If I press MANY times in the left corner of the txt I get a square so that I kan edit the text
but it´s kind of hard to hit that spot....
but it´s kind of hard to hit that spot....
I think there should be a small 'target' cross somewhere in the text field that is the attach point for the cursor.
Generally, all objects, be it a text block, a part footprint or whatever, have an 'attach point', normally a cross, which attaches to the cursor if you click on it so the system understands what object you want to manipulate.
Jan
Generally, all objects, be it a text block, a part footprint or whatever, have an 'attach point', normally a cross, which attaches to the cursor if you click on it so the system understands what object you want to manipulate.
Jan
It must be a matter of package selection. Mouser has about 26 different versions of the IRF140.
Jan
Jan
Ok.when you wrote that I remembered where I stored the link,Thanks.
I´ll post the link:
https://www.mouser.se/ProductDetail...9lA8ZYktSCD1k6iJXBnizRzeD3aux469PZgfPijzIkQ==
I´ll post the link:
https://www.mouser.se/ProductDetail...9lA8ZYktSCD1k6iJXBnizRzeD3aux469PZgfPijzIkQ==
Caterpilar:Can you make both for throughthole and smd?
Edit. Thrughole I allready have
Edit: The throughhole doesnt seem to work either..
Last edited:
I´m having a harware meltdown in thinking.
When I messaure the current through the resistor(s).
Do I messaure ONLY over the R2 resistor OR do I messaure over the resistot AND the trimpot? 😕
