Drive NOS AD1865/62,PCM1704/02/63,TDA1541 from FIFO: Universal I2S-PCM driver board

Jump to Latest
#81
Wish list

TV Man
merlin el mago
rtd
jameshillj
erin
Nikola Krivorov x 3
Rupor54
vitalica
analog_sa
andrea_mori x 4
dsavitsk
tagheuer
hirez69 x 2
ccliu
BDL
cddumat
regal

Total 23



There is a lot more of us out there, keep this open get the word out.
 
#85
now 26


TV Man x 2
merlin el mago
rtd
jameshillj
erin
Nikola Krivorov x 3
Rupor54
vitalica
analog_sa
andrea_mori x 5
dsavitsk
tagheuer
hirez69 x 2
ccliu
BDL
cddumat
regal
zoran
Jogi

although I am not quite sure how to implement it in my dac, I would give it a try...
 
#86
iancanada said:
Hi Vzs, Hi zinsula

Thank you so much for accepting my invitation to evaluate the daughter board. Shipped today. You should receive them in ten days. I’m looking forward to your good news, as well as fixing the bugsJ.

Ian
Click to expand...
Hi Ian, today I finally received the board.

Actually it stayed at the local postal office for more than 2 weeks 😕 but they couldn't give an explanation why haven't sent me a notification before.

Anyway, I will start integrating it into my system and will get back soon hopefully with good news.

Thanks, Zsolt
 
#88
vzs said:
Hi Ian, today I finally received the board.

Actually it stayed at the local postal office for more than 2 weeks 😕 but they couldn't give an explanation why haven't sent me a notification before.

Anyway, I will start integrating it into my system and will get back soon hopefully with good news.

Thanks, Zsolt
Click to expand...

Glad you got it finally. I thought you took vacation😀.
Please let me know for any support, as well as any bug 🙂. Looking forward to your good news.

Ian
 
#95
iancanada said:
Glad you got it finally. I thought you took vacation😀.
Please let me know for any support, as well as any bug 🙂. Looking forward to your good news.

Ian
Click to expand...
I can finally report that the PCM board is working wonderfully with my AD1865 DAC.
I tested the continuous and stopped bit clock modes and both are working nicely, so I'm using the later. No leading "warm up" clock is required for AD1865. I will come back with some pictures in the next few days, now I'm busy enjoying some music.

Thank you,
Zsolt
 
#96
vzs said:
I can finally report that the PCM board is working wonderfully with my AD1865 DAC.
I tested the continuous and stopped bit clock modes and both are working nicely, so I'm using the later. No leading "warm up" clock is required for AD1865. I will come back with some pictures in the next few days, now I'm busy enjoying some music.

Thank you,
Zsolt
Click to expand...

Hi Zsolt,
how are you driving the convertor board?
what MCLK are you using?
Andrea
 
#97
I'm using a SPDIF receiver based on CS8416 and a Squeezebox Touch as a source. I tested the converter board with all sample rates from 44.1Khz to 192Khz and can say it worked without problems. Unfortunately I cannot test it yet with 384Khz, but have in plans to buy the Amanero board.
For this proof of work testing I was using the stock clocks but will change the 22.5792Mhz to a Crystek cchd-957 in a minute. I cannot say any thoughts about quality or such as I didn't have time to do extensive listening.

I'm using a passive 200Ohm // 10nF as I/V and a SE Jfet preamp with a Jfet buffer after. I the next few days I will switch these to a Pass D1.

Since most of my music are CD ripped flac I will offline oversample them by 4x with SoX once I know what filter setting is best for me so will have some fun trying them out.

Zsolt
 
#98
vzs said:
I'm using a SPDIF receiver based on CS8416 and a Squeezebox Touch as a source. I tested the converter board with all sample rates from 44.1Khz to 192Khz and can say it worked without problems. Unfortunately I cannot test it yet with 384Khz, but have in plans to buy the Amanero board.
For this proof of work testing I was using the stock clocks but will change the 22.5792Mhz to a Crystek cchd-957 in a minute. I cannot say any thoughts about quality or such as I didn't have time to do extensive listening.

I'm using a passive 200Ohm // 10nF as I/V and a SE Jfet preamp with a Jfet buffer after. I the next few days I will switch these to a Pass D1.

Since most of my music are CD ripped flac I will offline oversample them by 4x with SoX once I know what filter setting is best for me so will have some fun trying them out.

Zsolt
Click to expand...

Thank you for your good news on evaluation the PCM daughter board. Congratulations! Looking forward for your future progress and your pictures.

Have a great weekend.

Ian
 
#99
33


TV Man x 2
merlin el mago
rtd
jameshillj
erin
Nikola Krivorov x 3
Rupor54
vitalica
analog_sa
andrea_mori x 5
dsavitsk
tagheuer
hirez69 x 2
ccliu
BDL
cddumat
regal
zoran
Jogi
Zen(zenelectro) x 2
Buzzforb
SPWON
crobbins5421
marcus1 X 2
 
Last edited:
#100
vzs;3254506 Since most of my music are CD ripped flac I will offline oversample them by 4x with SoX once I know what filter setting is best for me so will have some fun trying them out. Zsolt[/QUOTE said:
Are you usig the sox foobar plugin? That seems the only option for on the fly oversampling with a PC, the Mac possibly I believe has a better option.
Click to expand...
 
You must log in or register to reply here.
Top Bottom