I almost give up on AudioNirvana Classic 8 in BR cabinet 2.8 style. listening to the album of "Avenged Sevenfold - Hail to the King" is so painful to my ear. while listening this album on my Open Baffle or Senn HD650 is very enjoyable
but last week i found a post which i did not save the link but the picture layout, trace AN response curve and implement it on XSim. and the result is very good, it increase bass and reduce mid high spl, more balance sound.
i tested the circuit on the floor and just finished solder it ptp and plywood. really enjoyable AN now
but last week i found a post which i did not save the link but the picture layout, trace AN response curve and implement it on XSim. and the result is very good, it increase bass and reduce mid high spl, more balance sound.
i tested the circuit on the floor and just finished solder it ptp and plywood. really enjoyable AN now
Attachments
Nice.
After adding a reverse ckt compared to yours (just a 6db cut below 5khz to compensate for the driver dropping db past 5khz), made a big difference.
After adding a reverse ckt compared to yours (just a 6db cut below 5khz to compensate for the driver dropping db past 5khz), made a big difference.
They are very attractive speakers. Have you got used to the new drivers?
I have recently got into FR drivers and have the Hemp 8FR BR and now a SEAS Exotic IB. Both are great to listen to. I did not know of the Silver 8 - that looks very interesting but I have seen no real data on it.
My MJK 18" H frame OBs
My MJK 18" H frame with Pluvia 7 on a reinforced 20 X 20" OB. (The other speaker is similar, only mirror image)
Since I listen at much lesser than concert levels, I run the Pluvia's FR and cross the H frame around 100 Hz. Standup bass sounds natural and those two 18"s motion are barely detectable to a finger touch on the cone. I imagine the VC is in a pretty linear portion of the magnet gap at a micrometer level displacement! Wanna talk effortless?
I just love the FR OB sound, with these built I'll probably never have an enclosed box type speaker again. I've a number of drivers to play with on the OB panel; should keep me busy for a while.
I know they're big for a bedroom; I sold them to my wife on the caveat that we could put a board atop the two H frames and use the assembly for a table to start her plants in front of the window. That positioning will wreck the bass, but I can live with it for a few months... The OBs will sit atop a couple of oak stools.
All in all quite pleased with the sound. BIB!
My MJK 18" H frame with Pluvia 7 on a reinforced 20 X 20" OB. (The other speaker is similar, only mirror image)
Since I listen at much lesser than concert levels, I run the Pluvia's FR and cross the H frame around 100 Hz. Standup bass sounds natural and those two 18"s motion are barely detectable to a finger touch on the cone. I imagine the VC is in a pretty linear portion of the magnet gap at a micrometer level displacement! Wanna talk effortless?
I just love the FR OB sound, with these built I'll probably never have an enclosed box type speaker again. I've a number of drivers to play with on the OB panel; should keep me busy for a while.
I know they're big for a bedroom; I sold them to my wife on the caveat that we could put a board atop the two H frames and use the assembly for a table to start her plants in front of the window. That positioning will wreck the bass, but I can live with it for a few months... The OBs will sit atop a couple of oak stools.
All in all quite pleased with the sound. BIB!
Attachments
Last edited:
Bchiu2000,
Nice looking TABAQ Large.
jjasniew,
That looks like a fun speaker to listen to - enjoy!
Nice looking TABAQ Large.
jjasniew,
That looks like a fun speaker to listen to - enjoy!
Last edited:
i recently acquired these pensils with alpair 10p on them. i believe the builder is also a member here. when i got them the paper have been heavily stained so dyed them with diluted india ink. i also made the grills to protect them from cone pokers and the base with spikes to bring them to my preferred height.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Nice job on th econe colour. Depending on how done, it could improve performance somewhat.
dave
dave
thank you for fixing the photos Dave =) i couldnt hear a difference honestly. but im pretty pleased with how they turned out cosmetically. I Cant believe how good sounding these drivers are. very balance sounding drivers and with Pensils the bass is more than adequate =) @Scottmoose your design rocks!
The colors and lighting in that room are mighty attractive. I am curious though, there doesn't appear to be much damping to be seen. How do you manage reflection. Don't know that an overstuffed couch alone would overcome the advantage of those bare walls and tile floor.
enio nery,
Nice speakers.
They can handle Daft Punk to your liking? 🙂 I spot a framed album cover on the wall...
Nice speakers.
They can handle Daft Punk to your liking? 🙂 I spot a framed album cover on the wall...
@Peppenino its a touch monitor yes =) JRiver's theater view works flawlessly with touch monitors, @perplexed1ne. thank you! yes my room is almost bare asside from the curtains. i tend to procrastinate when it comes to making SAPs but i recognized that i need some room treatments and i would someday make some but. its hard to do anything when your system is in another house in another city..@zman i love daft punk! too bad they have decided to quit. they can but only at certain level.anway, thank you all for appreciating my posts here =)
@enio nery, great to see that set of speakers again. The original builder is a friend and have heard those way back. Glad that you like the sound character of the pensil with the 10P. what amplifier are you driving it with?
Nice! That's a Class D amp. Are those with the dual 3116 chip?
You should also try it with tube amps .... they sound nice too.
You should also try it with tube amps .... they sound nice too.