There's a huge difference between line arrays and point sources such as my EKTA-25's. But not in a bad way. I'm not an eloquent writer so I'll keep it brief. My new EKTA-25's (which I'm still getting use to) are very well balanced and musical and I can find no flaws. I'll certainly need more time with them but I've only noticed one specific difference so far. The line arrays present a sound stage where you feel that the performer is centered and a certain distance from you. The EKTA's do that but to a much lesser degree.
That's all for now.
Regards,
Dan
That's all for now.
Regards,
Dan
"which I'm still getting use to"
Disc can oftentimes be the most exciting part of changing things up. It'll be interesting to hear how things progress after everything burns in well and good. Thanks for the snippet!
Disc can oftentimes be the most exciting part of changing things up. It'll be interesting to hear how things progress after everything burns in well and good. Thanks for the snippet!
Changing two things at once can cloud the issue. I have an exceptional pair of speakers and an exceptional amplifier. Which is more exceptional?
(1) take the coffee table out of the way?
(2) what are the Towers Of Power?
(3) Nice... how does it sound?
Line arrays ( I got the Maggies ) present a more lifelike image than the point sources. Just... bigger....
(2) what are the Towers Of Power?
(3) Nice... how does it sound?
Line arrays ( I got the Maggies ) present a more lifelike image than the point sources. Just... bigger....
My line arrays are Linus III's designed by Rick Craig of Selah Audio. The construction was completely done by myself. I found them badly in need of a 'house curve' so I took them active. The lower drivers are currently driven by a DIY VFET2. The tweeters are driven by an M2x. And I have the DIY sub as well.
The Aleph 30 is currently driving the EKTA-25's (pictured in front) which you may or may not know is one of Troels Graveson kits.
The Aleph 30 is currently driving the EKTA-25's (pictured in front) which you may or may not know is one of Troels Graveson kits.
You did name the EKTA-25s so I found them... I didn't see the Towers of Power.
Next, you will need a pair of Aleph 2s.
Next, you will need a pair of Aleph 2s.
Is it fine to use this wiring for dual mono application with two 230VAC primary transformers?
Note that in many european countries you do not have polar mains plugs and do not know which one is going to be the live and which one the neutral.
Note that in many european countries you do not have polar mains plugs and do not know which one is going to be the live and which one the neutral.
Peppe, I hadn’t considered that application. I think that is a clever solution and it absolutely should work!
Nice!
I should also point out that a fuse before each transformer was omitted in the sketch for simplicity but should not be skipped in the build. I will probably also use one larger fuse at the main side (since a fuse holder is included in the IEC module).
I should also point out that a fuse before each transformer was omitted in the sketch for simplicity but should not be skipped in the build. I will probably also use one larger fuse at the main side (since a fuse holder is included in the IEC module).
I'm not an eloquent writer so I won't offer you any number of flowing adjectives of how my Aleph 30 sounds in my system.
Since what sounds good or bad is very subjective and a function of room and other equipment I'm going to take a more pragmatic approach.
I'd to thank Randy for the incredible amount of work (along with Father Pass's blessing) he put into resurrecting the Aleph legend and putting it within easy reach of the DIY community. Along with others I absolutely love my Aleph and couldn't recommend it more highly to anyone considering an amplifier project that seems to be universally adored.
Once again, many thanks to Randy and others that contribute so much to our DIY community.
Regards,
Dan
Since what sounds good or bad is very subjective and a function of room and other equipment I'm going to take a more pragmatic approach.
I'd to thank Randy for the incredible amount of work (along with Father Pass's blessing) he put into resurrecting the Aleph legend and putting it within easy reach of the DIY community. Along with others I absolutely love my Aleph and couldn't recommend it more highly to anyone considering an amplifier project that seems to be universally adored.
Once again, many thanks to Randy and others that contribute so much to our DIY community.
Regards,
Dan
Dan-
Let me help you.... I've been reading High End magazines for a while.... so I sort of know what they write... ;-)
My Alephs exhibit exhilaring microdynamics with wondrous macrodynamics and a sweetness of tone that puts Micheal Fremer out of adjectives and even tone adverbs.
