• The Vendor's Bazaar forum is for commercial offers and transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

CDROM control KITs VFD version

Status
Not open for further replies.
Jump to Latest
#224
Compatibility list

Hi all,

I want to make a list of compatible and non-compatible drives. Could you please support me with your experiences?

What I need? Just the brand and type of a drive and compatibility to the controller. The list will be prsented on a dutch forum, but I will put a copy here.

Best regards,
Mischa
 
#227
What is everyone using for power supplies? - a computer power supply really isn't ideal due to the fan and possible electronic noise affecting circuitry. Anyone made a dedicated one rather than a walwart or anything?

How is the soundstage with the various cd players?

How do they compare to say a basic DVD player transport with DAC when they both use digital out?

Sorry about all the questions it is just that I am considering making one with either my Lite-on, acer or diamond data drives.

Cheers.
 
#229
Gabba said:
What is everyone using for power supplies? - a computer power supply really isn't ideal due to the fan and possible electronic noise affecting circuitry. Anyone made a dedicated one rather than a walwart or anything?

How is the soundstage with the various cd players?

How do they compare to say a basic DVD player transport with DAC when they both use digital out?

Sorry about all the questions it is just that I am considering making one with either my Lite-on, acer or diamond data drives.

Cheers.
Click to expand...


Hi Gabba

I have some power supply board for sell.Like the pictures,need to diy yourself.

Regards,
Huang
 

Attachments

  • psb.jpg
    psb.jpg
    73.6 KB · Views: 607
#230
robertc said:
My control kit still not arrive yet. payment made on 12-12-08.
🙁

I tried my Aopen cd rom from the audio out to my tube amp. sound terrible. ANyone tried the digital out from cd rom to DAC?
Click to expand...


acid_k2 said:
My kit is not arrived too. Paid on 09.12.08.

Maybe italian mail service is s**t... I'll re-check mail this evening.

I'm currently testing a cd-rom with a 15 years old 100W AT SMPS, from a 80486 PC, with brand new caps... it works good! ....and I'm searching for a good low-cost DAC...🙄
Click to expand...


Hi Robertc & Acid_k2

Have you received your kit?If you got it just left me a message.Thanks

Regards,
Huang
 
#232
Dougie085 said:
Well it would have been nice if you mentioned that PSU kit before I ordered mine 🙂 How much do you sell them for? Guessing I'd need 2 as it doesn't seem to be dual voltages. One for 12v one for 5v.
Click to expand...


Hi Dougie085

Yeah you need 2 this one for 12V another for 5V.The price seems too high before,So I make it lower.For one is 16USD.For two is 25USD.Small order available.(including shipping registered&paypal fee)

The power supply including:
Resistance: 200ohm 1/4W 1pcs
Capacitance: NIPPON 4700uF/35V 1pcs
ELNA 1000uF/35V 1pcs
Rubycon(OR ELNA) 100uF/363V 2pcs
Philips CBB 0.1uF/100V 7pcs
Variable resistor:3906 10K 1pcs
Rectifier diode:FR307 3A 4pcs
Radiator:Black 1pcs
Fixed screw:¦µ3x6mm 1pcs
Insulation gasket: ¦µ3 1cps
Thermal insulation gasket: 1pcs
Voltage IC:LT1084 1pcs
PCB:Blue¡¡11.16£ø4.2cm 1cps

Regards,
Huang
 
#234
Well I got my kit yesterday. I hooked it up real quick to verify that it works properly and everything. I'm powering the actually controller/VFD off a usb port for now. I took a quick video, it works great off my plextor drive and there is just a couple second spot in the beginning where it spools real fast and is a bit noisy (remember outside a chassis) and then it slows down and is completely silent. I think the plextor/VFD kit setup is going to be a winner! I haven't had a chance to listen to it yet because I don't have a volume control on my dac. Basically my setup right now is PC to DAC then DAC to AMP. So my PC controls volume until TPA releases the AC1. I have to dig out my pot volume control I have stashed somewhere.

 
#236
markenvy said:
Hi,
I'd like to buy 2 psu, one for 5v and one for 12v and 1 cd rom control kit. Could you tell me total cost with shipping to italy? I think It's possible to have some discount. Thanks

What kind of transformer do I need for the psu? Bye
Click to expand...


thefragger said:
Hey,

How much would one kit with 12V and 5V supplies cost to ship to Canada?

How much for just the kit without the supplies?


Thanks!
Philip.
Click to expand...


Hi Markenvy

Total for 2 psu to Italy cost 25USD.This is the discount price.Can't make it lower..Sorry..

Hi Philip

You need two kit to have 12V&5V out.The psu kit including what I say on Post #232.Not very clear sure what you mean"the kit without the supplies"..You mean the transformer?the psu kit without transformer.

Regards
Huang
 
#237
Hi slowgay,
I asked for
- 2 psu
-1 cd rom control kit with lcd display

with shipping to Italy.
It's my fault, I've not explained well, sorry.
If you tell me your email and paypal tomorrow I'll make payment and send to you my address. Thanks

Regards
Markenvy
 
#238
markenvy said:
Hi slowgay,
I asked for
- 2 psu
-1 cd rom control kit with lcd display

with shipping to Italy.
It's my fault, I've not explained well, sorry.
If you tell me your email and paypal tomorrow I'll make payment and send to you my address. Thanks

Regards
Markenvy
Click to expand...


Hi Markenvy

Oh,sorry..it's my fault.I understand error with what you said before.You mean 2 psu + 1 cdrom control kit <25+32.That's right.I should make it less than 57USD.
Total for 2 psu and 1 cd rom control kit shipping to Italy cost 54USD.My Email and Paypal adress is hsslow@msn.com
Thanks.

Regards
Huang
 
#240
Hi all

The DC Power DIY kit 's some electronic component are changed

Resistance-----------------200ohm-1/4W------------------1pcs
Capacitance----NIPPON(OR-Panasonic)-4700uF/35V----------1pcs
-----------------------------ELNA-1000uF/35V------------1pcs
-------------samwha(OR-ELNA)-100uF/363V-----------------2pcs
----------------------Philips-CBB-0.1uF/100V------------7pcs
Variable resistor--------3296-10K-----------------------1pcs
Rectifier diode----------FR307-3A-----------------------4pcs
Radiator------------------Black-------------------------1pcs
Fixed screw--------------¦µ3x6mm------------------------1pcs
Insulation gasket----------------------¦µ3--------------1cps
Thermal insulation gasket-------------------------------1pcs
Voltage IC----------------------LT1084------------------1pcs
PCB----------------------Blue--11.16£ø4.2cm-------------1cps

Finished board may add 4USD more.

Thanks
Huang
 

Attachments

  • 3.jpg
    3.jpg
    22.5 KB · Views: 434
Status
Not open for further replies.
Top Bottom