Is everyone comfortable with the bias procedure? If not I could do a quick video of the process. It’s really quite easy though.
I am comfortable with it Kevin, but considering how many of these you have sent out, then the video would be a good idea for some of the builders I think.
Here is the video showing the bias procedure. Not the best resolution, but should be good enough to help you through the process.
ACA MINI BIAS PRODEDURE VIDEO
ACA MINI BIAS PRODEDURE VIDEO
Anyone get their packages yet? When I sent the board to Franz it took 13 days until delivery. Hopefully you guys will start getting yours soon.
Hi Kevin,
My shipment shows 20 tracking updates since you posted it on the 12th Feb and the last update is dated the 22nd with it showing arrived at carrier facility somewhere in the US - does not show the state. Hopefully some of the other overseas recipients are showing more progress. So far it has been touring the states of MI, IN and IL.
Cheers
Gary.
My shipment shows 20 tracking updates since you posted it on the 12th Feb and the last update is dated the 22nd with it showing arrived at carrier facility somewhere in the US - does not show the state. Hopefully some of the other overseas recipients are showing more progress. So far it has been touring the states of MI, IN and IL.
Cheers
Gary.
I received the package for Sweden today. The envelope was damaged, there was a rip almost half the short end.
Fortunately no transistors were missing. The boards have sharp edges which damage the envelope in shipping.
Have to order the other components as I dont want to be a board horder...
Many thanks to Kevin and Nelson and all others making this possible!
Fortunately no transistors were missing. The boards have sharp edges which damage the envelope in shipping.
Have to order the other components as I dont want to be a board horder...
Many thanks to Kevin and Nelson and all others making this possible!
You are lucky, but I suppose Sweden is a a lot closer to the US than me here in Australia. I have all the parts, so will be ready to solder as soon as the pcbs and Harris Mosfets arrive.
Has any one else outside the US received theirs yet?
Has any one else outside the US received theirs yet?
Historically, Express Mail from the U.S.A. takes 10-14 days for me. I checked my P.O. Box this A.M. and not there yet but hopefully next week.
Andrew
Andrew
Tracking says the U.K. bound boards have made it to London. Just need to be handed off to Royal Mail and I expect we’ll have them this week
Nothing here in Toronto yet. Where are folks finding the tracking numbers? I don't recall receiving a shipping notice.
cheers and thanks, Derek
cheers and thanks, Derek
I got an automated email from Stamps.com on the 14th Feb when Kevin posted them out. It has the tracking link - mine is still sitting in the US.
Thanks. Hmm. I searched my various email folders and have nothing from Stamps.com - other than older notices for different packages. Hopefully just a glitch.
Kevin,
Soaking up the Mexico sun, so will not know if packages are delivered until I return in mid April. Our friends are picking up our mail and looking after our house while we are gone. Friends had mentioned a package with electronics arrived with a damaged box, but the components were fine. I believe this was the speaker protection pcbs I ordered before the ACA mini boards. Will let you know if I hear anything.
Regards,
MM
Soaking up the Mexico sun, so will not know if packages are delivered until I return in mid April. Our friends are picking up our mail and looking after our house while we are gone. Friends had mentioned a package with electronics arrived with a damaged box, but the components were fine. I believe this was the speaker protection pcbs I ordered before the ACA mini boards. Will let you know if I hear anything.
Regards,
MM