with the I/V board passive parts please ?

LM49xx family ? Have anyone experience about the best oaps for that i/v task which are compatible with the board layout? In order to avoid oscillations for instance with some too fast one or some not suited for dil 8 adaptator decoupling... Could be very usefull for non experienced members to avoid bad purchases.

Btw, could we use this board (with some diy) with other dac chips having current outputs ?

regards
 
You must log in or register to reply here.
Top Bottom