Do not use any email you had before.
Because password recovery.
The guy that stole your account to receive messages can use the old password, he stole, to recover the new one you are entering.
Cannot register in a place you where before.... search for a new one..never used before.
Do not communicate with me using Yahoo or Gmail (Outlook)...the guy is reading Juan.
regards,
Carlos
Because password recovery.
The guy that stole your account to receive messages can use the old password, he stole, to recover the new one you are entering.
Cannot register in a place you where before.... search for a new one..never used before.
Do not communicate with me using Yahoo or Gmail (Outlook)...the guy is reading Juan.
regards,
Carlos
I am really sorry to hear about this-
Juan then you did'nt get my email? the one sent to gmail on 26/09 was delivery failure, but i got an answer from your yahoo account same day (other email sent by me) saying "After I come back from post office I let you know I'm really busy with the orders but don't you worried I will take care of you 🙂 " was it you?
maybe it's safer to speak through the forum...
Juan then you did'nt get my email? the one sent to gmail on 26/09 was delivery failure, but i got an answer from your yahoo account same day (other email sent by me) saying "After I come back from post office I let you know I'm really busy with the orders but don't you worried I will take care of you 🙂 " was it you?
maybe it's safer to speak through the forum...
Last edited:
He have changed his email adress
But the message you have mentioned looks to be real because i know the way Juan write.
His way to write...looks to be his message....you see....i have my own way to replace comma....these dots... sometimes two, sometimes three.... sometimes four.
He is now JuanVargasDiaz@aol.com
Now he may be replacing his email adress in several foruns, in our diyaudio and also in Pay Pal
regards,
Carlos
But the message you have mentioned looks to be real because i know the way Juan write.
His way to write...looks to be his message....you see....i have my own way to replace comma....these dots... sometimes two, sometimes three.... sometimes four.
He is now JuanVargasDiaz@aol.com
Now he may be replacing his email adress in several foruns, in our diyaudio and also in Pay Pal
regards,
Carlos
Oh well any way I was messing around with Google Sketch and I have this images I hope you guys like them 🙂 the last image is where I got the idea
Regards
Juan
Regards
Juan
Attachments
Last edited:
I'm happy you got your boards really fast mister Don May very good 😀 remember take your time at putting together the boards there is not rush, here how my boards look like, I need to get me R14 5K6 and some other more parts
here is a list I was doing for the parts I need : the part number ending in -ND are from Digi Key 🙂
actually this is my personal list of parts I have to be specific guys this are parts I need for Dx Super A and Dx Regulator
One tip guys one more sorry, please do not use too much solder, begging with some resistors save the leads from the resistors and use them as jumpers, after solder pads check with a magnifier make sure they are no small tiny particles of solder, clean with a old tooth brush after all is solder clean the board with kerosene and check one more time with the magnifier all joins to see if all have a wet finish of solder they should be shiny and not dull. be patience is really important 😉.
S5.6KCACT-ND 5.6k metal film 1/4W
338-1052-ND mica 150pF 500v 5.90 mm pitch
495-2470-1-ND 1uF
P13515-ND CAP ALUM 47UF 160V 20% RADIAL
47ZCT-ND RES 47 OHM 2W 5% METAL FILM AX
568-5796-1-ND DIODE ZENER 10V 400MW ALF2 QTY10
F4543-ND fuse holders QTY2
338-1046-ND 220pF 500V 0.232" (5.90mm) pitch
RSF2JT47R0CT-ND RES MO 2W 47 OHM 5% AXIAL
495-4403-1-ND CAP FILM 0.068UF 100VDC RADIAL
P11260-ND CAP ALUM 470UF 50V 20% RADIAL QTY 4
P10325-ND CAP ALUM 220UF 50V 20% RADIAL6
P1283-ND CAP ALUM 47UF 50V 20% RADIAL
F4545-ND FUSEBLOCK COVER FOR 646/647 CLR QTY 4
565-2695-ND CAP ALUM 6800UF 63V 20% SNAP
WV-T264-101E-ND HEATSINK W/CLIP FOR TO-264 silver 1.96
GBJ3502-BPMS-ND BRIDGE RECTIFIER 35A 200V GBJ 1
T93YA-10K-ND TRIMMER 10K OHM 0.5W TH 2
C5SMF-RJS-CT0W0BB2CT-ND LED 5MM OVAL RED 621NM
C4SMF-GJS-CV0Y0792CT-ND LED 4MM OVAL GREEN 527NM
568-1363-1-ND DIODE ZENER 12V 1W DO41
Regards
Juan
here is a list I was doing for the parts I need : the part number ending in -ND are from Digi Key 🙂
actually this is my personal list of parts I have to be specific guys this are parts I need for Dx Super A and Dx Regulator
One tip guys one more sorry, please do not use too much solder, begging with some resistors save the leads from the resistors and use them as jumpers, after solder pads check with a magnifier make sure they are no small tiny particles of solder, clean with a old tooth brush after all is solder clean the board with kerosene and check one more time with the magnifier all joins to see if all have a wet finish of solder they should be shiny and not dull. be patience is really important 😉.
