After reading up over the last few nights and taking on board what Scott and others have said, I think I'll try a front firing build. I drew up a design with around 2.7m line length and utilizing the whole front area of the cabinet for the mouth/exit, around 110x35 cm.
I'm guessing the siting location wd be between a 1/4 and 1/8 space, so maybe I shd work out the mouth maths on a 1/6 ratio.
I'm guessing the siting location wd be between a 1/4 and 1/8 space, so maybe I shd work out the mouth maths on a 1/6 ratio.
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.