These are the forum names of those who have completed payment.
If your name is not on this list, and you think it should be, drop me a message please. I did send specific instructions as to where to send your information.
Anyone who expressed an interest but has not yet paid, please note, there is only room for 4 more people. The PCB's have now been ordered (30)
If your name is not on this list, and you think it should be, drop me a message please. I did send specific instructions as to where to send your information.
Anyone who expressed an interest but has not yet paid, please note, there is only room for 4 more people. The PCB's have now been ordered (30)
- Mikeyb
- Joolz
- MYL
- brommermartin
- OtisCampbell
- gwrskien
- marra
- Flikoman
- pelayostyle
- Snowstate
- steady7
- bologna1
- sasha70
- ferret
- ringeraja
- MShipmanPE
- tompa909
- Smangus
- Mull3t
- entropist
- awkwardbydesign- I need your address!
I emailed you my address at 22.01 yesterday. Did it not arrive?[*]awkwardbydesign- I need your address!
BTW, do we get a schematic with the PCBs? How would I know where to sprinkle my favourite fairy dust?
No Schenatic I'm afraid. I dont have it, as it's not my design.I emailed you my address at 22.01 yesterday. Did it not arrive?
BTW, do we get a schematic with the PCBs? How would I know where to sprinkle my favourite fairy dust?
There are important components marked out in the BOM.
I'll check my emails. I may have missed it.
Oh dear. I'm not sure I'm clever enough to construct this without one!No Schenatic I'm afraid. I dont have it, as it's not my design.
There are important components marked out in the BOM.
I'll check my emails. I may have missed it.
Oh you are.Oh dear. I'm not sure I'm clever enough to construct this without one!
"Its paint by numbers" easy
I managed and I was completely novice at it.
Well, at the the very beginning of the thread, I go into great detail about how the project came together.My main concern though, is if it doesn't work first time, either through a faulty or damaged compoinent, or my mistake, I won't be able to fault find. And it seems rather odd that you can make and sell PCBs to someones else's design, but not supply the circuit diagram!
It is the position of the circuit designer (Firebottle or Vivant on DIYaudio) wasnt happy to have his Schematic shared online.
There was a point made that someone could reverse engineer it, if they wanted to. Which I understand.
Anyway, the circuit was given to me "under licence" (of sorts) on the agreement that isnt distributed.
This has been upheld for 3 years and over 50 PCBs have been sold, with only two people needing any help at all.
Honestly, its SO easy to build this, if you follow the BOM.
However, if anyone does get stuck, or cant get it working, we have supported them for the cost of postage!!
I will talk to Alan and see if he is happy to share the schematic, but the choice is his....not mine.
Looks very promising. Do you just send them your requirements for trafo or you can order a specific one through their webshop directly? Power transformers - Internet shop Toroidy.plTransformer Requirements are:
Primary should be local Voltage but UK should spec 240v
Secondary I - 165v @0.1A
Secondary II - 9.5-0-9.5v @1A
I use Toroidy.pl wherever possible
I dont think he does the required Transformer "off the shelf"Looks very promising. Do you just send them your requirements for trafo or you can order a specific one through their webshop directly? Power transformers - Internet shop Toroidy.pl
I have always specified my needs and asked for at least 10" of wire from the
traffo, as they came a bit shorter than desired on the first one.
It's OK, I've spoken to Alan myself, so I'm happy to continue. He has helped me more than once in the past, so he knows how useless I am.I will talk to Alan and see if he is happy to share the schematic, but the choice is his....not mine.
BTW, have you received my details now?
Last edited:
It's OK, I've spoken to Alan myself, so I'm happy to continue. He has helped me more than once in the past, so he knows how useless I am.
BTW, have you received my details now?
Ye, Alan called me to let me know you'd been in touch.
Yes, your details have been received, thank you.
Last edited:
These are the forum names of those who have completed payment.
If your name is not on this list, and you think it should be, drop me a message please. I did send specific instructions as to where to send your information.
Anyone who expressed an interest but has not yet paid, please note, there is only room for 4 more people. The PCB's have now been ordered (30)
- Mikeyb
- Joolz
- MYL
- brommermartin
- OtisCampbell
- gwrskien
- marra
- Flikoman
- pelayostyle
- Snowstate
- steady7
- bologna1
- sasha70
- ferret
- ringeraja
- MShipmanPE
- tompa909
- Smangus
- Mull3t
- entropist
- awkwardbydesign- I need your address!
Sorry for the delay. I have just paid, and followed the instructions that were PM'd to me. Hopefully all is good with this.
Forum Name
Mikeyb
Joolz
MYL
brommermartin
OtisCampbell
gwrskien
marra
Flikoman
pelayostyle
Snowstate
steady7
bologna1
sasha70
ferret
ringeraja
MShipmanPE
tompa909
Smangus
Mull3t
entropist
awkwardbydesign
IXIX
gtose
thehoj
nieslek
Thank you to those above named members for your payment and your postage details. Apologies to those i had to ask again. My email address marked you as SPAM!!
This round of the GB is now closed.
I will let you all know when the PCB's arrive via this thread so please stay tuned!
Thanks
Oliver
Mikeyb
Joolz
MYL
brommermartin
OtisCampbell
gwrskien
marra
Flikoman
pelayostyle
Snowstate
steady7
bologna1
sasha70
ferret
ringeraja
MShipmanPE
tompa909
Smangus
Mull3t
entropist
awkwardbydesign
IXIX
gtose
thehoj
nieslek
Thank you to those above named members for your payment and your postage details. Apologies to those i had to ask again. My email address marked you as SPAM!!
This round of the GB is now closed.
I will let you all know when the PCB's arrive via this thread so please stay tuned!
Thanks
Oliver
Too late for this round but if you wish to start a second round, you can.Add me to the list please - if possible.
Thank you!
Can leave it open to interested parties for a few weeks?
I already bought the Chinese trafo. I'll try my luck, but if all else fails I was thinking of going with SUMR Transformers - SumR - Richard Sumner Technology - in Canada. Any other good options in the US - North America?
Forum Name
Mikeyb
Joolz
MYL
brommermartin
OtisCampbell
gwrskien
marra
Flikoman
pelayostyle
Snowstate
steady7
bologna1
sasha70
ferret
ringeraja
MShipmanPE
tompa909
Smangus
Mull3t
entropist
awkwardbydesign
IXIX
gtose
thehoj
nieslek
*Stanney2001 - Last person please. I accept your payment as you were one of the original interested parties.
This round of the GB is now closed, if anyone else sends money, I will automatically put you on the next round.
Thanks.
Mikeyb
Joolz
MYL
brommermartin
OtisCampbell
gwrskien
marra
Flikoman
pelayostyle
Snowstate
steady7
bologna1
sasha70
ferret
ringeraja
MShipmanPE
tompa909
Smangus
Mull3t
entropist
awkwardbydesign
IXIX
gtose
thehoj
nieslek
*Stanney2001 - Last person please. I accept your payment as you were one of the original interested parties.
This round of the GB is now closed, if anyone else sends money, I will automatically put you on the next round.
Thanks.
- Home
- Group Buys
- Bigbottle MM/MC Hybrid Valve Phonostage PCB