steenoe said:Looking at your psu, you mean to use a 9mH?? That is gonna be one big darn mother######!You do know, that you are supposed to use aircore inductors right?
Steen🙂
if you have some wire and few old small xformers,I'll send you or ,even better ,post here exactly how my chokes are made......
on monday,when I will have time to measure exact dimensions
you'll be surprised how small they are
hehe
why?
steenoe said:
you know how Papa's laugh sounds?
something as muahahahahahahaaaaaaaaaaaaaaa!!!!! 😉
yup!
good ;
I hate ya! 🙄
sisyyyyyyyy.
weak
schlach
so-I'm back from little familly trip;tomorrow I'll write here some data for my chokes,even if yours will be more than enough in combination with those megazilionfarad caps
What the hell amount of RCAs . . . 
What the white fat caps . . .
What the wounded coils . . . 😀
Choky,
Thanks for the 1237.
I also see Zeny V2 in the file you attached.
Ah, my current one is somewhat different from V2, having voltage gain adjustment . . . which I am using also as a preamp driving Zen V5. Are you intested in . . . quietly? 😉
What the white fat caps . . .
What the wounded coils . . . 😀
Choky,
Thanks for the 1237.
I also see Zeny V2 in the file you attached.
Ah, my current one is somewhat different from V2, having voltage gain adjustment . . . which I am using also as a preamp driving Zen V5. Are you intested in . . . quietly? 😉
I needed 17 pairs to shine up the Threshold NS10..
Thats a lot, but looks great now that they are mounted. All new and gold shining
Steen😎
Babowana said:
Babo-my brain is on sorta red now.....can you explain that little further?
which file?
I see two file folders, named:
1 . .
2 Zastita zvucnika...
Under the first floder, all garbage except Zeny V2 😉
1 . .
2 Zastita zvucnika...
Under the first floder, all garbage except Zeny V2 😉
Babowana said:
hahahahaha or "muahahahahahahaha"..........!
it's when you open it with RAR,not decompressing it before?
right?
if -yes- than 1 .. is garbage from RAR Temp folder in YOUR comp,not mine
😎just checked in my "sent" folder-I sent you just "zastita zvucnika" rar-ed.
ok
some data for my chokes (presumably 9mH, certainly 0E2 Rdc) :
EI72 package
height of package ~30mm
entire window filled with 1,25 enameled wire
air gap ~ 0,5 mm
who sez that I'm slow
some data for my chokes (presumably 9mH, certainly 0E2 Rdc) :
EI72 package
height of package ~30mm
entire window filled with 1,25 enameled wire
air gap ~ 0,5 mm
who sez that I'm slow
J-Fet
Can anybody sell me 4 or 6 times the J109 dual Fet, required for the babbelfish, going to Germany, payable via PayPal
Can anybody sell me 4 or 6 times the J109 dual Fet, required for the babbelfish, going to Germany, payable via PayPal
Mod'y, take a look at this:http://www.diyaudio.com/forums/showthread.php?postid=1068284#post1068284
Steen🙂
Steen🙂
What about a pic of the finished amp, will that do?
The reading on the meter is DC offset at the speaker-terminals😀 Pretty nice, dont you think? I think this amp IS a bit sexy looking for a change😉 I will keep you updated with more pic's and not the least, listenig impressions if it doesnt go up in smoke, before I get a chance to connect speakers🙂 Steen😎
Attachments
- Status
- Not open for further replies.