DAC pre-order is as following:
stajo = 1
pinnocchio = 1 (Paid)
Press57 = 1
Myint67 = 1
rogerchou = 1
vitalica = 1 (Paid)
pdb = 1 (SE)
Early bird 216€ + shipping
After the 1. June 2015 236€ + shipping
Kit contains USB DAC mainboard, output shield, single ended, power cable assembly and USB Stick with Windows driver and documents
Update: Board arrives tomorrow (27.05.15). So the assembly starts tomorrow past midday
stajo = 1
pinnocchio = 1 (Paid)
Press57 = 1
Myint67 = 1
rogerchou = 1
vitalica = 1 (Paid)
pdb = 1 (SE)
Early bird 216€ + shipping
After the 1. June 2015 236€ + shipping
Kit contains USB DAC mainboard, output shield, single ended, power cable assembly and USB Stick with Windows driver and documents
Update: Board arrives tomorrow (27.05.15). So the assembly starts tomorrow past midday
DAC pre-order is as following:
stajo = 1
pinnocchio = 1 (Paid)
Press57 = 1 (Paid)
Myint67 = 1
rogerchou = 1
vitalica = 1 (Paid)
pdb = 1 (SE) (Paid)
Early bird 216€ + shipping
After the 1. June 2015 236€ + shipping
Kit contains USB DAC mainboard, output shield, single ended, power cable assembly and USB Stick with Windows driver and documents
Update: Board arrives tomorrow (27.05.15). So the assembly starts tomorrow past midday
stajo = 1
pinnocchio = 1 (Paid)
Press57 = 1 (Paid)
Myint67 = 1
rogerchou = 1
vitalica = 1 (Paid)
pdb = 1 (SE) (Paid)
Early bird 216€ + shipping
After the 1. June 2015 236€ + shipping
Kit contains USB DAC mainboard, output shield, single ended, power cable assembly and USB Stick with Windows driver and documents
Update: Board arrives tomorrow (27.05.15). So the assembly starts tomorrow past midday
Picture of the naked board ready for assembly.
BR Sonny
Looks really neat. Happy not having to solder these SMD's by hand. Maybe you could find time to shoot a couple of pics of your process / machinery for this job?
Hi Merlin2069er, Welcome to the thread 🙂 Here is what Sonny answered me in the TSSA 1.7 thread where this DAC thread started out when I asked about I2S:Neat kit, does it accept i2s input?
All the Best, Per...If somebody wants to use an I2S interface with this DAC, they need to program the DAC depending on the mode they wants to use either through SPI or I2C.. All this is part of the firmware in the xmos chip.. If i would choose to provide I2S only then i think it is waste of an good chip. DSD is only available to the DAC with prober DSD signal .. I2S does not provide it...
Last edited:
Ok, thanks. I've picked up a gustard u12 which outputs i2s.
I then picked up an diyinhk 4490 dac which accepts i2s input.
Anyways, I'm a bit too late for this dac.
I then picked up an diyinhk 4490 dac which accepts i2s input.
Anyways, I'm a bit too late for this dac.
Ahhhh ok. The Big difference here is the housekeeping around the dac. It is superior (IMO)to other on my dac.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Hi Sonny, Added my order to the list. Sent PM. Thank you.
DAC pre-order is as following:
stajo = 1
pinnocchio = 1 (Paid)
Press57 = 1 (Paid)
Myint67 = 1
rogerchou = 1
vitalica = 1 (Paid)
pdb = 1 (SE) (Paid)
burninggecko = 1 (SE)
DAC pre-order is as following:
stajo = 1
pinnocchio = 1 (Paid)
Press57 = 1 (Paid)
Myint67 = 1
rogerchou = 1
vitalica = 1 (Paid)
pdb = 1 (SE) (Paid)
burninggecko = 1 (SE)
Hi Sonny, Added my order to the list. Sent PM. Thank you.
DAC pre-order is as following:
stajo = 1 (Paid)
pinnocchio = 1 (Paid)
Press57 = 1 (Paid)
Myint67 = 1
rogerchou = 1
vitalica = 1 (Paid)
pdb = 1 (SE) (Paid)
burninggecko = 1 (SE)
DAC pre-order is as following:
stajo = 1 (Paid)
pinnocchio = 1 (Paid)
Press57 = 1 (Paid)
Myint67 = 1
rogerchou = 1
vitalica = 1 (Paid)
pdb = 1 (SE) (Paid)
burninggecko = 1 (SE)
Nice.
I see you have implemented a relay on the output board to take care of the thump created by the AK4490 when first time initialized....good thing.
Fab
I see you have implemented a relay on the output board to take care of the thump created by the AK4490 when first time initialized....good thing.
Fab
DAC pre-order is as following:
stajo = 1 (Paid)
pinnocchio = 1 (Paid)
Press57 = 1 (Paid)
Myint67 = 1
rogerchou = 1
vitalica = 1 (Paid)
pdb = 1 (SE) (Paid)
burninggecko = 1 (SE)
All Pre-orders / Early Birds until 1. june 2015 will get it to 216€ + shipping.
After 1. june 2015 the price is 236€ + shipping
stajo = 1 (Paid)
pinnocchio = 1 (Paid)
Press57 = 1 (Paid)
Myint67 = 1
rogerchou = 1
vitalica = 1 (Paid)
pdb = 1 (SE) (Paid)
burninggecko = 1 (SE)
All Pre-orders / Early Birds until 1. june 2015 will get it to 216€ + shipping.
After 1. june 2015 the price is 236€ + shipping
- Home
- Vendor's Bazaar
- AK4490 USB Dac with dsd support.