H2

[carsten.witt]

Total = 95 ("+" indicates mailing and contact info have been received)

USA (turion64; 32)
----------------
turion64 +
rikiheck +
GnuB +
elwood625 +
manniraj +
hifibluedevil +
nashbap +
dtaylo3 +
hayenc +
hammett +
audiosteve +
exojam +
jwjarch +
vanofmonks +
grimberg +
randyvickery +
04dgmsilv
guiness +
bkhatton +
mksung +
pwagner +
enochRoot +
pfdavid +
wildlabs +
signal lost +
04dgmsilv +
WKCox +
wg45 +
freddi +
docjrev +
olderthandirt +
Paddy Garcia +

EU (carsten.witt; 32)
----------------------
carsten.witt
peppennino
shattered_dream
ernesternest
myleftear
wildcherry (via PM)
iifnotany (via PM)
ABSNimes
sts9
Potepuh
mgb1965
jonboylaw
cubicincher
_jan_
BATE VANKO
sake65 (via PM)
carawu (via PM)
Alex_Twin (via PM)
triode_al (via PM)
Jens_r (via Mail)
waxx (via PM)
HumbleDeer (via PM)
Peppe +
tinke123456
lydlaug
baeijsman
mauro2098
stonegreen
JaTof
Gninnorg
nakamoomin
TryItOne (via PM)

South Africa (Skylar88; 19)
------------------------
Skylar88 +
seanjammy +
nextstep +
naboo123 +
Zilch510 +
DeonC +
Jozua_2019 (via PM) +
twocents +
fredeb +
AndreE (via PM) +
nebula (via PM) +
udwadia +
diode123 +
Ferret +
AlanH +
BDHM +
JLN +
MichaelM25 +
Marantz123 +

Australia (albertNL; 4)
---------------------
albertNL
ZUM911
awc
haiqu

Canada (Kokanee; 6)
---------------------
Kokanee +
PierreQuiRoule +
KenI+
Dennis Hui+
wwwtttwww+
twitchie+

Hong Kong (vivaregina; 2)
------------------------
vivaregina
diykong

 

[sts9]

Total = 96 ("+" indicates mailing and contact info have been received)

USA (turion64; 32)
----------------
turion64 +
rikiheck +
GnuB +
elwood625 +
manniraj +
hifibluedevil +
nashbap +
dtaylo3 +
hayenc +
hammett +
audiosteve +
exojam +
jwjarch +
vanofmonks +
grimberg +
randyvickery +
04dgmsilv
guiness +
bkhatton +
mksung +
pwagner +
enochRoot +
pfdavid +
wildlabs +
signal lost +
04dgmsilv +
WKCox +
wg45 +
freddi +
docjrev +
olderthandirt +
Paddy Garcia +

EU (carsten.witt; 33)
----------------------
carsten.witt
peppennino
shattered_dream
ernesternest
myleftear
wildcherry (via PM)
iifnotany (via PM)
ABSNimes
sts9
Potepuh
mgb1965
jonboylaw
cubicincher
_jan_
BATE VANKO
sake65 (via PM)
carawu (via PM)
Alex_Twin (via PM)
triode_al (via PM)
Jens_r (via Mail)
waxx (via PM)
HumbleDeer (via PM)
Peppe +
tinke123456
lydlaug
baeijsman
mauro2098
stonegreen
JaTof
Gninnorg
nakamoomin
TryItOne (via PM)
seeraz

South Africa (Skylar88; 19)
------------------------
Skylar88 +
seanjammy +
nextstep +
naboo123 +
Zilch510 +
DeonC +
Jozua_2019 (via PM) +
twocents +
fredeb +
AndreE (via PM) +
nebula (via PM) +
udwadia +
diode123 +
Ferret +
AlanH +
BDHM +
JLN +
MichaelM25 +
Marantz123 +

Australia (albertNL; 4)
---------------------
albertNL
ZUM911
awc
haiqu

Canada (Kokanee; 6)
---------------------
Kokanee +
PierreQuiRoule +
KenI+
Dennis Hui+
wwwtttwww+
twitchie+

Hong Kong (vivaregina; 2)
------------------------
vivaregina
diykong

 

[audiosteve]

When will wr be notified of costs and where/how to send funds? That must be getting very close now. I imagine Mr Turion may have possibly received them by now. Thanks!

