Turns out the adapter is aluminum, so no welding steel supports to that.
Went back to the original support rods I had planned for it.
Went back to the original support rods I had planned for it.
Last edited:
Got the midbass complete! Did all the 4c wiring, just have to tackle the 8 conductor wiring now and the signal wiring in the amp rack. Then the power wire and she should be ready to fire up!
Last edited:
Crap I forgot to check the angle for you. I forget what it is. I'll check next time I'm there.
Midbass on top of the sub.
8c neutrik in from the sub, 4c neutrik out to the top.
Midbass on top of the sub.
8c neutrik in from the sub, 4c neutrik out to the top.
This was fun. Not lol. I drilled out all the tabs so I could insert the 13awg wire then soldered them in place.
Two 8c neutrik into the sub. Well one in one out.
Two 8c neutrik into the sub. Well one in one out.
Thanks guys! Finally put the last few hours in on it, and got it fired up. Tons of reflections and cancelation in my small basement, but I dragged the stuff outside and got a chance to have a quick listen. Not even loud and my neighbor came over and put his two cents in, so I shut it down and packed it up. Gotta go to an open space and try it out and tune the thing. But overall I'm pleased with what I heard for those few quick minutes I had it on! 😀
Switched around the crossover settings, got a chance to play with the PEQ slightly. It sounds good from what I've tried thus far. Will be using it for a pool party outdoors this weekend, can't wait to hear its potential! 🙂
Wat to go...
Got to say, pool party with your own PA rig...Way to go, I am soooo jealous!!
Cheers
Derek.
Got to say, pool party with your own PA rig...Way to go, I am soooo jealous!!
Cheers
Derek.
After multiple parties fell through, we finally got the chance to let this system rip last night.
Set up in the basement of a bar, called Gallery Bar in NYC. Power supply was a nightmare, they originally gave me and the DJ's one 18awg extension cord to run EVERYTHING off of. I laughed and searched the place for outlets making sure they weren't on the same breaker.
After set up, we fired up the system and all the people that worked upstairs came down and said "now THAT'S what we need in here!"
A little while after the DJ came on they came down and told us to turn the bass down, we found out later that was due to a picture falling off the wall upstairs lol
Anyway everyone was impressed with the system, it just keep going with awesome clarity and quality, with SPL to match.
Very well balanced and loud, yet not annoying and harsh. I was very pleased for the systems first time out with little to no tuning on it.
Set up in the basement of a bar, called Gallery Bar in NYC. Power supply was a nightmare, they originally gave me and the DJ's one 18awg extension cord to run EVERYTHING off of. I laughed and searched the place for outlets making sure they weren't on the same breaker.
After set up, we fired up the system and all the people that worked upstairs came down and said "now THAT'S what we need in here!"
A little while after the DJ came on they came down and told us to turn the bass down, we found out later that was due to a picture falling off the wall upstairs lol
Anyway everyone was impressed with the system, it just keep going with awesome clarity and quality, with SPL to match.
Very well balanced and loud, yet not annoying and harsh. I was very pleased for the systems first time out with little to no tuning on it.
- Status
- Not open for further replies.