that is awesome I hope to use the same baisc layout, but I have a stupid question what is the lens that you are useing at the end of your light box called?
G'day Nick...
Yup I got an email from Theo from Lumenlabs Australia few days ago he has the FFC and was posting it I should have it in a couple days mate 🙂
Thankyou for your continued interest mate, hopefully the LCD is all A-Ok, if this is the case screen shots of her in action will be less than a week away I would think mate 🙂
Yup I got an email from Theo from Lumenlabs Australia few days ago he has the FFC and was posting it I should have it in a couple days mate 🙂
Thankyou for your continued interest mate, hopefully the LCD is all A-Ok, if this is the case screen shots of her in action will be less than a week away I would think mate 🙂
Definitely not...
I'm looking forward to seeing results. Maybe it'll inspire me to actually get some WORK done on mine. 🙂
I'm looking forward to seeing results. Maybe it'll inspire me to actually get some WORK done on mine. 🙂
I have been waiting to see the results as well 🙂
And have been thinking of doing another design for my projector doing a similar design to yours as it looks nice and small and takes less room and I didnt do mine right in the first place
And have been thinking of doing another design for my projector doing a similar design to yours as it looks nice and small and takes less room and I didnt do mine right in the first place
Hey Guyz
Yup...I got the cable a few days ago but the LCD aint working starts up a few splashes of the blue lilliput screen appear on several parts of the screen then it just goes black ;-( I will pul the lcd out of the projector in a week and take a closer look at it @ the moment i simply dont have the space I'm right in the middle of a full case mod so my main gaming pc is strewn all over my workspace im afraid, soon as thats complete ill get onto the PJ...if the lcd proves to be un-fixable, ill purchase another when funds allow. Keep an eye on slydogs PJ hes building the same projector he should have it up and running shorty looking at his progress thus far..
sorry fellas :-(
Yup...I got the cable a few days ago but the LCD aint working starts up a few splashes of the blue lilliput screen appear on several parts of the screen then it just goes black ;-( I will pul the lcd out of the projector in a week and take a closer look at it @ the moment i simply dont have the space I'm right in the middle of a full case mod so my main gaming pc is strewn all over my workspace im afraid, soon as thats complete ill get onto the PJ...if the lcd proves to be un-fixable, ill purchase another when funds allow. Keep an eye on slydogs PJ hes building the same projector he should have it up and running shorty looking at his progress thus far..
sorry fellas :-(
G'day again folks long time know speak ::wink::
I finally finished up with the new PC upgrades and mods and got some room on my workbench to look into the troublesome Lilliput this past weekend. Unfortuneatly though Im unable to report any good news in the way of getting the darn thing operational :-(
I pulled the LCD and control board out of the PJ for a closer inspection of the FFC etc, all cables appear to be intact. With my extremely limited knowledge of anything electronic that requires more than insertion of a new battery to make it operational im affraid I have one dead Lilliput on my hands.
As all cables are intact as is the rest of the components (physically in apperance anyways) I can only see that the thing maybe of use to someone that is more technically minded than myself/and or in search of some "spare parts" from it. I would be more than happy to post this off to anyone interested in it for the cost of postage to your area...The Lilli as can be seen in my builds on this thread has been stripped and would be sent in a "as is" state, I have the remote and all cables that came with it, I think I may even have the box stored away somewhere also. I shall be keeping the extended FFC cable however as I bought that seperatly and is needed in my Retro design PJ 🙂 sorry hehe
Anyone interested in having the Lilli sent to them drop me an email for further info regarding payment for the postage, first in first served basis, no payment will be asked for the Lilli only for posting the item!
Hopefully somebody may use it for parts or possible get the thing opperational 🙂
I shall start saving my $$$ for a new LCD screen for my PJ hopefully have the funds in a month or so shall report back then people, keep up the great work fellas.
