I previously asked for one board but I now need two.
Please add me for 1 * UltraBIB pcb, 2 * Positive and 1 * Negative mini kits.
And by that I mean two positive boards.
Are the leds specific only if I want 5V?
Each requested "Board" is really 2+ and 1- breakoff board as needed.
Please review the original post.
https://www.diyaudio.com/forums/group-buys/322596-gb-salas-sslv1-3-ultra-bib.html#post5432184
The LED need to be specific for 5v. Some reds are acceptable, almost all green and yellow ones are not.
Hi Tea, will you open a new thread for L-Adapter and kits details?
Today or tomorrow I plan on it. They are listed in spreadsheet for now.
For 2 UBIB boards should I order 4 positive and 2 negative UB kits?
to fully populate .. yes
If I understand your question correct you need two positive regulators, that is one 1.3 UltraBiB pcb.
Chose R1 and buy components according to BOM or ask Tea for help with a KIT.
One UB 1.3 pcb consists of TWO pos and ONE neg, dividable by just breaking the board on the prepared lines.
I must admit I am a bit confused on what exactly it is that I need. I want to build two B1 triode preamps. Here is the schematic:
What are the +F and +R voltages and current?
One UB 1.3 pcb consists of TWO pos and ONE neg, dividable by just breaking the board on the prepared lines.
I know.
He said that he want to build two B1 triode preamps.
So yes, two positive boards.
At this BOM it means he need to buy one 1.3 UltraBiB board to do that.
- Home
- Group Buys
- GB For Salas SSLV1.3 Ultra-BIB