I got my new lamp. It is for commercial projection use. people use it to replace the

[struchen]

hi ywh, I have a sharp model xv-dw100u, it has a 150 w bulb, how much for 2 burners shipped to USA?

 

[rockila]

Good morning...

Forgive me if this has already been answered, but I need a 170w UHE bulb to replace an ELPLP39 in an Epson 1080UB projector. Which bulb would that be?

THanks,
RIchard

 

[john341]

Hi to all!!!!

I just see this thread and sorry for the question i am still trying to understand what is going on.

I have a Proxima 5610 which needs a replacement lamp what do i do?

 

[ywh]

Hi Narender !
you need 270w JYS/DC, price is $40, shipping is $5, cost of paypal is $3. total is $48.

Hi struchen !
you need 150W UHP, price is $80, shipping is $5, cost of paypal is $4. total is $89

Hi rockila !
my 170w BSM-AC can replase your 170w UHE , price is $80, shipping is $5, cost of paypal is $4. total is $89, but some UHE burners are shorter, how long is you 170w UHE burner? some picture?

Hi john341 !
your is UMRD250NE, that is a great burner, price is $90, shipping is $5, cost of paypal is $4. total is $99,

 

[john341]

Hi ywh, thanks for the reply.
Let me understand this UMRD250NE is the hole lamp?
Cant my burner be replaced by one of yours? Like JYS 250w AC? If yes whould i have better results?

 

[struchen]

ywh, is $80 for one or two burners?

 

[ywh]

Hi john341!
UMRD250NE is the hole lamp, but we replace the burner of hole lamp only, so that is cheaper

Hi struchen !
$80 is for one burners,this is not JYS, it is 150w BSM-AC, same as UHP, jys is 500hours only.

 

[john341]

Hi ywh sory for the questions but i need to know.
The new burner you put in the lamp is the same as the old one ? better, worst?
I am asking you because the original burner has only 1000 h of life and 500 lumens your burner is better than this? can you tell me some specs?

Thank you for the replies.

 

[luxxx]

Nec lt170

Hello YHW,

i have an NEC LT170. NEC Projectors: NEC LT170 DLP projector says, it have an 145W DC NSH Lamp. On the ceramic part of the lamp is printed: NSH160NEF 12JS.

So what a type of lamp would i need for replacement?

BTW: What makes these lamps such expensive? What is it more as a bit of glass, metal & gas?

Lutz

 

[ywh]

Hi john341 !
sorry , I type it wrong, The new burner I put in the lamp is the same as the original one,1000-1500 h of life and 500 lumens

Hi luxxx !
your is NSH 160W, you need my 160w BSM-DC burner. a few manufacturer can do this burner, so expensive

 

[john341]

Hi Ywh

If for new burner we dont put the original one but one of yours like JYS 250w AC will it work? does it have better quality more hours more lumens? or it cant be done.

 

[InternetApe]

I heard this is a good place to get projector bulbs at a great price

I have a Proxima Ultralight LS1. Please le me know how much and how quick i can get one or two.

Thanks,
Kyle

 

[mainmachine]

ywh- I have an Infocus IN-1 with a bad bulb. Any idea which burner will work? The bulb is marked "Philips 132W 1.0 F7"

Thanks!

 

[cromaclear-crt]

Panasonic Lamp ET-LAD7500

Hi YWH
Please can you do this Lamp
ET-LAD7500 300W UHM

Specs:

PROVANTAGE: Panasonic ET-LAD7500 PT-D7500U/PT-D7600U Single Lamp 300W 2000hrs Eco 15000hrs Standard

Thanks

 

[arpii]

Hi Guys!

I have a commercial video projector. A Philips Cbright XG2 Impact - LC4445. This was a 200W UHP lamp, but i needed to change lamp. I found a description to change the lamp to a BLV TOPSPOT. Mod philips cBright XG2 impact [TOPIC] - Philips - Dépannages, réparations, modifications, questions diverses - FORUM Allinbox I did it, but the projector not working. 🙁
When i put the power line into the connector, the fans run up and the ballast try to fire the lamp 2 times. I see the discharge arc, but can not keep.
I try this lamp (BLV TOPSPOT 150W G12) only with the lamp bypass. I think it would be worthwhile to recover the lamp bypass to the factory set.

Any ideas thank!

 

[ywh]

Hi john341 !

the JYS 250w AC will work, but that is a cheaper type.only 500 hours and 60% brightness as UHP.

Hi InternetApe !
your lamp is 120W UHP.I have the burner, price is $80, shipping is $5, cost of paypal is $4. total is $89


Hi mainmachine
your lamp is 130W UHP.I have the burner, price is $80, shipping is $5, cost of paypal is $4. total is $89




Hi mcromaclear-crt

300W UHM is a AC lamp, I have 250w only.it can run in Eco 1500hrs but not standard. price is $80, shipping is $5, cost of paypal is $4. total is $89

 

[Spasticteapot]

I'm a little bit confused as to what's being sold here and for what purpose. I'm thinking of picking up a projector with a bad bulb and converting it - does anyone have a link of projectors suitable for conversion?

 

[cromugnon]

I need to order another lamp

Hi ywh

My lamp has burned, I need a new one, I think it was a 200W BSM-AC, but I'm not sure. Original was an OSRAM P-VIP 200/1.3 cE21.5. The one I bought from you was the one in the photo attached, is that one AC?

price would be $89 with postage & paypal fee, right?

Cheers

 

[ywh]

Hi cromugnon
yes, it was a 200W BSM-AC,price would be $89 with postage & paypal fee,

 

[Spasticteapot]

I need a new ELPLP28 bulb for an Epson PowerLite 200. Any chance you've got one?