When you begin to advertise their forums, we in Macedonia have their forum: www.elektronika-mk.net/!!:wave2::up::sarge:
cheers
It's not welcome here to bring arguments from other forums. If problems of that kind arise here also (like unauthorized copying or overt fuss between participants) membership will be terminated. The
emoticon is reserved for the DiyaA author when making interventions, please don't use it in posts again. Moderation. 
OK !!It's not welcome here to bring arguments from other forums. If problems of that kind arise here also (like unauthorized copying or overt fuss between participants) membership will be terminated. The
P.S.
But it should be true for others here on the forum. Here for example, for 44250!!?
Thanks
The warning applies to all.
http://www.diyaudio.com/forums/site-announcements/167561-diyaudio-rules.html
''Some members are also forum moderators. You will always see the
or icon when moderators are officially posting warnings or directions which will have consequences if not followed.''
2 days bin time for not following moderation directive about the icon.
Another 3 days bin time for discussing moderation directive online. Directives are to be followed, not argued. Watch your step in the future. Good luck.
http://www.diyaudio.com/forums/site-announcements/167561-diyaudio-rules.html
''Some members are also forum moderators. You will always see the
or icon when moderators are officially posting warnings or directions which will have consequences if not followed.''2 days bin time for not following moderation directive about the
icon.Another 3 days bin time for discussing moderation directive online. Directives are to be followed, not argued. Watch your step in the future. Good luck.
Hi Mr "!"
Here's a picture-made amplifier!!
And here's the schematic (Figure 2.)!
thanks and cheers!
Hi Radio, can you please give me a pcb layout in pdf file? Thanks
Yet we were wrong, greeting ZX-0 or Slavko.still .........use other people to work for you???
Learn to use drawing program for pcb.
At every forums same situation,I have mint amplifier,I made it.Works great, beautiful sound,Can you make more pcb of the same.to measure THD with "clio"??
I do not want to go in what has been said about,prominent members of this forum.When we went to diyaudio.Some of them are my heroes(Pass,Imlzin,Bora etc).All you can read the above mentioned forums.
And this forum I love,Unfortunately my English writing is suffering.But learn and do not bother other people and they learn something.
Greeting to all🙂
Of course, apologize for my English.
Learn to use drawing program for pcb.
At every forums same situation,I have mint amplifier,I made it.Works great, beautiful sound,Can you make more pcb of the same.to measure THD with "clio"??
I do not want to go in what has been said about,prominent members of this forum.When we went to diyaudio.Some of them are my heroes(Pass,Imlzin,Bora etc).All you can read the above mentioned forums.
And this forum I love,Unfortunately my English writing is suffering.But learn and do not bother other people and they learn something.
Greeting to all🙂
Of course, apologize for my English.
very nice amp.!
is that a quasi amplifier?with overload protection!WOW!
Hi Mr "!"
Here's a picture-made amplifier!!
And here's the schematic (Figure 2.)!
thanks and cheers!
is that a quasi amplifier?with overload protection!WOW!
yeap !!!!
while the lower VI limiter senses from a resistor placed in the emmiter of the output transitor which is conected to the power supply ( Quasi complementary ) and "shunts " drive to rail if needed (!!!! )
never seen that before ... both sense point and shunt point ( forgot to mention that the limmiter "shunts" the outputs and not the drivers also wrong from what i know )
i presume that this is totally wrong but if i make mistake please correct me
sakis
while the lower VI limiter senses from a resistor placed in the emmiter of the output transitor which is conected to the power supply ( Quasi complementary ) and "shunts " drive to rail if needed (!!!! )
never seen that before ... both sense point and shunt point ( forgot to mention that the limmiter "shunts" the outputs and not the drivers also wrong from what i know )
i presume that this is totally wrong but if i make mistake please correct me
sakis
Last edited:
Hi ingenieus!
Come and I to turn on, very interesting schematic intensified.
If you give more description of this seed, and I am a huge percent of hobbyists we will work to making this amplifier,... then I will give feedback as sound adds.
Regards
- Status
- Not open for further replies.