S5.6KCACT-ND 5.6k metal film 1/4W
338-1052-ND mica 150pF 500v 5.90 mm pitch
495-2470-1-ND 1uF
P13515-ND CAP ALUM 47UF 160V 20% RADIAL
47ZCT-ND RES 47 OHM 2W 5% METAL FILM AX
568-5796-1-ND DIODE ZENER 10V 400MW ALF2 QTY10
F4543-ND fuse holders QTY2
338-1046-ND 220pF 500V 0.232" (5.90mm) pitch
RSF2JT47R0CT-ND RES MO 2W 47 OHM 5% AXIAL
495-4403-1-ND CAP FILM 0.068UF 100VDC RADIAL
P11260-ND CAP ALUM 470UF 50V 20% RADIAL QTY 4
P10325-ND CAP ALUM 220UF 50V 20% RADIAL6
P1283-ND CAP ALUM 47UF 50V 20% RADIAL
F4545-ND FUSEBLOCK COVER FOR 646/647 CLR QTY 4
565-2695-ND CAP ALUM 6800UF 63V 20% SNAP
WV-T264-101E-ND HEATSINK W/CLIP FOR TO-264 silver 1.96
GBJ3502-BPMS-ND BRIDGE RECTIFIER 35A 200V GBJ 1
T93YA-10K-ND TRIMMER 10K OHM 0.5W TH 2
C5SMF-RJS-CT0W0BB2CT-ND LED 5MM OVAL RED 621NM
C4SMF-GJS-CV0Y0792CT-ND LED 4MM OVAL GREEN 527NM
568-1363-1-ND DIODE ZENER 12V 1W DO41
Regards
Juan
Attachments
Last edited:
Hi Sir Juan,
The nice 😀 PCBs did arrive in my home, all was there : 2 kit + 2 DX Regulators.
The boards look better than what is shown in the thread ! Thank you !
I have had no problem with the delivery : they were very well packed, and did arrive in perfect conditions 😀.
Thank you 🙂 Sir Juan it is a very nice work !
Now, after some preparation to the work
, I will populate the boards, but it will be after I finish the power amp that I am building for a friend (a SymAsym TO3).
Best regards
rephil
The nice 😀 PCBs did arrive in my home, all was there : 2 kit + 2 DX Regulators.
The boards look better than what is shown in the thread ! Thank you !
I have had no problem with the delivery : they were very well packed, and did arrive in perfect conditions 😀.
Thank you 🙂 Sir Juan it is a very nice work !
Now, after some preparation to the work
, I will populate the boards, but it will be after I finish the power amp that I am building for a friend (a SymAsym TO3).Best regards
rephil
Hi Sir Juan,
The nice 😀 PCBs did arrive in my home, all was there : 2 kit + 2 DX Regulators.
The boards look better than what is shown in the thread ! Thank you !
I have had no problem with the delivery : they were very well packed, and did arrive in perfect conditions 😀.
Thank you 🙂 Sir Juan it is a very nice work !
Now, after some preparation to the work
Best regards
rephil
Thank you sir that make me feel really happy I'm glad all get shipped at your home 😀 I always package them with love this is fantastic you make my day have a good day sir 🙂.
