Cheapest PCB's ( with FREE tinning , FREE drilling)
Below pcb's have been manufactured for our forum friend - "KVP" - from Belgium
Below pcb's have been manufactured for our forum friend - "KVP" - from Belgium
An externally hosted image should be here but it was not working when we last tested it.
Thank you.
I would like to thank our dear member msdesigner to make it possible to get those 2 boards at a very reasonable price. Very helpful throughout the complete process.
I would like to thank our dear member msdesigner to make it possible to get those 2 boards at a very reasonable price. Very helpful throughout the complete process.
Cheapest PRINTED-CIRCUIT-BOARDS, with FREE TINNING and FREE SILKSCREEN (mask components)
Below is the SILKSCREEN of board (TOP layer)
Below is the SILKSCREEN of board (TOP layer)
An externally hosted image should be here but it was not working when we last tested it.
Cheapest PRINTED-CIRCUIT-BOARDS, with FREE TINNING and FREE SILKSCREEN (mask components)
Below is the BOTTOM layer ( with tinned traces and pad's) , of above posted board.
Below is the BOTTOM layer ( with tinned traces and pad's) , of above posted board.
An externally hosted image should be here but it was not working when we last tested it.
Last edited:
Cheapest PRINTED-CIRCUIT-BOARDS, with FREE TINNING and FREE SILKSCREEN (mask components)
Below is the BOTTOM layer ( with tinned traces and pad's)
Below is the BOTTOM layer ( with tinned traces and pad's)
An externally hosted image should be here but it was not working when we last tested it.
Cheapest PRINTED-CIRCUIT-BOARDS, with FREE TINNING and FREE SILKSCREEN (mask components)
Below is the BOTTOM layer ( with tinned traces and pad's).
Below is the BOTTOM layer ( with tinned traces and pad's).
An externally hosted image should be here but it was not working when we last tested it.
Top layer ( tinned traces + silkscreen ) of the pcb posted on 3rd June.
An externally hosted image should be here but it was not working when we last tested it.
Cheapest DOUBLE LAYER, PRINTED-CIRCUIT-BOARDS on FR4 support, with FREE tinning and FREE drilling.
Below it's the TOP layer of big size board with 274x146 mm.
Below it's the TOP layer of big size board with 274x146 mm.
An externally hosted image should be here but it was not working when we last tested it.
Last edited:
Cheapest DOUBLE LAYER, PRINTED-CIRCUIT-BOARDS on FR4 support, with FREE tinning and FREE drilling.
Below it's the BOTTOM layer of big size board with 274x146 mm.
An externally hosted image should be here but it was not working when we last tested it.
Cheapest PCB's ( with FREE tinning , FREE drilling)
CUTTING ON EDGES = FREE
CUTTING ON EDGES = FREE
An externally hosted image should be here but it was not working when we last tested it.
Cheapest PCB's ( with FREE tinning , FREE drilling)
An externally hosted image should be here but it was not working when we last tested it.
Cheapest PCB's ( with FREE tinning , FREE drilling)
The boards can not be panelized (more boards/sheet) .
For small boards (under 50x50mm ) the max. quantity / board type ( model), could be 6 pcs.
The boards can not be panelized (more boards/sheet) .
For small boards (under 50x50mm ) the max. quantity / board type ( model), could be 6 pcs.
An externally hosted image should be here but it was not working when we last tested it.
Beginning with 20 July 2015, the printed circuit boards, could be manufactured on (THINNER) FR4, as follow:
1.SINGLE SIDE ............ start with 0,0285 EURO/cm2
- support thickness = 0,5 mm
- copper thickness =18 um
2.DOUBLE SIDE.................start with 0,0553 EURO/cm2
- support thickness = 1 mm
- copper thickness =18 um / each side
1.SINGLE SIDE ............ start with 0,0285 EURO/cm2
- support thickness = 0,5 mm
- copper thickness =18 um
2.DOUBLE SIDE.................start with 0,0553 EURO/cm2
- support thickness = 1 mm
- copper thickness =18 um / each side
Last edited:
Cheapest PRINTED-CIRCUIT-BOARDS, with FREE TINNING and FREE SILKSCREEN (mask components)
Below is the SILKSCREEN of board (TOP layer)
Below is the SILKSCREEN of board (TOP layer)
An externally hosted image should be here but it was not working when we last tested it.
RED pcb's , on FR4 with 0,5 mm thickness.
Available colors ( paint ) : RED , WHITE
Available soon: GREEN, BLUE, BLACK, ORANGE
Painting is applied for FREE only for 0,5 mm support , to opposite layer of traces.
Available colors ( paint ) : RED , WHITE
Available soon: GREEN, BLUE, BLACK, ORANGE
Painting is applied for FREE only for 0,5 mm support , to opposite layer of traces.
An externally hosted image should be here but it was not working when we last tested it.
Below can be seen the tinned traces layer of pcb silkscreen posted on 16 July.
An externally hosted image should be here but it was not working when we last tested it.
Cheapest DOUBLE LAYER, PRINTED-CIRCUIT-BOARDS on FR4 support, with FREE tinning and FREE drilling.
Below it's the TOP layer
Below it's the TOP layer
An externally hosted image should be here but it was not working when we last tested it.
Cheapest DOUBLE LAYER, PRINTED-CIRCUIT-BOARDS on FR4 support, with FREE tinning and FREE drilling.
Below it's the BOTTOM layer ( of above posted board)
Below it's the BOTTOM layer ( of above posted board)
An externally hosted image should be here but it was not working when we last tested it.
Cheapest PCB's ( with FREE tinning , FREE drilling)
An externally hosted image should be here but it was not working when we last tested it.
