haha its just i have to buy all the parts and i was piecing the boards the other day and they were reaching around $100 and with the transformer that's another $70 let alone the case im eying that is going to cost $270. 😀
haha its just i have to buy all the parts and i was piecing the boards the other day and they were reaching around $100 and with the transformer that's another $70 let alone the case im eying that is going to cost $270. 😀
You could assemble a classic that will last a long time or do a quickie 😀
If the case is worth $270, whats inside should be worth at least the same 😀
So your amp could be worth ~$1000.
A break down
$20 * 20 hours = $400
Parts = $540
Friend come in listens and loves it , wants it = $ ?
So your amp could be worth ~$1000.
A break down
$20 * 20 hours = $400
Parts = $540
Friend come in listens and loves it , wants it = $ ?
Last edited:
so here is my plan im going to go.
Transformer
AN-6232
Bridge Rectifier
GBPC3510 Fairchild Semiconductor | Mouser
Power Caps
380LX682M063K042 Cornell Dubilier | Mouser x6
out to the pair of boards with the MJH6284
the case im looking at is this
http://www.ebay.com/itm/120963405821?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648
Transformer
AN-6232
Bridge Rectifier
GBPC3510 Fairchild Semiconductor | Mouser
Power Caps
380LX682M063K042 Cornell Dubilier | Mouser x6
out to the pair of boards with the MJH6284
the case im looking at is this
http://www.ebay.com/itm/120963405821?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648
so here is my plan im going to go.
Transformer
AN-6232
Bridge Rectifier
GBPC3510 Fairchild Semiconductor | Mouser
Power Caps
380LX682M063K042 Cornell Dubilier | Mouser x6
out to the pair of boards with the MJH6284
the case im looking at is this
FS 430 Full Aluminum Power Amp Enclosure Case External Size 430mm 150mm 314mm | eBay
You've nailed it, don't forget incoming ac line filter 😉
this amp was in exit just TIP142
do not have TIP147?
can this work in 2 ohm load?
Thank you. You just need TIP142. Will work in 2 Ohms assuming this is nominal. Keep us up to date. Enjoy your build.
Decided to bump this a bit so that members can share their progress pics and exchange stories round the camp fire about 1DIFFQC first notes
Last edited:
Hmmm--- Not happened alot. Just picked up a old Nad 216thx amp. Will take out the internals and populate some 1diffqc boards and make them fit into the chassis.. Well that is the plan.
Well i got my transformer and all the power supply boards but since my truck is almost dieing on me and holidays coming up this is taking the back burner for the time being.
Thanks for the updates, hope 1DIFFQC is already whispering sweet honey drops into your ears 🙂
Hmmm--- Not happened alot. Just picked up a old Nad 216thx amp. Will take out the internals and populate some 1diffqc boards and make them fit into the chassis.. Well that is the plan.
Well i got my transformer and all the power supply boards but since my truck is almost dieing on me and holidays coming up this is taking the back burner for the time being.
Hey Liliya looking forward for your usually extensive and exciting writeup of your findings.
Many a member also promised me pictures and a write up of their research findings 😉
kind regards,
Harrison.
Many a member also promised me pictures and a write up of their research findings 😉
kind regards,
Harrison.
Harrison,
I have to admit that my boards are sitting 98% completed and I am still waiting to get to where I have a pile of transformers so I don't have to purchase more. I will be getting there soon and will complete the first project and then start on the other set of boards you sent out, the simple model amplifiers.
Best wishes,
Steven
I have to admit that my boards are sitting 98% completed and I am still waiting to get to where I have a pile of transformers so I don't have to purchase more. I will be getting there soon and will complete the first project and then start on the other set of boards you sent out, the simple model amplifiers.
Best wishes,
Steven
Hey Harrison
Yes im one of those guilty dudes!
I have managed to fix my new ( old ) scope but now .......all my gear is locked up in my now ex wifes garage!!!........hoping to get it all back soon.
P.S now have a couple of better sized transformers for this puppy 🙂
Yes im one of those guilty dudes!
I have managed to fix my new ( old ) scope but now .......all my gear is locked up in my now ex wifes garage!!!........hoping to get it all back soon.
P.S now have a couple of better sized transformers for this puppy 🙂
Harrison,
I have to admit that my boards are sitting 98% completed and I am still waiting to get to where I have a pile of transformers so I don't have to purchase more. I will be getting there soon and will complete the first project and then start on the other set of boards you sent out, the simple model amplifiers.
Best wishes,
Steven
Looking forward. Thanks for the update 😉
kind regards,
Harrison.
Hey Harrison
Yes im one of those guilty dudes!
I have managed to fix my new ( old ) scope but now .......all my gear is locked up in my now ex wifes garage!!!........hoping to get it all back soon.
P.S now have a couple of better sized transformers for this puppy 🙂
Looking Forward 😉 . Thanks for the update. Call her dear and give her a foot rub , you'll get everything back 😀
kind regards,
Harrison.
Last edited:
Hi members,
Looking forward to your feedback. The target was roughly 30,000 reviews. The feedback will include noise which is useful such as mood, weather, humidity, magnetic pull, orientation from true north etc
kind regards,
Harrison.
Looking forward to your feedback. The target was roughly 30,000 reviews. The feedback will include noise which is useful such as mood, weather, humidity, magnetic pull, orientation from true north etc

kind regards,
Harrison.
Last edited:
Welcome Pinnocchio,
Thanks for joining us and for your continued support Pinnocchio 😀. Keep the thread up to date with your build progress.😉
kind regards,
Harrison.
Thanks for joining us and for your continued support Pinnocchio 😀. Keep the thread up to date with your build progress.😉
kind regards,
Harrison.
Toni here they are 🙂
kind regards,
Harrison.
Dear Harrison,
thank you for providing asc files for testing. On opening it there are many missing symbols. Are you able to provide it too (except Cordell-Models.txt which are to be downloaded from Bob's homepage)?
Thx, Toni
- Home
- Amplifiers
- Solid State
- 1DIFFQC amplifier