About possible Babelfish J interest

[2 picoDumbs]

Hahhaha
Zen Mod to Papa.
"All it's gonna take for me to stop annoying the hell out you Papa, is for you to sign these adoption papers"

Looks like Papa hasn't signed the adoption papers yet.


If Papa gets cross with me I'll just say I've joined forces with Zen Mod.

Hahaha

 

[Zen Mod]

you don't want that

I'm in Eternal Disgrace

 

[indra1]

...Looks like Papa hasn't signed the adoption papers yet....

Not going to happen, he appointed others already.

My heirs want to know:....

 

[Zen Mod]

Off Topic Mafia ......... hitting again

 

[Zen Mod]

should I post this in dedicated thread ?

another shameless Babelfishing ?

 

[Dennis Hui]

Very nice! Please do.

 

[Zen Mod]

will do , as soon I finish dedicated blog post , so no need to think/write/organize twice .........

 

[Coasttocoast]

two attachments for vitalica , one attachment for coasttocoast

hope I didn't made a mess (again)

Thanks for the clarification!

One question, does R11 need to be 1 watt?

 

[Zen Mod]

check by yourself

P=I^2 x R

P= 20mA^2 x 470 = 188mW

or

P=U x I = 9V4 x 20mA = 188mW

damn ........ which one is right ?

🙂

regular (and most regular ones are 600mW) metal film is more than OK

 

[carsten.witt]

Hi ZM,

first, is your babel fish logo free for use and if yes can you send it to me please (as some CAD file)?

Another question to the heatsinks better for the IRFP150 .... can they mount on separate heatsinks? I ask because I "found" an forgotten case like this one in my "Bastelbude". 🙄 😱 So two sinks for left and right, one per transistor?
https://www.audiophonics.fr/12662-thickbox_default/hifi-2000-heatsink-case-3u-400mm-front-10mm-silver.jpg

Thanks!

 

[Zen Mod]

no real problem if sinks are separate , tested , proven , forgotten

link to CDR file of Babelfish J : Dropbox - LOGO_BABEL_J_Zen_Mod.cdr


you can drill 1mm hole in eye position, then counter-sunk it from back , and place nice LED ........

 

[carsten.witt]

Morning, that was what I want to hear, thanks for ElFishi ;-)

 

[carsten.witt]

Dear ZM,
mmh, all my programs say the cdr file ist defective (on my Mac). Can you provide it me again and / or if possible as hpgl, thanks!

 

[Zen Mod]

will try later , on PC where I have Corel

 

[Zen Mod]

can't export for Mac

PDF is not working for you , or ?

 

[Russellc]

Where is pricing info on Babblefish, not finding a group buy?

Russellc

 

[Zen Mod]

Carsten, will try later this evening with newer Corel

Russel , first post of this thread

 

[Russellc]

Silly me, missing obvious place.😀

 

[Russellc]

I see it specifies "Prescribed outputs need not be matched" a little while back we had PM exchange regarding multiple outputs, assuming:

1. Those would need matched

2. items from same tube in multiple unit tubes fairly close generally speaking?

Finally, 2 more questions:

1. PM also discussed "piggy backing" jfets in multiple output version, if kit ordered can this be accommodated with necessary matching? as I recall, maybe different cascode devices also be negotiated?

2. were "daughter boards" ever done to allow easy multiple outputs for klutsey builders like me?

Thanks,



Russellc

 

[Zen Mod]

1. yup

2.pretty much .... though you still need to match them

finally 1. yup , recently I sent quantity for piggy backing , entire communication visible page back or so

finally 2. yup , there are Daughter boards , read backwards and you'll see some appropriate sketches ......