@tonno
What's means dicrete rc codes?I don't quite understand. My firmware is OK, and it should not be upgraded.
that means a seperate rc code for every input channel.
one rc code for spdif,
one rc code for i2s,
one for usb...
this would be great for users with programmable remote controls
-tonno
that means a seperate rc code for every input channel.
one rc code for spdif,
one rc code for i2s,
one for usb...
this would be great for users with programmable remote controls
-tonno
There is no external control interface. Only remote control and encoder control.
AZ1021 SK lite can meet your requestion.
Dual1121 setup kits is now under way. The first edition has just finished PCB.
View attachment 679085
@audiozen,
Is a external master oscillator used? or internal?
Non isolated serial port is accessible via on board connector?
Oh...very nice, wish I known...
How to program/learn the remote?
Press and hold the encoder before power.
@audiozen,
Do I have to remove the board to program the firmware or can it be programmed while seated in your board. Is the non-isolated serial ports accessible to program firmware?
Yes - you can use the J3 header of the dam1021. I did that - no problem.
I asking related to the dual DAM1121 setup.
I asking related to the dual DAM1121 setup.
The TTL interface is reserved. With a TTL to DB9 adapter, you can upgrade 1121 firmware.
Hi Leon, so in your opinion, I can remove the red wire 5v from usb input pcb, in this case the usb card work with 5v supplied from 5v regulator from sk board, is it right?
Another question, the 3.3v tps serves for what? Can I use this 3.3v, to supply the 3.3v soekris dam in order to replace the hottest 1117 ?
Another question, the 3.3v tps serves for what? Can I use this 3.3v, to supply the 3.3v soekris dam in order to replace the hottest 1117 ?
The TTL interface is reserved. With a TTL to DB9 adapter, you can upgrade 1121 firmware.
Leon,
Thanks,
How do you toggle between programming boards? There are 2 DB9 connectors?
- Home
- Vendor's Bazaar
- AZ OLED setup kits for Soekris dam1021/1121 control