An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Infrared photographic images, do not think that the power tube overload ah!
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
0dbv output, the machine harmonic distortion of about 0.1% of the second harmonic, third harmonic of 0.03%.
An externally hosted image should be here but it was not working when we last tested it.
When output 10w like? As shown, the output voltage has been effective 8.9v, VPP has a 25v.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- EF80 push EL153, DIY with a picture tells a story.