• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS A ton of random (nice quality) drivers for DIY

Still have 6 of these 10" drivers left. As seen here:
http://www.diyaudio.com/forums/swap...m-nice-quality-drivers-diy-4.html#post4352459



Also adding the following classic AR tweeters:

I don't know exactly which models these go to, but here ya go!

$20 each, shipped.

1-2151050 - 3/4" cloth dome tweeter. DCR=4.0 ohm. Round magnet. One of the leads is shorter than the other. Tested.

1-2051050 - 3/4" cloth dome tweeter. DCR=3.2 ohm. Square magnet. Tested.

1-215130-0A - 3/4" cloth dome tweeter. DCR=3.9 ohm. Large round magnet. Tested. Dome has a crease in it, but the coil lines up properly. Once mounted on a face plate, it will be fine.

1-215130-0A - Same as above, but without the cosmetic issues.


Pictures:

1-2151050
17929138105_765894c17a_b.jpg


1-2051050
17936977861_811a42d7f0_b.jpg


1-215130-0A w cosmetic issue
17748464268_dab72b7483_b.jpg


1-215130-0A
17315818683_c4f63585f5_b.jpg