Regards
Juan
Thank you Brussels (C37)
I am happy you are joining the Dx Corporation...everyone that assemble a Dx Amplifier becomes a Dx Corporation man.
Pictures of your stuff, family, cat dogs, amplifiers, yourself...are all very welcome.
The stuff over my head is a tool for massage...the effect to this stuff is very nice...shivers goes down the spine ...a 2 dollar toy we can buy in Olinda..... tool place and town is Olinda..universal historical heritage town.
Oh Linda is the pronunciation.... or O linda....means Oh beautifull.... or Oh Gorgeous.
Girls are my daugther and i have a son too.... i am fat and big 6 feet 5 inches
regards,
Carlos
I am happy you are joining the Dx Corporation...everyone that assemble a Dx Amplifier becomes a Dx Corporation man.
Pictures of your stuff, family, cat dogs, amplifiers, yourself...are all very welcome.
The stuff over my head is a tool for massage...the effect to this stuff is very nice...shivers goes down the spine ...a 2 dollar toy we can buy in Olinda..... tool place and town is Olinda..universal historical heritage town.
Oh Linda is the pronunciation.... or O linda....means Oh beautifull.... or Oh Gorgeous.
Girls are my daugther and i have a son too.... i am fat and big 6 feet 5 inches
regards,
Carlos
Attachments
Last edited:
Bom dia Carlos,
Ahhhh, you know It was a long time i wanted to say to you that if there was ever a contest for the friendliest and most cheerful fellow on DIYaudio my vote would go for you 🙂 Maybe that's because i also have a soft spot for Brasilians, was there for a month back in 2003 (10 years already!!) in Salvador de Bahia for a project with children of the Favelas. I miss Brasil ever since...
Olinda...is that near Recife, right? How nice...
Carlos, remember a looong time ago you asked for schematics of a british amplifier, Cymbol? After reading your post i found one, bought it for my brother but he does'nt use it anymore ( he has big old JM labs speakers, 2x 20 cm in bass and surely very tortured impedance- probably too much for this amp- very nice mids and highs tough) - I use active speakers, Tannoys- so now i have this amplifier back, i would like to keep and use the case but i could send you the pcb- only thing is how to send such a HUGE pcb without braking to Brasil? Maybe you have a good friend here in Belgium, that can trace and make a schematic unlike me? Maybe Meanman? Would you be interested?
Best,
Thomas
Ahhhh, you know It was a long time i wanted to say to you that if there was ever a contest for the friendliest and most cheerful fellow on DIYaudio my vote would go for you 🙂 Maybe that's because i also have a soft spot for Brasilians, was there for a month back in 2003 (10 years already!!) in Salvador de Bahia for a project with children of the Favelas. I miss Brasil ever since...
Olinda...is that near Recife, right? How nice...
Carlos, remember a looong time ago you asked for schematics of a british amplifier, Cymbol? After reading your post i found one, bought it for my brother but he does'nt use it anymore ( he has big old JM labs speakers, 2x 20 cm in bass and surely very tortured impedance- probably too much for this amp- very nice mids and highs tough) - I use active speakers, Tannoys- so now i have this amplifier back, i would like to keep and use the case but i could send you the pcb- only thing is how to send such a HUGE pcb without braking to Brasil? Maybe you have a good friend here in Belgium, that can trace and make a schematic unlike me? Maybe Meanman? Would you be interested?
Best,
Thomas
Once in Brasil you will never forget
People here is really warm and friendly.
I am glad you like my place...despite each spot is different, as you know Brasil is really big.
Olinda is 25 Km from Recife... over a mountain...where the whole place was founded..where everything started here.... here we had Dutch invaders, a Princip came to this place...sadly Portuguese have attacked them and they return to Holland..but they left many sons.... also buildings, bridges, and paints..... their genetic is here also.... green and blue eyes...blond tall women..we have a lot here.
I thank you very much but i do think it is too much risky and expensive for you to ship these pcboards... do not worry about that...i do have schematic and this is under control....was curiosity....i am deeply curious...since young dismounting things to watch what has inside.
People use to return to Europe with one of our women...we have in excess....born 30 percent more women in this place...they are light brown and dark brown and usually Europeans become crazy for these women....also old style women..the ones wants to be at home, taking care of babies and husband..... the man here is a king.... there are equal rights, but some of them want to be old style.
