• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

DAC ES9038 PRO Group Buys

Jump to Latest
#421
What about C5, it is not used? If it not used I can use C5 for C1 and C2 , because is 10uf but is 10v, can I use this one?

I ordered 47uf for C4, but C4 is not used, can I use this one for C8 that is a 10uf cap that I forgot to ordered.

What about the question in post #418.

Thanks
 
#422
JPDuarte said:
What about C5, it is not used? If it not used I can use C5 for C1 and C2 , because is 10uf but is 10v, can I use this one?

yes , all value you have you can use
C4,C5= parallel ( C4=0.1 uf, C5 = 10uf- 100uf)/

C1, C2 parallel ( C1== C5 = 10uf- 100uf)

All cap 10v is ok, becuae DC in need under 10V


I ordered 47uf for C4, but C4 is not used, can I use this one for C8 that is a 10uf cap that I forgot to ordered.

C8=10uF, it is ok

What about the question in post #418.

I never use that, not test now. im not sure it is ok!

i see : LT3045 the sample Data Lt3042, it is may be can change, please try it and tell me the result@!

thanks
Click to expand...
 
Last edited:
#424
Hi JPDuarte!

Please see in image for best advice to you now:

681984d1526871051-dac-es9038-pro-buys-pi3-supply-jpg


thanks
 
You must log in or register to reply here.
Top Bottom