 

[turion64]

I have received the boards +matched Jfets from Nelson. I'll prepare the shipments to Carsten in the EU and to Canada & S. Africa first and then get to the USA shipments. Should all be out by middle of next week.



Any shipping costs can be re-imbursed to me via my PayPal account. I'll let you know what the costs are as soon as i get there.


Nelson hasn't published the BOM yet and these boards will need less parts compared to the previous versions.



Regards, Pete

 

[mgb1965]

Hi Pete,

Can you share a picture of the boards? 🙂

Thanks, Stephan

 

[turion64]

Only if Nelson says it's OK. I don't want to steal his thunder.
. ;>)



There are no component values labeled on the boards



Pete

 

[audiosteve]

I have received the boards +matched Jfets from Nelson. I'll prepare the shipments to Carsten in the EU and to Canada & S. Africa first and then get to the USA shipments. Should all be out by middle of next week.

Any shipping costs can be re-imbursed to me via my PayPal account. I'll let you know what the costs are as soon as i get there.

Nelson hasn't published the BOM yet and these boards will need less parts compared to the previous versions.

Regards, Pete

Sounds great! Thanks!

 

[rikiheck]

Thanks again, Pete, for handling all this.

 

[Nelson Pass]

Bom on the way

Pic is OK.

Nice weather today.

 

[peppennino]

 

[albertNL]

I have received the boards +matched Jfets from Nelson. I'll prepare the shipments to Carsten in the EU and to Canada & S. Africa first and then get to the USA shipments. Should all be out by middle of next week.

Let me know what you want to do with the 4 Australian orders. I hope you did not forget we would like some down under too 🙂

Given that there are only 4 Australian orders, it may work out cheaper to ship them directly, either from the USA or from Carsten in Germany, rather than shipping them twice. I am sure us 4 from down under are fine either way, as long as we get them haha.
If you can let me know what the weight of the package is (envelope I assume, so cheaper than parcel), I can work out the shipping costs locally in Australia. We can then compare it to the USA and/or German costs and decide what is best.
If they are to be shipped directly from the USA or Germany, I will send the addresses by PM.

Thanks,

Albert

 

[turion64]

Here ya go folks…it measures about 65 x 53mm.

 

[turion64]

Albert: the plastic envelope containing one PCB & two jfets weighs about 15-16 grams (0.53-0.56 oz).

Pete

Let me know what you want to do with the 4 Australian orders. I hope you did not forget we would like some down under too 🙂

Given that there are only 4 Australian orders, it may work out cheaper to ship them directly, either from the USA or from Carsten in Germany, rather than shipping them twice. I am sure us 4 from down under are fine either way, as long as we get them haha.
If you can let me know what the weight of the package is (envelope I assume, so cheaper than parcel), I can work out the shipping costs locally in Australia. We can then compare it to the USA and/or German costs and decide what is best.
If they are to be shipped directly from the USA or Germany, I will send the addresses by PM.

Thanks,

Albert

 

[Skylar88]

Woohoo! Thanks Pete. .
.
.
.
.

 

[audiosteve]

Here ya go folks…it measures about 65 x 53mm.

Cool. Looks like the same topology but with simplifed PS section. This should be very affordable and easy to build. Thanks, Professor Pass!

 

[mgb1965]

Looking nice!! Thanks!

 

[HumbleDeer]

If anyone (preferrably on carsten's list) wants matched resistors for the distortion calculations or otherwise just matched, shoot me a message. We can sort out some deal to post things over 🙂

 

[albertNL]

Albert: the plastic envelope containing one PCB & two jfets weighs about 15-16 grams (0.53-0.56 oz).

Pete

Hi Pete,

Australia Post charges AU$1.10 to AU$2.20, depending on envelope size and thickness.

Unless USPS costs to send 4 individual envelopes to Australia are prohibitive, direct shipment from USA is probably cheapest.

Let me know what you want to do.

Albert

 

[EADFan]

Hi everyone,

Cat believe I missed out but is it too late to put my name in for a purchase of one if these boards? I’m located in the USA . Thanks!

Brandon

 

[rikiheck]

Send a PM, NOW, to turion64 (Pete). Nelson has said, though, that these will also be available through the store.