sekhar
where is your final pcb,
maybe other builder want to try
pcb and component lay out please
where is your final pcb,
maybe other builder want to try
pcb and component lay out please
Use pcb from B500 for B250 or I can suggest you to build HV350
http://www.diyaudio.com/forums/solid-state/162043-mosfet-amplifier-irfp240-irfp9240-35.html
Regards
Dear sir, I will use B500 pcb, and then use 3 pairs of 5200/1943. Is there any modification to the pcb and its components?
Sorry to many question, I am newbie...
this pcb is ok..
nothing is happening my dear i use 5200-1943 as drive because i have no 15032-33.
so u can use 5200-1943 its simple.
nd there is a mistake in pcb i show as a blue line ..make it and enjoy..😀😀
thank u
what is happening here?
please somebody help
5200/1943 as driver
nothing is happening my dear i use 5200-1943 as drive because i have no 15032-33.
so u can use 5200-1943 its simple.
nd there is a mistake in pcb i show as a blue line ..make it and enjoy..😀😀
thank u
Attachments
nothing is happening my dear i use 5200-1943 as drive because i have no 15032-33.
so u can use 5200-1943 its simple.
nd there is a mistake in pcb i show as a blue line ..make it and enjoy..😀😀
thank u
THANKS ALOT AMAN
guys just returned from office ............. as it is a new job work pressure is high ........ thanks for ur patience .......
progress report for driver........
regards
sekhar
@sekhar this would be the b500 driver board?
which is better hv23/hv25/hv350/b500/apex550w
There is no better amp, just better for you. I suggest http://www.diyaudio.com/forums/solid-state/167394-quasi-amplifier-beginners.html
Regards
hi apexaudio
greetings do you have any clipping indicator schematic to share
for your h900 amplifier so we can have visual indication of clipping please can you help out
thanking you
andrew lebon
greetings do you have any clipping indicator schematic to share
for your h900 amplifier so we can have visual indication of clipping please can you help out
thanking you
andrew lebon
hi apexaudio
greetings do you have any clipping indicator schematic to share
for your h900 amplifier so we can have visual indication of clipping please can you help out
thanking you
andrew lebon
Add LED in series with LED integrited in NSL32, and you have clip/limit indication.
Regards
Attachments
which is best 5200/1943 or irfp9240/irfp240?
You can build good amplifier with BJTs and with MOSFETs
hi
read from the top. 😉
anybody have BJTs and with MOSFETs pcbs with aroung 500w pls post.
read from the top. 😉
- Home
- Amplifiers
- Solid State
- 500W PA amplifier with Limiter