The also render the tonality of the bodies of wooden instruments with a supremely tonality that clearly describes whether they were built by German elves in the Dark Forest or crafted by Northern Italians with Cypress of Rome or shaped by West Coast hippies in San Luis Obispo County Coast Red Woods.... I can even detect whether power tools or hand tools were used... indeed, I believe I can tell if they were plugged in or battery tools: Black and Decker batteries leave a memory distortion in the wood grain that exhibits a trace of glare for the french bassoons and violas.
The tonality of the brass is described in all of its metallic hardness but without a hint of clinical soundstaging and chromatic accuracy that is night perfect: you can tell whether they were serving Spanish Cava or French Champagne at the bar in the lobby.
The soundstaging is precise and non pareil... you can discern whether it was a rainy day or sunny at the park across the street... and what kind of wax, if any, was used to polish the back orchestra wall. And, whether there's a Fat Lady ready to sing on row O, seat 22.
Indeed, in some recordings made in the 50s but The Great Masters In NYC, I can discern the type of subways cars that went under the orchestra during the pianissimos, but not the crescendos... Unless it is Phillip Glass, naturally.
And that's just the Aleph 5... the Aleph 2 will take me a few more dozen adjectives... so I need to research the thesaurus for that. More on that anon.
Now, the F4.... well, if an amplifier has no sound in the forest....
Ditto (*) about Randy. BTW, that's not an Aleph in the picture... 🙂
(*) Hedley Lamarr: "Ditto"? "Ditto," you provincial putz?
Let me help you.... I've been reading High End magazines for a while.... so I sort of know what they write... ;-)
My Alephs exhibit exhilaring microdynamics with wondrous macrodynamics and a sweetness of tone that puts Micheal Fremer out of adjectives and even tone adverbs.
The also render the tonality of the bodies of wooden instruments with a supremely tonality that clearly describes whether they were built by German elves in the Dark Forest or crafted by Northern Italians with Cypress of Rome or shaped by West Coast hippies in San Luis Obispo County Coast Red Woods.... I can even detect whether power tools or hand tools were used... indeed, I believe I can tell if they were plugged in or battery tools: Black and Decker batteries leave a memory distortion in the wood grain that exhibits a trace of glare for the french bassoons and violas.
The tonality of the brass is described in all of its metallic hardness but without a hint of clinical soundstaging and chromatic accuracy that is night perfect: you can tell whether they were serving Spanish Cava or French Champagne at the bar in the lobby.
The soundstaging is precise and non pareil... you can discern whether it was a rainy day or sunny at the park across the street... and what kind of wax, if any, was used to polish the back orchestra wall. And, whether there's a Fat Lady ready to sing on row O, seat 22.
Indeed, in some recordings made in the 50s but The Great Masters In NYC, I can discern the type of subways cars that went under the orchestra during the pianissimos, but not the crescendos... Unless it is Phillip Glass, naturally.
And that's just the Aleph 5... the Aleph 2 will take me a few more dozen adjectives... so I need to research the thesaurus for that. More on that anon.
Now, the F4.... well, if an amplifier has no sound in the forest....
Ditto (*) about Randy. BTW, that's not an Aleph in the picture... 🙂
(*) Hedley Lamarr: "Ditto"? "Ditto," you provincial putz?
Last edited:
I have a differential pair rolling question. Has anyone sonically compared the Harris / Fairchild SFP9610 to the On-Semi FQP3P20 or Vishay IRF9610 in any Aleph Classic iteration?
I was just thinking about input pair rolling yesterday. I have vishay, Harris/Fairchild, FQP’s, some Toshibas, and now I have Samsung 9610’s inbound to me. I’d love to play around with this concept.
Is there a socket that works for to220’s?
I’m going to rebuild my aleph 30 monos this year using the new boards with c20/21. I was planning to use some NOS Harris IRFP240s. Why? Because I have them. And why not? And I’ll install sockets for front end rolling if I can find them.
