I got my new lamp. It is for commercial projection use. people use it to replace the

Status
Not open for further replies.
Jump to Latest
#2,522
Hi,

I changed the bulb with the new one but I dont know why the projector is really overheating. Is it normal that replacing the lamp may cause this?

The projector automatic shutted down after 5 minutes, the lamp is ok.

I will try putting an extra-fan in the lamp cover, I hope this work!
:smash:

anyone with the same experience? what can I do?
 
#2,523
Hi ywh,

I have the Optoma HD65, I need a lamp replacement.

Item No: BL-FS180C SHP 180W Lamp (phonenix SHP112 HG 180W DC LAMP)

I'm in South America, Argentina, Vicente Lopez.

How much will it cost? Lamp or reflector and lamp + Shipping?
Can I send you the reflector so you can mount the bulb for me?
Do you know how much time it takes to get your lamp here in Argentina?

Best regards,

Mariano
 
#2,525
Thank you

franjeman said:

An externally hosted image should be here but it was not working when we last tested it.
Click to expand...


Hello ywh, Already received the new lamp and is mounted and running 100%, thank you very much for your work..... 🙂

For to have enough spare parts I would like to give me the price of a fully assembled, burner & reflector, and separately another burner more.
Total 2 burner and 1 reflector and shipping to Spain.

Thank you..... 😉
 
#2,526
hi everyone, my problem is solved, the problem was that the cooling fan is not working well, it seems that the circuit that controls the speed of the fan is not working, because it sends 10v to the fan and the fan goes really slow. I tested the fan with 12v and it works OK.

For now, I'm using an external DC supply because I couldnt find a 12v line in the projector PSU.

I think that the reason of the blowing of the original lamp was a temperature issue.
 
#2,527
Hi modgod !
pleae give me pics of your lamp kit. let me see how did you done.

Hi paulsown!
you need 270w BSM-DCburner, price is $80, shipping is $5,fee of paypal is $4

Hi zafira1981 !
how about the fans? OK? and the filter?

Hi fosil !
you need 200w BSM-DC burner, price is $80, shipping is $5,fee of paypal is $4
or send the reflector to me, please send email to me

Hi naumoff !
you need 200w BSM-DC burner, price is $80, shipping is $5,fee of paypal is $4

Hi franjeman !
thanks!
the price is same as before, the USD isso cheaper now ;-(

Hi zafira1981 again! good luck
 
#2,529
YWH,

Can I send you the reflector and have you install the bulb? I'm a complete noob at this, but I can probably figure it out.

I definitely want the bulb, just give instructions about where i should send the money and shipping address.

I can't email because I am under moderation, so send me an email and I will respond.

Thanks,
Paul
 
#2,530
ywh said:


Hi fosil !
you need 200w BSM-DC burner, price is $80, shipping is $5,fee of paypal is $4
or send the reflector to me, please send email to me
Click to expand...

I can't email because I am under moderation, so send me an email and I will respond.
Also, if you have msn I want to ask you some questions on different shipping methods (something faster)

Regards
 
#2,537
Hi Darkmeteor!
I have no reflector, please show soe pictures of your reflector, maybe I can look for.

Hi paulsown !
you can send reflector to me . please send a email to me

Hi franjeman !
OK ! the total amount is $ 210,

Hi ulcast !
same as other buyer, total amount is $ 89,

Hi hehe31 !
same as other buyer, total amount is $ 89,

Hi zafira1981 !
they are same if the power is same.

Hi grim767!
I have no this 350W NTP, sorry!
 
Status
Not open for further replies.
Top Bottom