Thanks Salas! Now if Teabag can tell me what I need to look for to know which end to orient towards the diode.
Russellc
Russellc
Yes, there is a stripe on the Omrons.... I'll attempt a phone pic, no acess to camera.
Russellc
Does the line on one end mean the same as the panasonic devices, that it goes next to the diodes, or must that be ferreted out from the data sheet?
Russellc
Russellc
I would just put them on towards the diodes. It will work.
The symbols on the PCB are not as intuitive as they could be. Having done it a few times, that's the way it goes...
The symbols on the PCB are not as intuitive as they could be. Having done it a few times, that's the way it goes...
measure the coil resistance.
Confirm which two pair are the normally closed contacts (nc).
you should find 4 pins that appear to be open circuit.
Two are the no contatcts and two are not connected.
Confirm which two pair are the normally closed contacts (nc).
you should find 4 pins that appear to be open circuit.
Two are the no contatcts and two are not connected.
Okay,
So once again I am out of boards.
Salas and I are opening up a want list for the boards. As there has already been many request to buy the DCB1's.
We will include both The Blue Mesmerize and Blue "Hot-Rod" hypotize boards.
The target price will be $15 each, if enough quantity can be ordered.
Additionally, we have decided, as we did in the beginning, to donate $1 per board to Diyaudio.com to keep us in proper working order. This would not be possible without them.
I am hoping to work with other providers to integrate matched devices and other small to-92 devices into a kit I can ship as one package. Lets discuss this.
I will try to write an updated and integrated blog about the effort hopefully over the holidays.
So once again I am out of boards.
Salas and I are opening up a want list for the boards. As there has already been many request to buy the DCB1's.
We will include both The Blue Mesmerize and Blue "Hot-Rod" hypotize boards.
The target price will be $15 each, if enough quantity can be ordered.
Additionally, we have decided, as we did in the beginning, to donate $1 per board to Diyaudio.com to keep us in proper working order. This would not be possible without them.
I am hoping to work with other providers to integrate matched devices and other small to-92 devices into a kit I can ship as one package. Lets discuss this.
I will try to write an updated and integrated blog about the effort hopefully over the holidays.
have you thought to update layout - separate bridges and also with hot roded to include CRC filtering not only CC
There will be no redesign or prototyping. This time the Blue Hypno HR will have a shorting to ground output relay mod too, as the Blue Mez of previous and now GB also has, that's the only plus. Given the steadily positive feedback for results in very difficult comparisons by enough members posted in various threads, I don't think that those mature designs are to be tweaked. You can always arrange the rectification/filtering externally if you will feel like experimenting.
I built a Nelson Pass B1 several months ago and I liked it very much. I have a hypnotize board and I was planning to start collecting the components to build it, but I think I will wait for the hot rod version. I just signed up for 1 board.
Building is fun - I don't particularly enjoy ordering the components part especially since you cannot order them from a single supplier.
Building is fun - I don't particularly enjoy ordering the components part especially since you cannot order them from a single supplier.
Salas have you find that the transformer buzzing when working with single bridge and curents above 100 mA
do you plan to sell Blue Hypno
Last edited:
No buzzing that I have experienced, nor any mentioning from the hundreds of reported builds that I can remember of. There are both Blue Hypnotize Hot Rod and Blue Mezmerize columns in Tea Bag's signature dynamic document. We got several PMs about offering those again, that is why Tea reminded me and we decided to see if there are really enough requests for signing up to do some boards again.
I am pretty sure that the reason to buzz Is loaded transformer with not equal curents going to rails
What kind of difference in mA you got between your rails, and what kind and brand of transformer?