Probably Silmics or are they upgraded to green Nichicon?
We will see how much space there is on the PCB to upgrade to e.g. MKPs…….
We will see how much space there is on the PCB to upgrade to e.g. MKPs…….
Papa clearly chose to use electrolytics (looks like Silmics or Cerafine). He not even left space for the alternative on the PCB.
I take it as a message and read: "Look i am quite happy with that.."
As usual, I have boxes of the older Silmic parts. It looks to me like the
Nichicons would be a good replacement candidate.
Nichicons would be a good replacement candidate.
@MEPER - the guys just can't contain their anticipation and in line with that, please put me on the imaginary (for now) list 😀😉
Yeh~!
My expectation is high, especially for those follower amps including SIT3. It( wa)'s Papa's birthday and I believe this is not empty promise. 😀😀😀😀
My expectation is high, especially for those follower amps including SIT3. It( wa)'s Papa's birthday and I believe this is not empty promise. 😀😀😀😀
Will there be any change of the schematic for the DIY version of the amp?
The output impedance is 221 ohm? …..would it be possible to make an e.g. 50 ohm version?
The output impedance is 221 ohm? …..would it be possible to make an e.g. 50 ohm version?
I am attempting to have focus on one thing at a time.
It's not easy.
At the moment there are about 15 things on the list.
It's not easy.
At the moment there are about 15 things on the list.
No equivalents to Papa B1 Triode 2H pure tone audio work and elegant boards
Attachments
The input and output buffers are also very different compared to the PM version. I am looking at which attenuator I may use for the amp. Never tried a shunt version where only two resistors are in the signal path on all settings…..
Attachments
