• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

DAC-END R (ES9018) full assembled board

Status
Not open for further replies.
Jump to Latest
#1,042
Count me in.

DAC shield. Material: Copper-Nickel-Zinc alloy C7521

1. sipo75
2. Domi_78
3. bobkojek
4. Erlend Sæterdal
5. danielkol*2
7. kmajjo * 6
8. xtomm
9. MattMax
10. Gricko
11. Luizl
12. Misterrogers
13. randytsuch
14: CAAD
15: glt
16: axeexa(antony_shih)
17: bertchai
18: TarnishedEars
 
#1,043
FYI - I received my unit today. Unfortunately the front-panel received a couple of good-sized dings during transport. I still need to learn how to post pictures on this forum though.

I won't have time to try the unit for a few days though. So I have nothing to report about the sound, or its ability to decode higher res PCM signals via sp/dif yet.
 
Last edited:
#1,044
TarnishedEars said:
FYI - I received my unit today. Unfortunately the front-panel received a couple of good-sized dings during transport. I still need to learn how to post pictures on this forum though.

I won't have time to try the unit for a few days though. So I have nothing to report about the sound, or its ability to decode higher res PCM signals via sp/dif yet.
Click to expand...
please sent it to my e-mail

thanks
 
#1,046
DAC shield. Material: Copper-Nickel-Zinc alloy C7521

1. sipo75
2. Domi_78
3. bobkojek
4. Erlend Sæterdal
5. danielkol*2
7. kmajjo * 6
8. xtomm
9. MattMax
10. Gricko
11. Luizl
12. Misterrogers
13. randytsuch
14: CAAD
15: glt
16: axeexa(antony_shih)
17: bertchai
18: TarnishedEars
19: smoothquark (with complete DAC)
 
#1,049
DAC shield. Material: Copper-Nickel-Zinc alloy C7521

1. sipo75
2. Domi_78
3. bobkojek
4. Erlend Sæterdal
5. danielkol*2
7. kmajjo * 6
8. xtomm
9. MattMax
10. Gricko
11. Luizl
12. Misterrogers
13. randytsuch
14: CAAD
15: glt
16: axeexa(antony_shih)
17: bertchai
18: TarnishedEars
19: smoothquark (with complete DAC)
20: rliyung/raoul
21: masterkey (with complete DAC)
 
#1,052
DAC shield. Material: Copper-Nickel-Zinc alloy C7521

1. sipo75
2. Domi_78
3. bobkojek
4. Erlend Sæterdal
5. danielkol*2
7. kmajjo * 6
8. xtomm
9. MattMax
10. Gricko
11. Luizl
12. Misterrogers
13. randytsuch
14: CAAD
15: glt
16: axeexa(antony_shih)
17: bertchai
18: TarnishedEars
19: smoothquark (with complete DAC)
20: rliyung/raoul
21: masterkey (with complete DAC)
22: danny_66
 
#1,053
yildiray said:
Hi could you share again cabling block diagram ?

Thanks
Click to expand...

Also i have more questions:

1.@image 193 and 194 : I guess there are no any hole on chassis for amanero mounting ? Is it true ?

2.@image 191 and 197 : As you know there are a wrong polarized capacitor was mounted. ( :bored: I have to fix it but i can't see the capacitor's solders.How can i desolder it ?

3.And can you see any other wrong mounting ?
 

Attachments

  • IMAG0191.jpg
    IMAG0191.jpg
    770.1 KB · Views: 408
  • IMAG0192.jpg
    IMAG0192.jpg
    623 KB · Views: 386
  • IMAG0193.jpg
    IMAG0193.jpg
    763.1 KB · Views: 367
  • IMAG0196.jpg
    IMAG0196.jpg
    588.3 KB · Views: 356
  • IMAG0197.jpg
    IMAG0197.jpg
    733.8 KB · Views: 340
  • IMAG0198.jpg
    IMAG0198.jpg
    841.8 KB · Views: 140
#1,054
yildiray said:
Also i have more questions:

1.@image 193 and 194 : I guess there are no any hole on chassis for amanero mounting ? Is it true ?

chasiis ok, no problem

2.@image 191 and 197 : As you know there are a wrong polarized capacitor was mounted. ( :bored: I have to fix it but i can't see the capacitor's solders.How can i desolder it ?

yes, see image

3.And can you see any other wrong mounting ?
Click to expand...

yes, but i wil sent to you 2 x iv for change it!
thanks
 

Attachments

  • wrong.jpg
    wrong.jpg
    602.3 KB · Views: 165
#1,058
I give you all bought DAC32.
Material: Copper-Nickel-Zinc
alloy C7521

You just need to register, and pay shipping of about 5 to 10 $.

List your registration:

1. sipo75
2. Domi_78
3. bobkojek
4. Erlend Sæterdal
5. danielkol*2
7. kmajjo * 6
8. xtomm
9. MattMax
10. Gricko
11. Luizl
12. Misterrogers
13. randytsuch
14: CAAD
15: glt
16: axeexa(antony_shih)
17: bertchai
18: TarnishedEars
19: smoothquark (with complete DAC)
20: rliyung/raoul
21: masterkey (with complete DAC)
22: danny_66
23: yildiray
.....................
 
#1,059
quanghao said:
I give you all bought DAC32.
Material: Copper-Nickel-Zinc
alloy C7521

You just need to register, and pay shipping of about 5 to 10 $.

List your registration:

1. sipo75
2. Domi_78
3. bobkojek
4. Erlend Sæterdal
5. danielkol*2
7. kmajjo * 6
8. xtomm
9. MattMax
10. Gricko
11. Luizl
12. Misterrogers
13. randytsuch
14: CAAD
15: glt
16: axeexa(antony_shih)
17: bertchai
18: TarnishedEars
19: smoothquark (with complete DAC)
20: rliyung/raoul
21: masterkey (with complete DAC)
22: danny_66
23: yildiray
.....................
Click to expand...

ok thanks.
 
#1,060
added myself for the shield:

1. sipo75
2. Domi_78
3. bobkojek
4. Erlend Sæterdal
5. danielkol*2
7. kmajjo * 6
8. xtomm
9. MattMax
10. Gricko
11. Luizl
12. Misterrogers
13. randytsuch
14: CAAD
15: glt
16: axeexa(antony_shih)
17: bertchai
18: TarnishedEars
19: smoothquark (with complete DAC)
20: rliyung/raoul
21: masterkey (with complete DAC)
22: danny_66
23: yildiray
24: Boxi80

by the way... my DAC has arrived
tomorrow in the evening I will try it, and I will let you know!
 
Status
Not open for further replies.
Top Bottom