Conrad heatsinks group buy

[Tea-Bag]

Tapping, etc.

Count me in for all of that. That's just makes decent looking craftsmanship a possibility.

 

[xaudiox]

I'm interested with a pair plus milling, drilling etc.. though i'm from the Philippines.. I hope conrad can ship directly to my address... Thanks

 

[seventenths]

Calling my laziness into question ?... Might as well call me "chicken".
I'm in 😉



7/10

 

[MashBill]

Will the lip be 2 or 3mm deep (i.e. how thick can the top or bottom be so that it is flush) and how many screws along the side and what diameter?

I'd like all 12 of my sinks milled on top and bottom. Furthermore, if it's possible to add a pair of tapped screws on the front and the back ends of each for the ultimately in lazyiness, I'd do that too. If I'm the only person interested in this, I'll pay the entire setup fee if need be.

I'm interested in this too.

While I could go either way on the milling, I definitely would like the drilling and tapping on all four edges.

Bill

 

[hc167]

me too, I am in for milling drilling and taping.

I will add one more column to the list to track the number of sinks to be milled.
MashBill 4X US
Blues 4X US
jackh 4X US
pchw 8X US milled: 8
SCD 4X Canada
neb001 8X US
hc167 2X US milled, drilled, tapped.
luvdunhill 12X US
liasom 2X US
Algar_emi 4X Canada
ipolyakov 4X US
Guiness 4x US
cwujek 4x US
seventenths 2X US
mithomas 4x US
Westley 4X, may go 8X US
Cantskienuf, 4X, US
tubesguy 2X, US
claiborne 2X US, may go up to 4X
groov 4x, -may go up to 8 if new price break is reached- US
niner 4X, US, may go up to 8X
JimT 4X, Canada
JimS 2X, US
pollypocket 4x, Canada
stolbovoy 4x, US
BobEllis 4X, US
Cambe 4X, US
genome 2X, US
sts9fan 2X, US
rdk845 2X, US
John Broskie 2X, US
ken.berg 2X, US
bubba177 2X, US
RonD2 2X, US
ZUM911 possibly 6X, Australia
Jim Hamley 2X, US
RKH possibly 2X, US

 

[imix500]

Added to WIKI.

 

[cwujek]

Last day to get in on the list... I have contacted Conrad about drilling/tapping, and will post as soon as I have prices.

Chris

 

[stolbovoy]

I'd like 2 more:

MashBill 4X US
Blues 4X US
jackh 4X US
pchw 8X US milled: 8
SCD 4X Canada
neb001 8X US
hc167 2X US milled, drilled, tapped.
luvdunhill 12X US
liasom 2X US
Algar_emi 4X Canada
ipolyakov 4X US
Guiness 4x US
cwujek 4x US
seventenths 2X US
mithomas 4x US
Westley 4X, may go 8X US
Cantskienuf, 4X, US
tubesguy 2X, US
claiborne 2X US, may go up to 4X
groov 4x, -may go up to 8 if new price break is reached- US
niner 4X, US, may go up to 8X
JimT 4X, Canada
JimS 2X, US
pollypocket 4x, Canada
stolbovoy 6x, US - drilled and tapped holes on the top and bottom edges and the two ends
BobEllis 4X, US
Cambe 4X, US
genome 2X, US
sts9fan 2X, US
rdk845 2X, US
John Broskie 2X, US
ken.berg 2X, US
bubba177 2X, US
RonD2 2X, US
ZUM911 possibly 6X, Australia
Jim Hamley 2X, US
RKH possibly 2X, US

 

[liasom]

Edited WIKI to reflect my milled , drilled preference.

 

[Westley]

Count me in for the milled, drilled, and tapped also.

 

[Ed LaFontaine]

2 for me please, milled & drilled.

I'll pay for part of mine with "sweat equity". 😀

entered on the wiki

 

[Maousse]

4 for me, please, milled, drilled and taped. Thanks.

Put myself on the wiki 😉

 

[barry_e]

Added 8 to the WIKI

I hope I am not too late. I didn't see the final notice until the 27th.

Barry

 

[luvdunhill]

Last day to get in on the list... I have contacted Conrad about drilling/tapping, and will post as soon as I have prices.

Chris

can we also get the dimensions for how thick the lid and bottom can be, or a general drawing of what the strip will look like?

 

[neb001]

My friend just let me know that he wanted some too, so I've updated my total to reflect that, hopefully it's not too late. I've also taken the liberty to add up the quantity columns and updated the totals in the wiki.

 

[boonedog]

Late

Added 2 more to the WIKI.

If I'm too late no worries, just delete them. Hope I'm not though.

 

[Tube Noob]

Added myself to WIKI...also hope its not too late!

 

[cwujek]

No worries about late people. I'm still hammering out the details.....

 

[Tube Noob]

Thanks! 😀

 

[Maousse]

Thanks 😉