I finally finished up with the new PC upgrades and mods and got some room on my workbench to look into the troublesome Lilliput this past weekend. Unfortuneatly though Im unable to report any good news in the way of getting the darn thing operational :-(
I pulled the LCD and control board out of the PJ for a closer inspection of the FFC etc, all cables appear to be intact. With my extremely limited knowledge of anything electronic that requires more than insertion of a new battery to make it operational im affraid I have one dead Lilliput on my hands.
As all cables are intact as is the rest of the components (physically in apperance anyways) I can only see that the thing maybe of use to someone that is more technically minded than myself/and or in search of some "spare parts" from it. I would be more than happy to post this off to anyone interested in it for the cost of postage to your area...The Lilli as can be seen in my builds on this thread has been stripped and would be sent in a "as is" state, I have the remote and all cables that came with it, I think I may even have the box stored away somewhere also. I shall be keeping the extended FFC cable however as I bought that seperatly and is needed in my Retro design PJ 🙂 sorry hehe
Anyone interested in having the Lilli sent to them drop me an email for further info regarding payment for the postage, first in first served basis, no payment will be asked for the Lilli only for posting the item!
Hopefully somebody may use it for parts or possible get the thing opperational 🙂
I shall start saving my $$$ for a new LCD screen for my PJ hopefully have the funds in a month or so shall report back then people, keep up the great work fellas.
Hiya Hillbilly,
How much would the postage be to me in Canada?
My postal code here is T7X-2B9
Thanks and sorry about the bad luck,
Gordon
How much would the postage be to me in Canada?
My postal code here is T7X-2B9
Thanks and sorry about the bad luck,
Gordon
G'day Gordon
Damn quick to jump on the Lilli mate LoL
I just checked with Australia Post website and for packages upto 750grams in weight to Canada it costs $AU18.50 (i think the Lilli would be under that) I can give them a call later in the morning (2.18am here ATM) and confirm the cost.
Shall let you know when this is confirmed 🙂
Damn quick to jump on the Lilli mate LoL
I just checked with Australia Post website and for packages upto 750grams in weight to Canada it costs $AU18.50 (i think the Lilli would be under that) I can give them a call later in the morning (2.18am here ATM) and confirm the cost.
Shall let you know when this is confirmed 🙂
ok, do you still have the orginal ffc cable as well?
I'll be awaiting your email, it's Monday May 23rd 12:25 PM here.
Gordon
I'll be awaiting your email, it's Monday May 23rd 12:25 PM here.
Gordon
I dont believe I do Gordon I'll have a look for it but im pretty sure i binned it as it was broken (one of the reasons I bought the new one)
If you do a search on the forum there are several references to places that sell them (including Lumenlab) very very cheaply
Shall email you in about 8 hours matey 🙂
If you do a search on the forum there are several references to places that sell them (including Lumenlab) very very cheaply
Shall email you in about 8 hours matey 🙂
My Lilli is broke, too. That's why my project has stalled. I have since remodeled the bedroom (still working on that one though) and have no money. If he doesn't go thru with getting your LCD, I will take it and see what I can come up with from the two. Lemme know thru email. canslers(at)yahoo(dot)com --Take That You email Hackers!
Steamer
Steamer
Think there might be one or too broken Lilli's floating around the place Steamer 🙂
I have emailed corryn with postage cost confirmed with Australia Post (was touch higher $23.50 for Air Mail)
If he wishes to pay for the postages I shall send it to him if not I shall let you know Steamer and I will find a postage cost for you mate 🙂
I have emailed corryn with postage cost confirmed with Australia Post (was touch higher $23.50 for Air Mail)
If he wishes to pay for the postages I shall send it to him if not I shall let you know Steamer and I will find a postage cost for you mate 🙂
I'm gonna pass on it as I just got a schwack of bills in the mail today that need to be paid first.
Gordon
Gordon
No worries mate
Well Steamer tis' all your if you wish to pay the cost for the postage mate 🙂 Let me know where your at and I shall find out how much it is to get it too you.
Well Steamer tis' all your if you wish to pay the cost for the postage mate 🙂 Let me know where your at and I shall find out how much it is to get it too you.
- Status
- Not open for further replies.