Cheapest PCB's (printed circuit boards), single and double layer
FREE - tinning ( ONLY for boards without ground plan)
FREE - silkscreen
FREE -drilling
Below can be seen the TOP side ( of silkscreen layer)
FREE - tinning ( ONLY for boards without ground plan)
FREE - silkscreen
FREE -drilling
Below can be seen the TOP side ( of silkscreen layer)
An externally hosted image should be here but it was not working when we last tested it.
Cheapest PCB's (printed circuit boards), single and double layer
FREE - tinning ( ONLY for boards without ground plan)
FREE - silkscreen
FREE -drilling
Below can be seen the BOTTOM side ( of tinned traces layer)
FREE - tinning ( ONLY for boards without ground plan)
FREE - silkscreen
FREE -drilling
Below can be seen the BOTTOM side ( of tinned traces layer)
An externally hosted image should be here but it was not working when we last tested it.
Cheapest PCB's ( with FREE tinning , FREE drilling)
(The boards post #240 and #243 have been manufactured for our forum friend "Misterwolf" from Italy). The communication was very fast and clear with him.I hope he will solder and make soon the tests of his RIAA preamp, than he can feel free to publish here his ready made pics with boards "at work'
(The boards post #240 and #243 have been manufactured for our forum friend "Misterwolf" from Italy). The communication was very fast and clear with him.I hope he will solder and make soon the tests of his RIAA preamp, than he can feel free to publish here his ready made pics with boards "at work'
An externally hosted image should be here but it was not working when we last tested it.
Hi msdesigner,
the RIAA board and power supply board finished, I have tested (and listened) this RIAA developed by Fabrizio Marignoni.
Very good sound for me!
Many thanks msdesigner for your great job with boards!
Boards are really good and the tinning gives a professional look.
the RIAA board and power supply board finished, I have tested (and listened) this RIAA developed by Fabrizio Marignoni.
Very good sound for me!
Many thanks msdesigner for your great job with boards!
Boards are really good and the tinning gives a professional look.
Cheapest PCB's
Below are the tinned boards on CEM3 support, for LM3886
Below are the tinned boards on CEM3 support, for LM3886
An externally hosted image should be here but it was not working when we last tested it.
Cheapest printed circuit boards, on FR4 support
TINNED (tinning is FREE for boards without ground plan and thin traces ( less than 1 mm width)
TINNED (tinning is FREE for boards without ground plan and thin traces ( less than 1 mm width)
An externally hosted image should be here but it was not working when we last tested it.
Cheapest PCB ( printed circuit board) on CEM3 ( professional version)
TINNING + DRILLING = FREE
TINNING + DRILLING = FREE
Cheapest PCB's on FR4
Tinning + drilling = FREE
Bellow board is manufactured on 0,5 mm FR4
The FR4 support with 0,5 mm thickness is available , ONLY for single layer.
The price for this support is start with 2,5 Euro / dm2
Tinning + drilling = FREE
Bellow board is manufactured on 0,5 mm FR4
The FR4 support with 0,5 mm thickness is available , ONLY for single layer.
The price for this support is start with 2,5 Euro / dm2
An externally hosted image should be here but it was not working when we last tested it.
The minim cost (with shipping included with National Post Mail services) is : 40 Euro***
***In the above presented price it is included:
1- one board with size between 1 cm2 - 100 cm2
2- Board has single layer , on CEM3 support
3- FREE drilling
4 - FREE tinning ( ONLY boards without ground plan-"rastnet")
5- Shipping with ARRIVAL CONFIRMATION RECEIPT.
6 - The above mentioned cost is valid ONLY for shipping in European countries.
Thanks for yours understanding.
Mihai
***In the above presented price it is included:
1- one board with size between 1 cm2 - 100 cm2
2- Board has single layer , on CEM3 support
3- FREE drilling
4 - FREE tinning ( ONLY boards without ground plan-"rastnet")
5- Shipping with ARRIVAL CONFIRMATION RECEIPT.
6 - The above mentioned cost is valid ONLY for shipping in European countries.
Thanks for yours understanding.
Mihai
cheapest Printed circuit boards on FR4 support , 1 mm thickness
Tinning= FREE
Drilling = FREE
Shipping = FREE (European countries ONLY , with arrival confirmation receipt)
Tinning= FREE
Drilling = FREE
Shipping = FREE (European countries ONLY , with arrival confirmation receipt)
An externally hosted image should be here but it was not working when we last tested it.
Cheapest DOUBLE-LAYER boards on FR4 support with 1 and 1,5 mm thickness.
Layers synchronizing is 99,5% at least.
Tinning= FREE
Drilling = FREE
Silkscreen = FREE
Below can be found the TOP layer.
Layers synchronizing is 99,5% at least.
