It will run either way. I'd put the feedback on the other side of the output resistors, which I gather is what Nelson is actually doing.
Grey
Grey
JEKYLL said:
I'm going to use matched 2SJ74BLs...I have a pair of 109s from Steen but those fragile little critters won't handle my supercharged output...they'll be put to good use on a straight-up AJ someday.
😀
Nelson Pass said:
jacco vermeulen said:
BTW, the question was also purely arbitrary...😉 (IOW, random stupidity on my part)
> those fragile little critters won't handle my supercharged output
What makes you think that 2SJ74 is any different ?
Patrick
What makes you think that 2SJ74 is any different ?
Patrick
Because I can easily parallel them...tell me why they're not. That's not to say you can't parallel 109s but for me who handraws my circuit boards...it's more difficult. If I design a ckt board would etch one for me?
> That's not to say you can't parallel 109s
Exactly.
> but for me who handraws my circuit boards...it's more difficult.
one can of course solder one 109 on top and 1 on the bottom of any PCB without changing the layout.
Patrick
Exactly.
> but for me who handraws my circuit boards...it's more difficult.
one can of course solder one 109 on top and 1 on the bottom of any PCB without changing the layout.
Patrick
EUVL said:
I remember that I saw that on one of numerous japanese constructions ...........
just one thing to add , regarding solo vs. dual thingies ........ besides my past troubles to find 2SJ109BL in any decent quantity , and that they not cost arm and leg ........ I have one more thing pretty important - I still need some money for da toobz .........
ya remember that they have more legs than these 3 or 7 legged fuses 😉
just my opinion and xperience .........
good enough to became universal truth
EUVL said:
if you say so ;
but not God , just Saint Alexander of Batsch .
with or without smiley ;
we must be serious all the time ?
EUVL said:
I have a hard time accepting EUVL to even think of doing that...
My requirements require more than just 2 diff pairs in parallel...please don't ask why as I know you know why.
St. Alex, please no OT!
🙂 🙂 🙂 🙂 🙂 🙂 🙂 🙂 🙂 🙂
Saint Alexandr :
why not God? Come on, don't be modest. Life is too short.
Emmanuel ("God with us")
Sorry for OT.
why not God? Come on, don't be modest. Life is too short.
Emmanuel ("God with us")
Sorry for OT.
Maybe the Saint can explain why the amp will stampede if R27 is removed instead of becoming an alternating flashlight ?
(ZM, spread 'm to let me size you)
(ZM, spread 'm to let me size you)
jacco vermeulen said:
tell me that on plain Engrish , and then I can tell ya why is C2 there
crazy dutchie talks to crazy serbie...
mess again
10-4, i missed the supercharger, the problemo with us heathens is that we look down on a schematic, never up.
As the Coën Bros before editing made Cedric "Gus Petch" say in Intolerable Cruelty : Messiah, I'm gonna nail your azz.
As the Coën Bros before editing made Cedric "Gus Petch" say in Intolerable Cruelty : Messiah, I'm gonna nail your azz.
jacco vermeulen said:
well , next time you find time between two finger poking in da dike and try to read da thread ;
it's easy drekin' poor serbie
http://www.diyaudio.com/forums/showthread.php?postid=1342059#post1342059
The Master is so busy with reading physical stuff and camouflage architecturals, he should have a master's voice to do the drawing labor.
(usually me has finger in my ear to stop the cheese flow, why you think i'm into boats)
(usually me has finger in my ear to stop the cheese flow, why you think i'm into boats)