good news,
on semi carmona & calamba
ON Semiconductor: Carmona, Philippines
ON Semiconductor: Calamba Laguna, Philippines
on semi carmona & calamba
ON Semiconductor: Carmona, Philippines
ON Semiconductor: Calamba Laguna, Philippines
irvynejay,
see ampslab,
reliable prices compare newport 60p/pc
2SC5200 2SA1943 Toshiba Audio Power Transistors - Buy Online @ AmpsLab
see ampslab,
reliable prices compare newport 60p/pc
2SC5200 2SA1943 Toshiba Audio Power Transistors - Buy Online @ AmpsLab
philippine branch,
Philippines
16th Floor, Tower 2
Insular Life Corp. Center
Commerce Ave Corner Corporate Ave.
Filinvest Corp. City
Muntinlupa City
Alabang
1781
Tel: +63 2 771 1681
Fax: +63 2 771 2301
Philippines
16th Floor, Tower 2
Insular Life Corp. Center
Commerce Ave Corner Corporate Ave.
Filinvest Corp. City
Muntinlupa City
Alabang
1781
Tel: +63 2 771 1681
Fax: +63 2 771 2301
for my indian diy'r friend,
genuine 1943/5200
from fairchild
India Bangalore
Future Electronics Inc.
Sigma Soft Tech Park
Beta Block 6th Floor
#7 Whitefield Main Road
Opp:Varthur Lake
Bangalore
560 066
Tel: +91 80 4331 8100
Fax: +91 80 4331 8101
Mumbai
Future Electronics Inc.
(Distribution) Pte Ltd
No. 710/711, 7th Floor Gateway Plaza
Hiranandani Garden
Powai
Mumbai
400076
Tel: +91 22 2570 1758
Fax: +91 22 6693 4963
New Delhi
Future Electronics Inc.
(Distribution) Pte Ltd
No. 511, 5th Floor
No 38 Ansal Tower Nehru Place
New Delhi
110019
Tel: +91 11 2646 1414
Fax: +91 11 5173 0205
Shivajinagar, Pune
3rd Floor, "21-Harmony"
2nd Lane, Deodhar Road
Opp PYC Deccan Gymkhana
Shivajinagar
Pune
411 004
Tel: +91 20 4122 7107
Fax:
genuine 1943/5200
from fairchild
India Bangalore
Future Electronics Inc.
Sigma Soft Tech Park
Beta Block 6th Floor
#7 Whitefield Main Road
Opp:Varthur Lake
Bangalore
560 066
Tel: +91 80 4331 8100
Fax: +91 80 4331 8101
Mumbai
Future Electronics Inc.
(Distribution) Pte Ltd
No. 710/711, 7th Floor Gateway Plaza
Hiranandani Garden
Powai
Mumbai
400076
Tel: +91 22 2570 1758
Fax: +91 22 6693 4963
New Delhi
Future Electronics Inc.
(Distribution) Pte Ltd
No. 511, 5th Floor
No 38 Ansal Tower Nehru Place
New Delhi
110019
Tel: +91 11 2646 1414
Fax: +91 11 5173 0205
Shivajinagar, Pune
3rd Floor, "21-Harmony"
2nd Lane, Deodhar Road
Opp PYC Deccan Gymkhana
Shivajinagar
Pune
411 004
Tel: +91 20 4122 7107
Fax:
2sc5200/2sa1943
so far this is the cheapest i have found,
cheaper than future electronics
future electronics ask 60usd for shipping
while digi key ask for about 40usd
so 8 pcs output plus shipping will cost almost 60.64usd
2668philippine money
so far this is the cheapest i have found,
cheaper than future electronics
future electronics ask 60usd for shipping
while digi key ask for about 40usd
so 8 pcs output plus shipping will cost almost 60.64usd
2668philippine money
have a Technical question to H900 and B500 for APEX
between Driver MJE15032 and 15033 is only R27 with 22R and not connected with output, why ? a lot of amp schematics have it,
1. Is it possibile to add 2 pcs. 100R between MJE15032 and 15033 Emitter and connect with output like many other amplifier designs in complementary output stage have ? what happenend if I will do it in your design ?
2. I want add 220R from MJE15032 Emitter to output and 100 R from MJE15033 Emitter to output for driving Quasi complementary output Stage with BJT or MOSFETS
Can this work with H900 or B500 ?
3. I missing 100 R to base from MJE15032 and 15033 Driver, why dont you have it in your design ?
a lot of schematics have 100 R to base from driver or is it redundantly in your design ?
between Driver MJE15032 and 15033 is only R27 with 22R and not connected with output, why ? a lot of amp schematics have it,
1. Is it possibile to add 2 pcs. 100R between MJE15032 and 15033 Emitter and connect with output like many other amplifier designs in complementary output stage have ? what happenend if I will do it in your design ?
2. I want add 220R from MJE15032 Emitter to output and 100 R from MJE15033 Emitter to output for driving Quasi complementary output Stage with BJT or MOSFETS
Can this work with H900 or B500 ?
3. I missing 100 R to base from MJE15032 and 15033 Driver, why dont you have it in your design ?
a lot of schematics have 100 R to base from driver or is it redundantly in your design ?
Last edited:
I have just completed a double side pcb of 1.5kw High-End Class-H...........
I want to share it on the forums for DIY.😉
I want to share it on the forums for DIY.😉
I have just completed a double side pcb of 1.5kw High-End Class-H...........
I want to share it on the forums for DIY.😉
do it, can you send schematic ?
I have just completed a double side pcb of 1.5kw High-End Class-H...........
I want to share it on the forums for DIY.😉
Don't try to hijack this thread cuz it's not polite. Open a new thread and let's see what you have there m8. 🙂
Don't try to hijack this thread cuz it's not polite. Open a new thread and let's see what you have there m8. 🙂
No one is hijacking this thread, will start a new thread only..........🙂
hi workhorse
greetings NEW YEAR couldnt have started better thanks for
sharing your creation and knowledge
thanking you
andrew lebon
greetings NEW YEAR couldnt have started better thanks for
sharing your creation and knowledge
thanking you
andrew lebon
waiting 4 ur amp workhorse
regards
sekhar
http://www.diyaudio.com/forums/solid-state/180638-diy-1-5kw-bipolar-class-h.html
- Home
- Amplifiers
- Solid State
- 900W H-class PA Amp with Limiter