Is it just me, or is Linear Systems website offline? I've been trying for days, so it seems to be a long term issue.
Craig
Craig
Yeah - it came back late last night (in the UK). No explanation about what took it down on the site. Could have been maintenance, or a crash at the weekend I guess.
Craig
Craig
no answear if they shipped to Puerto Rico or not
I was checking the store and sadly they don't shipped to Puerto Rico I was interested on the chassis 5U when I go to place and order I got this result 🙁
I mean I would like to know the shipping cost for zip code 00678 Quebradillas Puerto Rico
I was checking the store and sadly they don't shipped to Puerto Rico I was interested on the chassis 5U when I go to place and order I got this result 🙁
I mean I would like to know the shipping cost for zip code 00678 Quebradillas Puerto Rico
Attachments
Last edited:
You could try ordering from the company that makes them in Italy; they may ship to Puerto Rico Modushop by Hi-Fi 2000 | Contenitori per Elettronica | Electronic Enclosures | Hi Fi Chassis
Hello Juan,
We DO ship to Puerto Rico! 🙂 Shipping charges have already been loaded on the store but for some reason they are not being taken into consideration when you are about to complete your order, please allow a couple of days to fix this
thank you I appreciated that I hope is not so expensive the shipping cost to Puerto Rico 🙂
Good to see you are on the forum Gianluca. As a repeat customer, and having used your customisation process (machining and lettering) I have always been impressed by the cases and service.
Craig
Craig
Thank you for your kind words Craig, I am glad to know you like our products! 🙂 I am just trying to help out people who may need a hand with them!
Last edited:
IEC part number need it
hi I finally pick up the package in my local FedEx and I'm really amaze of how well padded was the 5U Pesante really nice I have a question about the IEC plug that goes in the back of the chassis what part number work for the IEC hole? for 5U Pesante Order #DAS-12205
here is the picture of the cut out for the IEC plug
hi I finally pick up the package in my local FedEx and I'm really amaze of how well padded was the 5U Pesante really nice I have a question about the IEC plug that goes in the back of the chassis what part number work for the IEC hole? for 5U Pesante Order #DAS-12205
here is the picture of the cut out for the IEC plug
Attachments
![20200327_122102[1].jpg](/community/data/attachments/744/744978-1b151d0bc7e9c18d9cee8b16faec0076.jpg?hash=GxUdC8fpwY)
Why not ask the company?
I'm a great fan of their cases and have built a number of projects into them. There are only two negatives: Every part is painted or anodized, so you have quite a bit of mechanical work to ensure all the case parts make good and safe electrical contact. And the extruded heatsinks are slightly banana shaped. That is always the case with extruded heatsinks, and the only way to ensure good thermal contact is to flatten them. I do that laboriously using a flat surface and coarse 80-grit belt sander paper.
I haven't asked the company about those points, but I'm betting that they would do both on request for a nominal extra sum as post machining operations.
I'm a great fan of their cases and have built a number of projects into them. There are only two negatives: Every part is painted or anodized, so you have quite a bit of mechanical work to ensure all the case parts make good and safe electrical contact. And the extruded heatsinks are slightly banana shaped. That is always the case with extruded heatsinks, and the only way to ensure good thermal contact is to flatten them. I do that laboriously using a flat surface and coarse 80-grit belt sander paper.
I haven't asked the company about those points, but I'm betting that they would do both on request for a nominal extra sum as post machining operations.
Last edited:
I did but not answer from them yet, oh yes good I need to do something about the earth GND the paint is all over really well covered I mean no complain but for the chassis to be safe need to have the GND green wire with the yellow line to metal chassis anyway I'm please the quality is really good 🙂
Hello Juan,
I have sent you an answer yesterday, maybe my email ended up in your spam folder?
Anyway the cutout is 28x20 and there is a distance of 40mm between the two holes on each side of the rectangle 🙂
I have sent you an answer yesterday, maybe my email ended up in your spam folder?
Anyway the cutout is 28x20 and there is a distance of 40mm between the two holes on each side of the rectangle 🙂
hi guys I found the part number for IEC plug but I have a question, I'm planing to use a halo switch with a circuit that I have to turn on the amplifier in a save matter and you guys think that I can make a hole with this knockout puncher? is there a section here on diyaudio.com that is dedicated to chassis build? the knockout puncher is 1 1/8"
Attachments
Last edited:
We will be restocking but it will likely be 3+ months. I just had a look and saw our warehouse is reporting an extra kit and 2 transformers on the shelf but not in Shopify. I've made them available for purchase if you're quick 🙂
Does the "CNC: Totally customized ..." option at CNC work on 10mm aluminum panels – diyAudio Store include engraving capabilities, or is it only for CNC cutting and mlling? It's a bit ambiguous with the words "CNC work" and "totally customized" on the page.