Class D Amp with LM566, LM393 and 2XIRF530

[tmyr]

Hi! reading this thread i decided my first D attempt.. i sure hope i get something like in those youtube videos 🙂 Thank you sir Apex for your design and all who sheared their experiences here !

 

[apexaudio]

Hi! reading this thread i decided my first D attempt.. i sure hope i get something like in those youtube videos 🙂 Thank you sir Apex for your design and all who sheared their experiences here !

Nice work and cool heatsinks.
Regards

 

[apexaudio]

D2000 test with +/-100V

 

[stewin]

D2000 test with +/-100V

at what ohms/load sir apex??

 

[apexaudio]

at what ohms/load sir apex??

4R speaker

 

[apexaudio]

D2000 Mute circuit

 

[andrewlebon]

Hello apexaudio
greetings D2000 schematic #901 is it fully functional as shown in #1043

warm regard
Andrew

 

[apexaudio]

D2000 Stereo

 

[andrewlebon]

Hello apexaudio
greetings nice to see d2000 working can you post pcb if possible

warm regards
Andrew

 

[apexaudio]

Hello apexaudio
greetings nice to see d2000 working can you post pcb if possible

warm regards
Andrew

D2000 is not for DIY.
Regards

 

[c08bm]

Why not? schematic and layouts are already public...

 

[andrewlebon]

 

[apexaudio]

Why not? schematic and layouts are already public...

Yes but schematic and layout is not enough to made D2000, you must have expirience, instruments and you need my help if something go wrong. I suggest to everyone to made D200 for start.
Regards

 

[toreto009]

Hello. For d200.1 need a preamp? I think the output of my computer does not provide correct voltage to the input of the amplifier.

 

[apexaudio]

Hello. For d200.1 need a preamp? I think the output of my computer does not provide correct voltage to the input of the amplifier.

Post #661

 

[toreto009]

Post #661

How to connect the preamplifier with my filter for the subwoofer? I'm in the process of construction of a home amplifier for the subwoofer.

 

[apexaudio]

How to connect the preamplifier with my filter for the subwoofer? I'm in the process of construction of a home amplifier for the subwoofer.

Can you post schematic of this filter? You can add gain in filter circuit so you don't need preamp.

 

[toreto009]

Can you post schematic of this filter? You can add gain in filter circuit so you don't need preamp.

Here is a diagram and pcb

 

[toreto009]

PCB

 

[apexaudio]

Here is a diagram and pcb

Replace R23 use 47k instead 10k and you have gain 5X