These woofers were custom made for a project that never made it to production and must go. They have the following T/S specs. All are new and unused in their original unopened boxes.
My loss is your gain. I would like $35 each plus shipping. These are not "subwoofers" per se. They were designed for use in a three-way system up to 800Hz are are quite efficient for that. They are good down to around 35Hz if you crunch the numbers in your favorite simulator. I have to work-out the UPS shipping costs and get the account ready. They will be leaving from zip 94805. I should have my act together early this next week.
Please take a few for Christmas gifts to your fellow DIYer.
Code:
Re: 6.89 Ω
Le: 1.23 mH
Sd: 506.71 cm²
Vas: 165.55 Liters (5.85 ft³)
Fs: 29.94 Hz
Xmax: 9.8 mm
Pe: 225W (estimated)
Qms: 9.21
Qes: 0.44
Qts: 0.42
Bl: 13.53 T·m
Mms: 61.6 g
Mmd: 55.1 g
Cms: 4.591E-4 m/N
Rms: 1.2568 N·s/m
EBP: 68.7 (both sealed and ported are usable)
My loss is your gain. I would like $35 each plus shipping. These are not "subwoofers" per se. They were designed for use in a three-way system up to 800Hz are are quite efficient for that. They are good down to around 35Hz if you crunch the numbers in your favorite simulator. I have to work-out the UPS shipping costs and get the account ready. They will be leaving from zip 94805. I should have my act together early this next week.
Please take a few for Christmas gifts to your fellow DIYer.
Attachments
That changes things.
I'll snag 4 if you don't mind shipping to Canada and the cost of shipping is within reason.
I don't mind at all... I'll get my act together Monday regarding shipping issues. Payment will be to paypal.
I will take 2 or 4, depending on shipping cost
jim
PM me your address for a total cost with shipping. Assuming Pittsburgh for 15201, 4 would cost 97.68+140=237.68 and two would be 48.84+70=118.84.
Shipping weight each is 15.45 lbs (14"x14"x7") and being sent from zip 94805
I don't have any infinite baffle ones (or any others) sorry. I could get you more T/S params generated by MLSSA if you really want it.
I'd have to make a new jig for the test wall and honestly don't feel like doing the work.
I'm perfectly okay with someone buying and sending to you. But international shipping can be a bit tricky as I'm learning. Any customs taxes will be payable by the receiver on delivery. I don't mind filling out some forms on my end.
I won't send to Italy as "lost" items are the norm.
I won't send to Italy as "lost" items are the norm.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.