Is there a socket that works for to220’s?
I’m going to rebuild my aleph 30 monos this year using the new boards with c20/21. I was planning to use some NOS Harris IRFP240s. Why? Because I have them. And why not? And I’ll install sockets for front end rolling if I can find them.
This obsolete one looks like a perfect match - Molex 10-18-2031:
https://www.mouser.com/ProductDetail/Molex/10-18-2031?qs=O8h8snhV7CofxxmQyCSnaw==
But since we can't get that, Mouser recommends a similar product. It might be a possibility: Molex 22-02-7033
https://www.mouser.com/ProductDetail/?qs=LQQHZ4xw2XAzHk3iP%2BUdiA==
I used this in my MOSFET Matcher.
https://www.digikey.com/en/products/detail/sullins-connector-solutions/TDU03DTOD/4213428
It's not going to fit. Pinout and size...
https://www.mouser.com/ProductDetail/Molex/10-18-2031?qs=O8h8snhV7CofxxmQyCSnaw==
But since we can't get that, Mouser recommends a similar product. It might be a possibility: Molex 22-02-7033
https://www.mouser.com/ProductDetail/?qs=LQQHZ4xw2XAzHk3iP%2BUdiA==
I used this in my MOSFET Matcher.
https://www.digikey.com/en/products/detail/sullins-connector-solutions/TDU03DTOD/4213428
It's not going to fit. Pinout and size...
Randy,
I’ve used these in builds for swapping TO-220 transistors. Most recently in ra7’s SCG preamp. Just cut the strip to size. Its a tight fit, but works.
Tons of choices on Amazon:
Chanzon Pin Header Strip for Arduino Gpio 20pin x 10pcs Female Headers Pins Straight Single Row Gold Plated Pitch 2.54mm 0.1 inch for PCB Connector Machine Breadboard Electronic Circuit Board https://a.co/d/edalv4l
I’ve used these in builds for swapping TO-220 transistors. Most recently in ra7’s SCG preamp. Just cut the strip to size. Its a tight fit, but works.
Tons of choices on Amazon:
Chanzon Pin Header Strip for Arduino Gpio 20pin x 10pcs Female Headers Pins Straight Single Row Gold Plated Pitch 2.54mm 0.1 inch for PCB Connector Machine Breadboard Electronic Circuit Board https://a.co/d/edalv4l
Thanks! I just ordered a 50 pack of 3 pin headers for less than DK or Mouser shipping.
I did the same yesterday on some SMD resistors. I needed 4. But I went for a kit of 2000 resistors for $15. A lifetime supply? Easier than onesie twosie DK orders.
If there's interest I could potentially kit up some "input roller" kits for folks. Leave Q3 in place. Swap pairs of Q1/Q2 in sockets. Try Vishay, FQP, Harris, and Samsung. I think I'm going to have very limited FQP, Samsung, and Vishay left. I have tons of Harris.
Probably a handful of folks could get in on this with all 4 options.
You're all on your own for the Toshiba 2SJ313's.
I did the same yesterday on some SMD resistors. I needed 4. But I went for a kit of 2000 resistors for $15. A lifetime supply? Easier than onesie twosie DK orders.
If there's interest I could potentially kit up some "input roller" kits for folks. Leave Q3 in place. Swap pairs of Q1/Q2 in sockets. Try Vishay, FQP, Harris, and Samsung. I think I'm going to have very limited FQP, Samsung, and Vishay left. I have tons of Harris.
Probably a handful of folks could get in on this with all 4 options.
You're all on your own for the Toshiba 2SJ313's.
I’m in if Randy is up to it but we’ll wait until you’ve done some testing ;-)
Gives us something to do since the primary difference here is that the input stage is not JFET based (like Aleph J, etc…)
Best,
Anand.
Gives us something to do since the primary difference here is that the input stage is not JFET based (like Aleph J, etc…)
Best,
Anand.
I'm curious to hear your impressions regarding the different parts. I have been enjoying your Harris 9610's quite a bit. Great matches too 👍