Tinning= FREE
Drilling = FREE
Silkscreen = FREE
Below can be found the TOP layer.
An externally hosted image should be here but it was not working when we last tested it.
Cheapest DOUBLE-LAYER boards on FR4 support with 1 and 1,5 mm thickness.
Layers synchronizing is 99,5% at least.
Tinning= FREE
Drilling = FREE
Silkscreen = FREE
Below can be found the BOTTOM layer ( of above presented board)
Layers synchronizing is 99,5% at least.
Tinning= FREE
Drilling = FREE
Silkscreen = FREE
Below can be found the BOTTOM layer ( of above presented board)
An externally hosted image should be here but it was not working when we last tested it.
Beginning with 01 december 2015 the printed circuit boards can be manufactured on FLEXIBLE support.
The manufacturing prices are as follow:
- starting with 20Euro/dm2 for SINGLE LAYER
-starting with 30EURO/dm2 for DOUBLE LAYER
The support used it's similar with the below sample.
The manufacturing prices are as follow:
- starting with 20Euro/dm2 for SINGLE LAYER
-starting with 30EURO/dm2 for DOUBLE LAYER
The support used it's similar with the below sample.
An externally hosted image should be here but it was not working when we last tested it.
Cheapest PRINTED CIRCUIT BOARDS on FR4 support
TINNING = Free
DRILLING = Free
SHIPPING = FREE***
***Free shipping is valid ONLY for European countries, and package less than 100 grams. Shipping is done it through National Post mail services with ARRIVAL CONFIRMATION RECEIPT.
TINNING = Free
DRILLING = Free
SHIPPING = FREE***
***Free shipping is valid ONLY for European countries, and package less than 100 grams. Shipping is done it through National Post mail services with ARRIVAL CONFIRMATION RECEIPT.
An externally hosted image should be here but it was not working when we last tested it.
Cheapest PRINTED CIRCUIT BOARDS on FR4 support
TINNING = Free
DRILLING = Free
SILKSCREEN = Free
SHIPPING = FREE***
***Free shipping is valid ONLY for European countries, and package less than 100 grams. Shipping is done it through National Post mail services with ARRIVAL CONFIRMATION RECEIPT.
Below can be seen the SILKSCREEN of above posted board.
TINNING = Free
DRILLING = Free
SILKSCREEN = Free
SHIPPING = FREE***
***Free shipping is valid ONLY for European countries, and package less than 100 grams. Shipping is done it through National Post mail services with ARRIVAL CONFIRMATION RECEIPT.
Below can be seen the SILKSCREEN of above posted board.
Cheapest PRINTED CIRCUIT BOARDS on FR4 support
TINNING = Free
DRILLING = Free
SHIPPING = FREE***
***Free shipping is valid ONLY for European countries, and package less than 100 grams. Shipping is done it through National Post mail services with ARRIVAL CONFIRMATION RECEIPT
TINNING = Free
DRILLING = Free
SHIPPING = FREE***
***Free shipping is valid ONLY for European countries, and package less than 100 grams. Shipping is done it through National Post mail services with ARRIVAL CONFIRMATION RECEIPT
An externally hosted image should be here but it was not working when we last tested it.
PCB's on CEM3 professional with big size 304x203mm
FREE = tinning
FREE = drilling
SHIPPING = FREE***
***Free shipping is valid ONLY for European countries, and package less than 100 grams. Shipping is done it through National Post mail services with ARRIVAL CONFIRMATION RECEIPT
FREE = tinning
FREE = drilling
SHIPPING = FREE***
***Free shipping is valid ONLY for European countries, and package less than 100 grams. Shipping is done it through National Post mail services with ARRIVAL CONFIRMATION RECEIPT
An externally hosted image should be here but it was not working when we last tested it.
Below can be seen the SILKSCREEN (components mask) of the boards shown in the post #256.
An externally hosted image should be here but it was not working when we last tested it.
Cheapest-printed-circuit boards, on CEM3 (professional version)
Below board has been manufactured from low quality .GIF (with less than 96 dpi)
Below board has been manufactured from low quality .GIF (with less than 96 dpi)
An externally hosted image should be here but it was not working when we last tested it.
Below can be seen the 2 boards done it for our forum friend OMNIEX from France.
As soon he will receive it, he will "populate" the boards and I'll be happy to be published by him the finished release.
The boards manufactured on CEM3, have a PROFESSIONAL TINNING ( that's contain >1% SILVER )
As soon he will receive it, he will "populate" the boards and I'll be happy to be published by him the finished release.
The boards manufactured on CEM3, have a PROFESSIONAL TINNING ( that's contain >1% SILVER )
An externally hosted image should be here but it was not working when we last tested it.
Last edited: