I would to order two sets of the kit for 26 dht amp. Let me know when next round starts.
Regards
Regards
I would to order two sets of the kit for 26 dht amp. Let me know when next round starts.
Regards
Hi, there are still a number of these and kits available.
I will send a PM.
GB for Salas SSHV2 Regulator
Hi Tea bag
Can I still order 2x Salas SSHV2 PCB's if still available?
Best regards
Jacques
Hi Tea bag
Can I still order 2x Salas SSHV2 PCB's if still available?
Best regards
Jacques
Hi Tea bag
Can I still order 2x Salas SSHV2 PCB's if still available?
Best regards
Jacques
Yes. I will send a pm.
I still have a number of board and kits left if anyone is currently interested. PM me for details.
Tea
Tea
you have two kits?
I have several full kits or minikits, and boards.
Please private message me what you would like and I can send you more details.
Regards,
Mike Thomas
Extreme GTAC
Hi, I'm looking for a complete component kit (except board, which I've got) for Salas DCB-1 Buffer with Shunt Reg. Is it still possible to get these? Thanks
Hi, I'm looking for a complete component kit (except board, which I've got) for Salas DCB-1 Buffer with Shunt Reg. Is it still possible to get these? Thanks
Wrong thread,
But the DCB1 full kits should be available in 3 weeks. I have most parts ready and packed, just waiting on some fets.
Hi Teabag,
Do you still have SSHV2 board? I want to buy 4 boards.
BTW, also want to buy 2SK117. Need 10.
Thanks
Do you still have SSHV2 board? I want to buy 4 boards.
BTW, also want to buy 2SK117. Need 10.
Thanks
There will be more voltage drift with K170 but it can replace it. At least until you get a genuine K117GR. Use K170GR or the lowest IDSS K170BL you have.Hi,
I recently burnt the JFET K117. can I use 2sk170 to replace it?
Gary
The GB for the Salas board is open for payment up until 11:59PM EST 1/24/2016.
Payment is via PayPal invoice only. You will need to send me your paypal email via private message for me to start this process. Then I will invoice the parts you requested from the spreadsheet. If you reply to this email - cut out some of the existing text, otherwise the message is too big.😉
Customs forms
DO NOT ask for me to fudge up a customs form with really low amount. These are based on areasonable wholesale price.
Shipping
In general boards are a set costs, and mini kits are built into the shipping costs and larger full kits are 10.00-12 to ship. Starting price for shipping is 8.00 for just a small board and can rise from there.
The boards will ship around 2-3 weeks after the GB closes typically. The boards need to be ordered, I don't have them on hand.
SSHV2 - High Voltage Shunt Regulator

Here is a link to the first post of GB Thread which includes the Construction Guide. It also mentions the parts used in the minikits.
http://www.diyaudio.com/forums/group-buys/206033-gb-salas-sshv2-regulator.html#post2892748
The SSHV2 boards are 15.00 each.
The Resistor Minikits are 8.00 each
The transistor kits are 10.00 each
Full kit to populate board only is 40.00
All mini kit parts are listed in the mini kit BOM section listed at bottom of message
Build up unit pic.
MiniKit BOM section. This links goes to full details of all the parts included in the kits and there respective positions on the board.
http://www.diyaudio.com/forums/blogs/tea-bag/741-salas-board-minikits-full-kits.html
Payment is via PayPal invoice only. You will need to send me your paypal email via private message for me to start this process. Then I will invoice the parts you requested from the spreadsheet. If you reply to this email - cut out some of the existing text, otherwise the message is too big.😉
Customs forms
DO NOT ask for me to fudge up a customs form with really low amount. These are based on areasonable wholesale price.
Shipping
In general boards are a set costs, and mini kits are built into the shipping costs and larger full kits are 10.00-12 to ship. Starting price for shipping is 8.00 for just a small board and can rise from there.
The boards will ship around 2-3 weeks after the GB closes typically. The boards need to be ordered, I don't have them on hand.
SSHV2 - High Voltage Shunt Regulator

Here is a link to the first post of GB Thread which includes the Construction Guide. It also mentions the parts used in the minikits.
http://www.diyaudio.com/forums/group-buys/206033-gb-salas-sshv2-regulator.html#post2892748
The SSHV2 boards are 15.00 each.
The Resistor Minikits are 8.00 each
The transistor kits are 10.00 each
Full kit to populate board only is 40.00
All mini kit parts are listed in the mini kit BOM section listed at bottom of message
Build up unit pic.

MiniKit BOM section. This links goes to full details of all the parts included in the kits and there respective positions on the board.
http://www.diyaudio.com/forums/blogs/tea-bag/741-salas-board-minikits-full-kits.html
Last Day for Group Buy, Please pay invoices before midnight EST.
There is still time to join, private message Me for details.
There is still time to join, private message Me for details.
GB on SSHV2
I have made the changes to the Spreadsheet regarding 2 boards, 2 each or the other kits. Please let me know how I can use PayPal for these items. This is my very first entry to DIYAUDIO so I'm a ROOKIE. Thanks!
Didn't realize this was happening. If you have two more kits available, I would like to buy them.
Didn't realize this was happening. If you have two more kits available, I would like to buy them.
Sure, I have some extra to sell.
Please read post 654# and private message me what your looking for.
- Home
- Group Buys
- GB for Salas SSHV2 regulator