Browser caching problem. Try to force a reload of the edited url.
Another variant which avoids browser caching problem is this variant - I use it mostly.
Instead of
Code:
www.diyaudio.com/forums/...-amp-200w8r-400w4r-34.html#post4776326use this variant
Code:
www.diyaudio.com/forums/...-amp-200w8r-400w4r-post4776326.htmlBR, Toni
The links in post1 link by post number
This works for both the default setting and for those that change to more posts per page. I use 20 posts/page and it works as expected.
This works for both the default setting and for those that change to more posts per page. I use 20 posts/page and it works as expected.
What single transformer is needed to build out a 200 / 400 watt amp? Full power... Any recommendations?
I use 600VA , i get 2pcs/600VA for the price of a 1pcs/1000VA (audio grade!).
Again 1000VA to 1500VA price is about the same, torodial transformer (audio grade!).
Again 1000VA to 1500VA price is about the same, torodial transformer (audio grade!).
What do you mean by model. It's 1000 VA with 2x50V. It is Czech made for 230V mains.
I use 2x55V but with PS regulator whit 5 to 6 V drop on both polarity.
Would this one work with the use of individual regulators for each channel for a total of 4? AN-15458 - 1500VA 458V Transformer - AnTek Products Corp
If used with PS regulator you need max 2x55VAC. 1500VA could work with 4 channels, but I don't see why do you need four channels. First finish two boards you have already for long time.
Damir
Hi dadod, I as some others are using different setting for how many posts are shown on each page, which means I am also landing on wrong page.
One thing more to keep in mind regarding post numbering scheme used on DiyA is that there are 2 different post number systems, one is external, the other is internal.
The external post number shown in upper right corner is ok to mention, but keep in mind it is not fixed in case moderators delete or move away some previous posts, however, the internal post number is still fixed.
For instance: your external post number is #1011,
but your internal post number is 4907544 which can be seen from the web link.
http://www.diyaudio.com/forums/solid-state/243481-200w-mosfet-cfa-amp-102.html#post4907544
So if a moderator removes 1 post previous to yours, your new post number changes to #1010, but the internal post number, eg. the whole web link stays intact.
Please see attached picture.TOP
Attachments
Maiko,
firefox and internet explorer allow a right click on the post number icon. select copy shortcut.
That saves the post reference that becomes the link when you paste that into your post.
You don't need to refer to internal and external.
diyaudio.com/forums/solid-state/243481-200w-mosfet-cfa-amp-52.html#post4917274
This is the "copy short cut" for this post. I removed the url+htp+www so that you can see the full address.
It includes no page number, it includes a #postnumber.
It is this #postnumber that is unique and allows the Forum software to take us to that unique post.
Some members use a different method and that gets confusing because the link often goes to the wrong post and/or page.
firefox and internet explorer allow a right click on the post number icon. select copy shortcut.
That saves the post reference that becomes the link when you paste that into your post.
You don't need to refer to internal and external.
diyaudio.com/forums/solid-state/243481-200w-mosfet-cfa-amp-52.html#post4917274
This is the "copy short cut" for this post. I removed the url+htp+www so that you can see the full address.
It includes no page number, it includes a #postnumber.
It is this #postnumber that is unique and allows the Forum software to take us to that unique post.
Some members use a different method and that gets confusing because the link often goes to the wrong post and/or page.
Last edited:
Andrew thanks for pointing that out, I see now I somehow managed to lose the part describing the "right-click copy link location" procedure while I was re-editing and previewing forth and back couple of times.
But one thing I don't manage to do is to make a link become non-hyperlinked by selecting "Remove Link" from the toolbar.
Is that the one that shows as "Remove Link"?
I have never used that, I don't know what it does.
Ksa1381E hfe 157 5.00 ma mouser
Ksc 3503D hfe 75 5.00ma mouser
2sc 3503E. hfe 157 5.00 reichelt not in plastic enclosure
So the cob is about the same not as datasheet on both . Which to prefer in vas
Br.toni
Ksc 3503D hfe 75 5.00ma mouser
2sc 3503E. hfe 157 5.00 reichelt not in plastic enclosure
So the cob is about the same not as datasheet on both . Which to prefer in vas
Br.toni