An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Infrared photographic images, do not think that the power tube overload ah!
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Installed machine for a day, today adjust the test. Machine feedback about -4db. This is 1khz square wave signal. Frequency and the output voltage on the image is visible.
An externally hosted image should be here but it was not working when we last tested it.
0dbv output, the machine harmonic distortion of about 0.1% of the second harmonic, third harmonic of 0.03%.
An externally hosted image should be here but it was not working when we last tested it.
When output 10w like? As shown, the output voltage has been effective 8.9v, VPP has a 25v.
Although output 10w time oscilloscope waveform distortion still can not see, can harmonic analysis results have even harmonics -32db, and 2 percent of even-order harmonic distortion, -37db odd harmonics. 1%.
