Hi GOWA,
Where is this design from? It looks reasonable, though I'm not familiar with the woofer.
Where is this design from? It looks reasonable, though I'm not familiar with the woofer.
This is something I've been working on for a while.
http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=296-420
http://www.solen.ca/v1/
http://www.seas.no/index.php?option=com_content&task=view&id=186&Itemid=182
http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=296-420
http://www.solen.ca/v1/
http://www.seas.no/index.php?option=com_content&task=view&id=186&Itemid=182
Dimensions: 17" H x 10" W x 12.5" D.
Piano-quality black lacquer finish
.75 ft³ net internal volume
http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=302-730
Piano-quality black lacquer finish
.75 ft³ net internal volume
http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=302-730
GOWA said:
Hi,
You might want to consider another woofer, one with a higher Qts. Above .4 for sealed, below.4 for vented. For this size box (20 litres), you'll need to make sure the Vas is fairly small too - say 30-50 litres.
Example: an 8" woofer with a Qts=.35 and Vas=50 litres will give very good results in this size box vented. F3 would be ~25hz.
- Status
- Not open for further replies.