I have a pair of 18-0, 18-0 volt torroids rated at 120VA; would one each be enough for each channel of the Babblefish amp? Thanks.
first batch of balanced (too 😉 )Babelfish J pcbs will be available on end of next week;
for now-this little batch is :
FR-4 1,6mm ,tinned 50Um traces,semi mat green solder mask,yellow parts overlay.
I hope that I'll be capable to offer at least 10 stereo sets along with pair of 2SJ109BL ,starting few weeks from now.
after that-I'll try to secure more 109s and to find some adequate singles as adequate substitute........matched off course;
I'm working on Paypal account...complicated story.......my mail addy,bank account in Hungary........Serbia isn't covered with Paypal
I'll keep you informed
for now-this little batch is :
FR-4 1,6mm ,tinned 50Um traces,semi mat green solder mask,yellow parts overlay.
I hope that I'll be capable to offer at least 10 stereo sets along with pair of 2SJ109BL ,starting few weeks from now.
after that-I'll try to secure more 109s and to find some adequate singles as adequate substitute........matched off course;
I'm working on Paypal account...complicated story.......my mail addy,bank account in Hungary........Serbia isn't covered with Paypal
I'll keep you informed
Well done and fascinating, Zen! Very nice layout too.
I would really like to get the possibility of testing and hearing it, expecially if it's connected in balanced mode to the Aleph 1.7 I'm working on...
Hi
Nicola
I would really like to get the possibility of testing and hearing it, expecially if it's connected in balanced mode to the Aleph 1.7 I'm working on...
Hi
Nicola
tnx, boyz'n'grlz.......lets see can I make a favor to few DIYas and make some beer money for mine and Oly's audio and life related musings 😉
just for teasin'..........
black one is exactly 1/4 of my J heatsink
sorta silver one will be soon halved (each half for one channel) for my un-needed KSA100MKblabla project.......pcbs for that arrived courtesy to our friend AR2
he also send me Aleph X pcbs........(did I wrote that already?.........nah -knowing me ,mebbe just 3 times 😉 ) .......good start for Babelfish J X proto
anyway-who need proto for that
now I have problem........too many amps ,not enough rooms ,counting on fact that all my spks are on efficient side.........randomly I need more than 10W
just for teasin'..........
black one is exactly 1/4 of my J heatsink
sorta silver one will be soon halved (each half for one channel) for my un-needed KSA100MKblabla project.......pcbs for that arrived courtesy to our friend AR2
he also send me Aleph X pcbs........(did I wrote that already?.........nah -knowing me ,mebbe just 3 times 😉 ) .......good start for Babelfish J X proto
anyway-who need proto for that
now I have problem........too many amps ,not enough rooms ,counting on fact that all my spks are on efficient side.........randomly I need more than 10W
Attachments
- Status
- Not open for further replies.