Hi all, thanks to Patrick I am starting GB for Limited Edition SMD Folded Cascode CEN IV from XEN audio.
LINK to thread for technical discussion.
This GB is limited to 20 pairs and will come as a KIT with all matched transistors, capacitors and resistors needed for assembly.
When we reach 20 pairs I will send requests for payment and start ordering transistors for matching.
After matching transistors I will order the rest of needed components and pack everything at least as good as the last GB I did, so you will have no trouble when assembling PCBs.
Between all the ordering, shipping times and matching 500+ transistors it will take a while, so I will report my progress as often as needed, but I hope by the end of year all should receive their KITs...
Price:
I will update SPREADSHEET, just leave your username here and PM me your contact information (paypal email, and shipping details)
LINK to thread for technical discussion.
This GB is limited to 20 pairs and will come as a KIT with all matched transistors, capacitors and resistors needed for assembly.
When we reach 20 pairs I will send requests for payment and start ordering transistors for matching.
After matching transistors I will order the rest of needed components and pack everything at least as good as the last GB I did, so you will have no trouble when assembling PCBs.
Between all the ordering, shipping times and matching 500+ transistors it will take a while, so I will report my progress as often as needed, but I hope by the end of year all should receive their KITs...
Price:
- 1 full KIT 80€ (pair)
- shipping and packaging EU - 12€, World - 17€
I will update SPREADSHEET, just leave your username here and PM me your contact information (paypal email, and shipping details)
Attachments
A huge effort to take on matching some 500 devices of different types (JFETs, MOSFETs and BJT).
Each type requires their own matching setup.
And then the sorting and packing afterwards.
I can tell you it is really a mammoth tasks.
A remark on the Power Supply
The protos that Fran auditioned are using separate +/-15V power supplies for best performance.
In principle, one can adapt the circuit to use +/-12V rails, at somewhat higher distortion.
It should be decided upfront whether 12V or 15V, but it should apply to all 20 pairs.
(Component values are different.)
Patrick
Each type requires their own matching setup.
And then the sorting and packing afterwards.
I can tell you it is really a mammoth tasks.
A remark on the Power Supply
The protos that Fran auditioned are using separate +/-15V power supplies for best performance.
In principle, one can adapt the circuit to use +/-12V rails, at somewhat higher distortion.
It should be decided upfront whether 12V or 15V, but it should apply to all 20 pairs.
(Component values are different.)
Patrick
Please put me down for one.Ripster 1
Malvin 1
Awh 1
Intojazz 1
Tamra 1
Ripster 1
Malvin 1
Awh 1
Intojazz 1
Tamra 1
xraylaser 1
BDL 1
slartibartfasst 1
vuthanh6 1
wealas 2
Malvin 1
Awh 1
Intojazz 1
Tamra 1
xraylaser 1
BDL 1
slartibartfasst 1
vuthanh6 1
wealas 2
I'm enjoying a set in my main system from the first GB that Ripster and Patrick were kind enough to put together. You will not be disappointed.
Ripster 1
Malvin 1
Awh 1
Intojazz 1
Tamra 1
xraylaser 1
BDL 1
slartibartfasst 1
vuthanh6 1
wealas 2
happylistening 2
Malvin 1
Awh 1
Intojazz 1
Tamra 1
xraylaser 1
BDL 1
slartibartfasst 1
vuthanh6 1
wealas 2
happylistening 2
Ripster 1
Malvin 1
Awh 1
Intojazz 1
Tamra 1
xraylaser 1
BDL 1
slartibartfasst 1
vuthanh6 1
wealas 2
happylistening 2
Arthur 1
Malvin 1
Awh 1
Intojazz 1
Tamra 1
xraylaser 1
BDL 1
slartibartfasst 1
vuthanh6 1
wealas 2
happylistening 2
Arthur 1
Yosyos 1Ripster 1
Malvin 1
Awh 1
Intojazz 1
Tamra 1
xraylaser 1
BDL 1
slartibartfasst 1
vuthanh6 1
wealas 2
happylistening 2
Arthur 1
Thanks
- Home
- Group Buys
- GB for Limited Edition SMD Folded Cascode CEN IV