Thank you, very kind from you.... save your money and pcboards my dear...was already great to my heart to know you had this intention...this is enougth to me...the good intention.
regards,
Carlos
People here is really warm and friendly.
I am glad you like my place...despite each spot is different, as you know Brasil is really big.
Olinda is 25 Km from Recife... over a mountain...where the whole place was founded..where everything started here.... here we had Dutch invaders, a Princip came to this place...sadly Portuguese have attacked them and they return to Holland..but they left many sons.... also buildings, bridges, and paints..... their genetic is here also.... green and blue eyes...blond tall women..we have a lot here.
I thank you very much but i do think it is too much risky and expensive for you to ship these pcboards... do not worry about that...i do have schematic and this is under control....was curiosity....i am deeply curious...since young dismounting things to watch what has inside.
People use to return to Europe with one of our women...we have in excess....born 30 percent more women in this place...they are light brown and dark brown and usually Europeans become crazy for these women....also old style women..the ones wants to be at home, taking care of babies and husband..... the man here is a king.... there are equal rights, but some of them want to be old style.
Thank you, very kind from you.... save your money and pcboards my dear...was already great to my heart to know you had this intention...this is enougth to me...the good intention.
regards,
Carlos
Attachments
Last edited:
What a beautiful city! I will have to come and visit Brasil sometime. Here in Australia we have clear blue skies like you see in Carlos' photos, but the water on the East Coast where I live in Brisbane is a different colour. The colour reminds me of a trip to Albany on the West Coast, south of Perth, where the Indian Ocean looks a little like in that photo.
I am not sure, but these different colours
May be a result of different species of algae in water.
Water temperature in my place is around 25 degrées celsius.....yes...very nice...and this is kept this way all over the year...we like...... sadly sharks likes too.🙁
regards,
Carlos
May be a result of different species of algae in water.
Water temperature in my place is around 25 degrées celsius.....yes...very nice...and this is kept this way all over the year...we like...... sadly sharks likes too.🙁
regards,
Carlos
Attachments
Last edited:
Absolutely gorgeous, both water and architecture.
Here are a couple of pics for you Carlos of my family on holiday a few months ago. About 1000km north of Brisbane. A more tropical climate than Brisbane but still not at the same lattitude as Recife.
Simon
Attachments
Nice place...nice people
You know i love Australia...it is something alike a second home to me..the place i would like to go to make a living.
Believe me or not..the desert fascinates me..also the natural people, the native people..and the sound instrument too... the one sounds alike a cracked bamboo.
Here you can listen the sound:
http://youtu.be/vLVNtGh1nLM
regards,
Carlos
You know i love Australia...it is something alike a second home to me..the place i would like to go to make a living.
Believe me or not..the desert fascinates me..also the natural people, the native people..and the sound instrument too... the one sounds alike a cracked bamboo.
Here you can listen the sound:
http://youtu.be/vLVNtGh1nLM
regards,
Carlos
Last edited:
Good afternoon (UK) Juan and everybody happy to report my PCB's have arrived and im now soldering in some parts and ordering the parts I dont yet have.
Thanks guys the boards look great does anyone know if there are any DX Blame MkIII still avaiable to buy as I would like to build these amps next.
Ian
Thanks guys the boards look great does anyone know if there are any DX Blame MkIII still avaiable to buy as I would like to build these amps next.
Ian
Thanks to let me know this is fantastic! 🙂 I'm glad you like the boards very good dear friend,
I'm not sure about Dx Blame MKIII probably they are more boards check on this link: http://www.diyaudio.com/forums/group-buys/239084-blame-mkiii-hx-14.html
ask mister meanman1964 I got board from him the first time.
have a great day Earthquake 🙂
Regards
Juan
I'm not sure about Dx Blame MKIII probably they are more boards check on this link: http://www.diyaudio.com/forums/group-buys/239084-blame-mkiii-hx-14.html
ask mister meanman1964 I got board from him the first time.
have a great day Earthquake 🙂
Regards
Juan
Last edited:
- Status
- Not open for further replies.